[PATCH v1 6/9] ARM: dts: Add device tree files for hpe gxp soc

[Hawkins, Nick]

> > 
> > The HPE SoC is new to linux. A basic device tree layout with minimum 
> > required for linux to boot including a timer and watchdog support has 
> > been created.
> > 
> > The dts file is empty at this point but will be updated in subsequent 
> > updates as board specific features are enabled.
> > 
> > Signed-off-by: Nick Hawkins <nick.hawkins at hpe.com>
> > ---
> >  arch/arm/dts/Makefile               |  2 +
> >  arch/arm/dts/hpe-bmc-dl360gen10.dts | 26 ++++++++
> >  arch/arm/dts/hpe-gxp.dtsi           | 95 +++++++++++++++++++++++++++++
> >  3 files changed, 123 insertions(+)
> >  create mode 100644 arch/arm/dts/hpe-bmc-dl360gen10.dts
> >  create mode 100644 arch/arm/dts/hpe-gxp.dtsi

> The dts files need to be in linux-next (or similar) upstream before we start taking them in to Linux, and then re-synced periodically.

Hi Tom,

When you say taking them into Linux do you mean these files for U-Boot would go into Torvalds Linux? Ideally we would like to have the one from Torvalds Linux come into U-boot. Our DTS files are currently here at Linux-next:

https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arch/arm/boot/dts

Thank you for all the feedback you have provided on this and the other patches. I will start working on them.

-Nick