[PATCH v5 2/3] arm: mvebu: add support for Methode eDPU

[Pali Rohár]

On Monday 23 May 2022 11:20:27 Pali Rohár wrote:
> On Monday 23 May 2022 11:18:23 Robert Marko wrote:
> > On Mon, May 23, 2022 at 10:20 AM Pali Rohár <pali at kernel.org> wrote:
> > >
> > > On Friday 20 May 2022 13:46:32 Robert Marko wrote:
> > > > Changes in v4:
> > > > * Remove CMD_PCI as PCI is disabled anyway
> > > >
> > > > Changes in v3:
> > > > * Use DTS-es pending merge upstream
> > > > * Re-enable SCSI as the Armada 37xx BOOT_TARGET_DEVICES defines SCSI device
> > > > as one of the bootable ones.
> > > > We dont have space constraints, so just re-enable SCSI rather than making
> > > > one more config header
> > >
> > > Hello! Is this SCSI error related to distroboot as for NVMe here?
> > > https://patchwork.ozlabs.org/comment/2896154/
> > 
> > Hi Pali, its the same type of error, just for SCSI.
> > I see that you posted a possible solution for cases where boards dont have
> > one of the listed media enabled.
> 
> Ok! I added guard in new patch for all boot targets, including SCSI, so
> it should fix also issue for *DPU boards.

Hello! Patch "Set BOOT_TARGET_DEVICES list to enabled peripherals" is
now in u-boot-marvell tree, so you could send a patch which disables
those unused peripherals in eDPU defconfig file.
https://source.denx.de/u-boot/custodians/u-boot-marvell/-/commits/master/

> > Regards,
> > Robert
> > >
> > > > Changes in v2:
> > > > * Correct the PHY mode to 2500Base-X
> > > > * Add the DTB to Makefile
> > > > * Remove SCSI/SATA, PCI and E1000 from defconfig as they are not present
> > 
> > 
> > 
> > -- 
> > Robert Marko
> > Staff Embedded Linux Engineer
> > Sartura Ltd.
> > Lendavska ulica 16a
> > 10000 Zagreb, Croatia
> > Email: robert.marko at sartura.hr
> > Web: www.sartura.hr