[PATCH 2/8] configs: imx8mm_data_modul_edm_sbc: not select SPL_RAM_DEVICE

[Peng Fan (OSS)]

From: Peng Fan <peng.fan at nxp.com>

i.MX8M use FIT image, not RAW image. And to support binman symbols,
u_boot_any could be optimized if RAW image is not selected, otherwise
there will be build failure. So not select SPL_RAW_DEVICE

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 configs/imx8mm_data_modul_edm_sbc_defconfig | 2 --
 1 file changed, 2 deletions(-)

diff --git a/configs/imx8mm_data_modul_edm_sbc_defconfig b/configs/imx8mm_data_modul_edm_sbc_defconfig
index d55efa6d00e..20ee9877539 100644
--- a/configs/imx8mm_data_modul_edm_sbc_defconfig
+++ b/configs/imx8mm_data_modul_edm_sbc_defconfig
@@ -48,8 +48,6 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_WATCHDOG=y
 CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_HUSH_PARSER=y
-- 
2.36.0