[PATCH v5 2/3] arm: mvebu: add support for Methode eDPU

[Robert Marko]

On Fri, Jun 3, 2022 at 11:42 AM Stefan Roese <sr at denx.de> wrote:
>
> On 02.06.22 23:58, Pali Rohár wrote:
> > On Monday 23 May 2022 11:20:27 Pali Rohár wrote:
> >> On Monday 23 May 2022 11:18:23 Robert Marko wrote:
> >>> On Mon, May 23, 2022 at 10:20 AM Pali Rohár <pali at kernel.org> wrote:
> >>>>
> >>>> On Friday 20 May 2022 13:46:32 Robert Marko wrote:
> >>>>> Changes in v4:
> >>>>> * Remove CMD_PCI as PCI is disabled anyway
> >>>>>
> >>>>> Changes in v3:
> >>>>> * Use DTS-es pending merge upstream
> >>>>> * Re-enable SCSI as the Armada 37xx BOOT_TARGET_DEVICES defines SCSI device
> >>>>> as one of the bootable ones.
> >>>>> We dont have space constraints, so just re-enable SCSI rather than making
> >>>>> one more config header
> >>>>
> >>>> Hello! Is this SCSI error related to distroboot as for NVMe here?
> >>>> https://patchwork.ozlabs.org/comment/2896154/
> >>>
> >>> Hi Pali, its the same type of error, just for SCSI.
> >>> I see that you posted a possible solution for cases where boards dont have
> >>> one of the listed media enabled.
> >>
> >> Ok! I added guard in new patch for all boot targets, including SCSI, so
> >> it should fix also issue for *DPU boards.
> >
> > Hello! Patch "Set BOOT_TARGET_DEVICES list to enabled peripherals" is
> > now in u-boot-marvell tree, so you could send a patch which disables
> > those unused peripherals in eDPU defconfig file.
> > https://source.denx.de/u-boot/custodians/u-boot-marvell/-/commits/master/
>
> Just to clarify: I originally wanted to push those changes in "master"
> upstream beginning of this week. But decided to defer this until the
> next merge window open, as most of them are not bug fixes.
>
> Still Pali's comment is correct. You could already work on a patch using
> these groundwork patches as basis.

No issues, I was waiting for them to be picked into your tree.
I will whip up a patch to disable SCSI now that it's not required anymore.

Regards,
Robert
>
> Thanks,
> Stefan
>
> >>> Regards,
> >>> Robert
> >>>>
> >>>>> Changes in v2:
> >>>>> * Correct the PHY mode to 2500Base-X
> >>>>> * Add the DTB to Makefile
> >>>>> * Remove SCSI/SATA, PCI and E1000 from defconfig as they are not present
> >>>
> >>>
> >>>
> >>> --
> >>> Robert Marko
> >>> Staff Embedded Linux Engineer
> >>> Sartura Ltd.
> >>> Lendavska ulica 16a
> >>> 10000 Zagreb, Croatia
> >>> Email: robert.marko at sartura.hr
> >>> Web: www.sartura.hr
>
> Viele Grüße,
> Stefan Roese
>
> --
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de



-- 
Robert Marko
Staff Embedded Linux Engineer
Sartura Ltd.
Lendavska ulica 16a
10000 Zagreb, Croatia
Email: robert.marko at sartura.hr
Web: www.sartura.hr