[BUG] RockPro64 not booting since 3ae64582fb

[Aleksei]

On 2021-11-13, Tom Rini wrote:
>On Sat, Nov 13, 2021 at 10:41:02AM +0000, Peter Robinson wrote:
>> On Fri, Nov 12, 2021 at 9:43 PM Alper Nebi Yasak
>> <alpernebiyasak at gmail.com> wrote:
>> >
>> > On 12/11/2021 19:39, Tom Rini wrote:
>> > > On Fri, Nov 12, 2021 at 11:35:15AM +0300, Aleksei wrote:
>> > >
>> > >> Hi U-boot developers,
>> > >> I'm booting RockPro64 by writing compiled u-boot-rockchip.bin to SD card offset
>> > >> 64 as described in doc/board/rockchip/rockchip.rst. There is a USB flash drive
>> > >> plugged into USB2 port containing ext4 filesystem with extlinux/exlinux.conf
>> > >> and a kernel+initrd images. This setup boots fine on 02ce99ec91 but not on the
>> > >> next 3ae64582fb. It gets stuck on "Booting using the fdt blob at 0x1f000000".
>> > >>
>> > >> Let me know if I can help debug this. I have a "daily driver" RockPro64 v2.1,
>> > >> can pull from git repos/branches or apply patches to source tree - whichever
>> > >> you prefer.
>> > >
>> > > So the commit in question is enabling USB3.0 support on the board.
>> > > Jagan, Kevar?
>> >
>> > This is probably the same inno-usb2 hang [1] that happens on other
>> > RK3399 boards.
>>
>> Yes, that will be it.
>
>I guess my hope at this point is that someone will pick up and do the
>requested changes, so we can get this long standing issue addressed.
>
>--
>Tom

U-Boot 2022.04 works fine (from SD card, RK3399 TPL method from
doc/README.rockchip).