[PATCH] xilinx: fru: Replace spaces with \0 in detected revision

[Michal Simek]

po 30. 5. 2022 v 13:50 odesílatel Michal Simek <monstr at monstr.eu> napsal:
>
> Also fix board revision field where spaces are used instead of \0.
> The same change was done for board name by commit 530560b6f8eb ("xilinx:
> fru: Replace spaces with \0 in detected name").
>
> Signed-off-by: Michal Simek <michal.simek at amd.com>
> ---
>
>  board/xilinx/common/board.c | 4 ++++
>  1 file changed, 4 insertions(+)
>
> diff --git a/board/xilinx/common/board.c b/board/xilinx/common/board.c
> index 5be3090c3186..629a6ee036ff 100644
> --- a/board/xilinx/common/board.c
> +++ b/board/xilinx/common/board.c
> @@ -245,6 +245,10 @@ static int xilinx_read_eeprom_fru(struct udevice *dev, char *name,
>         }
>         strncpy(desc->revision, (char *)fru_data.brd.rev,
>                 sizeof(desc->revision));
> +       for (i = 0; i < sizeof(desc->revision); i++) {
> +               if (desc->revision[i] == ' ')
> +                       desc->revision[i] = '\0';
> +       }
>         strncpy(desc->serial, (char *)fru_data.brd.serial_number,
>                 sizeof(desc->serial));
>
> --
> 2.36.0
>

Applied.
M

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs