[PATCH 2/8] configs: imx8mm_data_modul_edm_sbc: not select SPL_RAM_DEVICE

[Marek Vasut]

On 6/7/22 19:26, Alper Nebi Yasak wrote:
> On 06/06/2022 17:07, Marek Vasut wrote:
>> On 6/3/22 09:17, Peng Fan (OSS) wrote:
>>> From: Peng Fan <peng.fan at nxp.com>
>>>
>>> i.MX8M use FIT image, not RAW image. And to support binman symbols,
>>> u_boot_any could be optimized if RAW image is not selected, otherwise
>>> there will be build failure. So not select SPL_RAW_DEVICE
>>
>> Is it RAW device/image or RAM device/image ? There seem to be some
>> confusion here. It also seems this might break start of U-Boot by JTAG
>> upload, right ?
> 
> The previous patch disables SPL_RAW_IMAGE_SUPPORT for i.MX8M boards
> (already disabled for this), this one disables SPL_RAM_DEVICE (was only
> enabled for this). Both need to be disabled for this series in its
> current form to avoid a binman symbol-related error, but this commit
> message suffers from being copy-paste of the previous one.

OK, I am really confused now. What binman symbol error ?

Is this some attempt at papering over a bug ?

[...]