[PATCH 12/18] PowerPC: Remove some unused USB code

Tom Rini trini at konsulko.com
Wed Jun 8 14:24:34 CEST 2022


These particular code paths aren't used anymore, remove.

Signed-off-by: Tom Rini <trini at konsulko.com>
---
 arch/powerpc/include/asm/immap_83xx.h | 22 ----------------------
 board/freescale/p2041rdb/p2041rdb.c   |  2 +-
 include/configs/P2041RDB.h            |  5 -----
 include/configs/corenet_ds.h          |  5 -----
 4 files changed, 1 insertion(+), 33 deletions(-)

diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h
index d2443dc90d50..6d1ddbcd27b5 100644
--- a/arch/powerpc/include/asm/immap_83xx.h
+++ b/arch/powerpc/include/asm/immap_83xx.h
@@ -666,19 +666,6 @@ typedef struct immap {
 	u8			res7[0xC0000];
 } immap_t;
 
-#ifndef	CONFIG_ARCH_MPC834X
-#ifdef CONFIG_HAS_FSL_MPH_USB
-#define CONFIG_SYS_MPC83xx_USB1_OFFSET  0x22000	/* use the MPH controller */
-#define CONFIG_SYS_MPC83xx_USB2_OFFSET	0
-#else
-#define CONFIG_SYS_MPC83xx_USB1_OFFSET	0
-#define CONFIG_SYS_MPC83xx_USB2_OFFSET  0x23000	/* use the DR controller */
-#endif
-#else
-#define CONFIG_SYS_MPC83xx_USB1_OFFSET	0x22000
-#define CONFIG_SYS_MPC83xx_USB2_OFFSET  0x23000
-#endif
-
 #elif defined(CONFIG_ARCH_MPC8313)
 typedef struct immap {
 	sysconf83xx_t		sysconf;	/* System configuration */
@@ -944,15 +931,6 @@ struct ccsr_gpio {
 #define CONFIG_SYS_MPC83xx_ESDHC_ADDR \
 			(CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_ESDHC_OFFSET)
 
-#ifndef CONFIG_SYS_MPC83xx_USB1_OFFSET
-#define CONFIG_SYS_MPC83xx_USB1_OFFSET  0x23000
-#endif
-#define CONFIG_SYS_MPC83xx_USB1_ADDR \
-			(CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB1_OFFSET)
-#if defined(CONFIG_ARCH_MPC834X)
-#define CONFIG_SYS_MPC83xx_USB2_ADDR \
-			(CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB2_OFFSET)
-#endif
 #define CONFIG_SYS_LBC_ADDR (&((immap_t *)CONFIG_SYS_IMMR)->im_lbc)
 
 #define CONFIG_SYS_TSEC1_OFFSET		0x24000
diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c
index 5bd2b9950602..2a84e9bdf556 100644
--- a/board/freescale/p2041rdb/p2041rdb.c
+++ b/board/freescale/p2041rdb/p2041rdb.c
@@ -229,7 +229,7 @@ int ft_board_setup(void *blob, struct bd_info *bd)
 
 	fdt_fixup_memory(blob, (u64)base, (u64)size);
 
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
+#if defined(CONFIG_HAS_FSL_DR_USB)
 	fsl_fdt_fixup_dr_usb(blob, bd);
 #endif
 
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 261e9872a7a1..38acb38690d8 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -373,11 +373,6 @@
 #define CONFIG_LOADS_ECHO		/* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
 
-/*
-* USB
-*/
-#define CONFIG_HAS_FSL_MPH_USB
-
 #ifdef CONFIG_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index ce9e51170582..56b56e8a2e2c 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -371,11 +371,6 @@
 #define CONFIG_LOADS_ECHO		/* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
 
-/*
-* USB
-*/
-#define CONFIG_HAS_FSL_MPH_USB
-
 #ifdef CONFIG_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
-- 
2.25.1



More information about the U-Boot mailing list