[PATCH] kontron-sl-mx8mm: Add CAAM support

[Fabio Estevam]

Add CAAM support, which is required when enabling HAB secure boot.

Select CONFIG_SPL_DRIVERS_MISC so that CONFIG_IMX_HAB could
build successfully, if selected.

Signed-off-by: Fabio Estevam <festevam at denx.de>
---
 arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi | 17 +++++++++++++++++
 arch/arm/mach-imx/imx8m/Kconfig               |  3 +++
 board/kontron/sl-mx8mm/spl.c                  |  9 +++++++++
 configs/kontron-sl-mx8mm_defconfig            |  1 +
 4 files changed, 30 insertions(+)

diff --git a/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi b/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi
index 22d18e6f1cf8..11d915310f74 100644
--- a/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi
@@ -25,6 +25,23 @@
 	};
 };
 
+&crypto {
+	u-boot,dm-spl;
+};
+
+&sec_jr0 {
+	u-boot,dm-spl;
+	status = "disabled";
+};
+
+&sec_jr1 {
+	u-boot,dm-spl;
+};
+
+&sec_jr2 {
+	u-boot,dm-spl;
+};
+
 &fec1 {
 	phy-mode = "rgmii-rxid";
 };
diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
index 61397bf88d13..5c59422ecb79 100644
--- a/arch/arm/mach-imx/imx8m/Kconfig
+++ b/arch/arm/mach-imx/imx8m/Kconfig
@@ -106,6 +106,9 @@ config TARGET_KONTRON_MX8MM
 	select IMX8MM
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
+	select FSL_CAAM
+	select ARCH_MISC_INIT
+	select SPL_CRYPTO if SPL
 
 config TARGET_IMX8MN_BSH_SMM_S2
 	bool "imx8mn-bsh-smm-s2"
diff --git a/board/kontron/sl-mx8mm/spl.c b/board/kontron/sl-mx8mm/spl.c
index 4ef03c8c172f..5a513722c5d5 100644
--- a/board/kontron/sl-mx8mm/spl.c
+++ b/board/kontron/sl-mx8mm/spl.c
@@ -13,6 +13,9 @@
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/iomux-v3.h>
 #include <dm/uclass.h>
+#include <dm/device.h>
+#include <dm/uclass-internal.h>
+#include <dm/device-internal.h>
 #include <hang.h>
 #include <i2c.h>
 #include <init.h>
@@ -213,6 +216,12 @@ void spl_board_init(void)
 	struct udevice *dev;
 	int ret;
 
+	if (IS_ENABLED(CONFIG_FSL_CAAM)) {
+		ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(caam_jr), &dev);
+		if (ret)
+			printf("Failed to initialize %s: %d\n", dev->name, ret);
+	}
+
 	puts("Normal Boot\n");
 
 	ret = uclass_get_device_by_name(UCLASS_CLK,
diff --git a/configs/kontron-sl-mx8mm_defconfig b/configs/kontron-sl-mx8mm_defconfig
index 2e9d52522b21..eae9ac0dbebf 100644
--- a/configs/kontron-sl-mx8mm_defconfig
+++ b/configs/kontron-sl-mx8mm_defconfig
@@ -16,6 +16,7 @@ CONFIG_SPL_TEXT_BASE=0x7E1000
 CONFIG_TARGET_KONTRON_MX8MM=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SPL=y
 CONFIG_SYS_LOAD_ADDR=0x42000000
-- 
2.25.1