[PATCH 08/10] tools: zynqmp_psu_init_minimize: Remove low level uart settings

[Stefan Herbrechtsmeier]

From: Stefan Herbrechtsmeier <stefan.herbrechtsmeier at weidmueller.com>

There is no reason to do serial initialization. Uart driver does it
already based on DT. Good effect is that it is clear which interface is
console.
The resulting change was done in past by commit 84d2bbf082fa ("arm64:
zynqmp: Remove low level UART setting").

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier at weidmueller.com>
---

 tools/zynqmp_psu_init_minimize.sh | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/tools/zynqmp_psu_init_minimize.sh b/tools/zynqmp_psu_init_minimize.sh
index 4ee418f07e..31fbeac327 100755
--- a/tools/zynqmp_psu_init_minimize.sh
+++ b/tools/zynqmp_psu_init_minimize.sh
@@ -2,6 +2,8 @@
 # SPDX-License-Identifier: GPL-2.0+
 # Copyright (C) 2018 Michal Simek <michal.simek at xilinx.com>
 # Copyright (C) 2019 Luca Ceresoli <luca at lucaceresoli.net>
+# Copyright (C) 2022 Weidmüller Interface GmbH & Co. KG
+# Stefan Herbrechtsmeier <stefan.herbrechtsmeier at weidmueller.com>
 
 usage()
 {
@@ -144,4 +146,19 @@ sed -i -r 's|\((._code .= [x[:xdigit:]]+)\)|\1|g' ${TMP}
 # Convert back newlines
 tr "\r" "\n" <${TMP} >${OUT}
 
+# Remove unnecessary settings
+# - Low level UART
+SETTINGS_TO_REMOVE="0xFF000000
+0xFF000004
+0xFF000018
+0xFF000034
+0xFF010000
+0xFF010004
+0xFF010018
+0xFF010034
+"
+for i in $SETTINGS_TO_REMOVE; do
+sed -i "/^\tpsu_mask_write($i,.*$/d" ${OUT}
+done
+
 rm ${TMP}
-- 
2.30.2