[PATCH 1/4] configs: imx8mn_bsh_smm_s2: add NAND driver

[Dario Binacchi]

It allows to boot from NAND.

Co-developed-by: Michael Trimarchi <michael at amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael at amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>
---

 configs/imx8mn_bsh_smm_s2_defconfig | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/configs/imx8mn_bsh_smm_s2_defconfig b/configs/imx8mn_bsh_smm_s2_defconfig
index 49f425300151..08f52e50609b 100644
--- a/configs/imx8mn_bsh_smm_s2_defconfig
+++ b/configs/imx8mn_bsh_smm_s2_defconfig
@@ -30,8 +30,10 @@ CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
+CONFIG_SPL_DMA=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MTD_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_POWER=y
 CONFIG_SPL_WATCHDOG=y
 CONFIG_SYS_PROMPT="> "
@@ -65,6 +67,9 @@ CONFIG_SYS_NAND_USE_FLASH_BBT=y
 CONFIG_NAND_MXS=y
 CONFIG_NAND_MXS_DT=y
 CONFIG_SYS_NAND_ONFI_DETECTION=y
+CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
+CONFIG_SYS_NAND_U_BOOT_OFFS=0xD8000
+CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND=0x4058000
 CONFIG_PHYLIB=y
 CONFIG_PHY_NXP_TJA11XX=y
 CONFIG_DM_ETH=y
-- 
2.32.0