[PATCH v3 0/7] Add support for FlexSPI Boot for i.MX8m

Mamta Shukla mamta.shukla at leica-geosystems.com
Thu Jun 9 16:55:22 CEST 2022


This series of patch adds support for generating FlexSPI Header file
and booting from QSPI on i.MX8m.

Changes in v2:
-Add check for error in case open() for fspi_fd in imx8mkimage.c fails
-Remove extra line in commit message
-Remove extra line in imx8mm_evk_fspi_defconfig
-New patch in series to add an entry for imx8mm_evk_fspi_defconfig in
board/freescale/imx8mm_evk/MAINTAINERS
-New patch in series to add instructions to build and boot from QSPI Flash

Changes in v3:
-Fix Checkpatch ERROR: code indent should use tabs where possible
-Fix Checkpatch ERROR for trailing spaces   

Mamta Shukla (7):
  tools: mkimage: Add support to generate FlexSPI Header for i.MX8m
  dts: imx8mm-uboot: Add support to pack FlexSPI Header using binman
  configs: Add config for enabling FSPI boot option for i.MX8m
  board: freescale: Add QSPI Boot support in spl for i.MX8m
  configs: imx8mm: Define CONFIG_SYS_UBOOT_BASE for i.MX8m
  board: freescale: Add entry for imx8mm_evk_fspi_defconfig
  doc: board: nxp: Add instructions to boot from QSPI

 arch/arm/dts/imx8mm-u-boot.dtsi               |  20 +++
 board/freescale/imx8mm_evk/MAINTAINERS        |   1 +
 .../imx8mm_evk/imximage-8mm-lpddr4-fspi.cfg   |   9 ++
 board/freescale/imx8mm_evk/spl.c              |   2 +
 configs/imx8mm_evk_fspi_defconfig             | 115 ++++++++++++++++++
 doc/board/nxp/imx8mm_evk.rst                  |  37 +++++-
 include/configs/imx8mm_evk.h                  |   7 +-
 include/imximage.h                            |  38 ++++++
 tools/Kconfig                                 |  59 +++++++++
 tools/imx8mimage.c                            |  81 +++++++++++-
 10 files changed, 362 insertions(+), 7 deletions(-)
 create mode 100644 board/freescale/imx8mm_evk/imximage-8mm-lpddr4-fspi.cfg
 create mode 100644 configs/imx8mm_evk_fspi_defconfig

-- 
2.25.1



More information about the U-Boot mailing list