[PATCH] crypto: fsl_hash: Remove unnecessary alignment check in, caam_hash()

[Michal Vokáč]

On 10. 06. 22 13:47, Fabio Estevam wrote:
> [EXTERNAL EMAIL]
> 
> Hi Michal,
> 
> On Fri, Jun 10, 2022 at 7:02 AM Michal Vokáč <michal.vokac at ysoft.com> wrote:
> 
>> Hi Fabio,
>> I had the very same problem/error on i.MX6 and figured out that
>> CONFIG_ARCH_MISC_INIT=y must be enabled otherwise the caam_jr driver
>> is not initialized.
> 
> Yes, correct. There is a patch from Gaurav to address this:
> https://lists.denx.de/pipermail/u-boot/2022-June/485959.html

OK, thanks for the reference. It took me some time to reply to the thread
and this patch came in the meantime.

>>        Hash algo:    sha256
>>        Hash value:   13e0b23bd49f9e86a0425080fc788db67bf318d6f103f217d5705a455737e91c
>>      Verifying Hash Integrity ... sha256CACHE: Misaligned operation at range [122c4604, 122ce684]
>> + OK
>>      Loading fdt from 0x122c4604 to 0x18000000
>>      Booting using the fdt blob at 0x18000000
>>      Loading Kernel Image
>>      Using Device Tree in place at 18000000, end 1800d04d
> 
> On a imx6sabresd the board simply hangs in SPL, when CONFIG_IMX_HAB=y:
> https://lists.denx.de/pipermail/u-boot/2022-June/485993.html
> 
> Does your board use SPL?

Normally it does but I am not that far yet.
We are in a process of upgrade from v2019.07 to the latest version
and moving everything from the legacy support to the driver model etc.
is quite challenging.

So far I am building just the non-SPL version and loading it over
the NXP uuu tool to fail-fast.

I expect ton of new problems once I move to the SPL version :)

Regards,
Michal