[PATCH V2 06/17] imx: imx8mn_var_som: enable DM_SERIAL

[Peng Fan (OSS)]

From: Peng Fan <peng.fan at nxp.com>

Enable CONFIG_DM_SERIAL. uart and its pinmux was already
marked with u-boot,dm-spl.
Move preloader_console_init after spl_init to make sure driver
model work.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
Reviewed-by: Ariel D'Alessandro <ariel.dalessandro at collabora.com>
Reviewed-by: Fabio Estevam <festevam at denx.de>
---
 board/variscite/imx8mn_var_som/spl.c | 11 ++---------
 configs/imx8mn_var_som_defconfig     |  1 +
 include/configs/imx8mn_var_som.h     |  2 --
 3 files changed, 3 insertions(+), 11 deletions(-)

diff --git a/board/variscite/imx8mn_var_som/spl.c b/board/variscite/imx8mn_var_som/spl.c
index 32703c5f0b3..1a8b64fc0a9 100644
--- a/board/variscite/imx8mn_var_som/spl.c
+++ b/board/variscite/imx8mn_var_som/spl.c
@@ -40,14 +40,8 @@ void spl_board_init(void)
 		puts("Failed to find clock node. Check device tree\n");
 }
 
-#define UART_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_FSEL1)
 #define WDOG_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
 
-static const iomux_v3_cfg_t uart_pads[] = {
-	IMX8MN_PAD_UART4_RXD__UART4_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
-	IMX8MN_PAD_UART4_TXD__UART4_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
 static const iomux_v3_cfg_t wdog_pads[] = {
 	IMX8MN_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
 };
@@ -59,7 +53,6 @@ int board_early_init_f(void)
 	imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
 	set_wdog_reset(wdog);
 
-	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
 	init_uart_clk(3);
 
 	return 0;
@@ -78,14 +71,14 @@ void board_init_f(ulong dummy)
 
 	timer_init();
 
-	preloader_console_init();
-
 	ret = spl_init();
 	if (ret) {
 		debug("spl_init() failed: %d\n", ret);
 		hang();
 	}
 
+	preloader_console_init();
+
 	/* DDR initialization */
 	spl_dram_init();
 
diff --git a/configs/imx8mn_var_som_defconfig b/configs/imx8mn_var_som_defconfig
index 898f3f2f9f6..889bcf7dc58 100644
--- a/configs/imx8mn_var_som_defconfig
+++ b/configs/imx8mn_var_som_defconfig
@@ -96,6 +96,7 @@ CONFIG_SPL_DM_PMIC_BD71837=y
 CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
 CONFIG_SYSRESET=y
 CONFIG_SYSRESET_PSCI=y
diff --git a/include/configs/imx8mn_var_som.h b/include/configs/imx8mn_var_som.h
index ce679098e5c..ccf83128f28 100644
--- a/include/configs/imx8mn_var_som.h
+++ b/include/configs/imx8mn_var_som.h
@@ -53,8 +53,6 @@
 #define PHYS_SDRAM			0x40000000
 #define PHYS_SDRAM_SIZE			SZ_1G /* 1GB DDR */
 
-#define CONFIG_MXC_UART_BASE		UART_BASE_ADDR(4)
-
 /* USDHC */
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 
-- 
2.36.0