[PATCH V2 32/48] imx: imx9: Add M33 release prepare function
Peng Fan (OSS)
peng.fan at oss.nxp.com
Sat Jun 11 15:20:18 CEST 2022
From: Peng Fan <peng.fan at nxp.com>
To support on-demand booting M33 image from A core. SPL needs
to follow M33 kick up sequence to release M33 firstly,
then set M33 CPUWAIT signal. ATF will clear CPUWAIT to kick
M33 to run.
The prepare function also works around the M33 TCM ECC issue by
clean the TCM. Also enable sentinel handshake and WDOG1 clock
for M33 stop and reset.
Signed-off-by: Ye Li <ye.li at nxp.com>
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
arch/arm/include/asm/arch-imx9/sys_proto.h | 2 +
arch/arm/mach-imx/imx9/soc.c | 51 ++++++++++++++++++++++
2 files changed, 53 insertions(+)
diff --git a/arch/arm/include/asm/arch-imx9/sys_proto.h b/arch/arm/include/asm/arch-imx9/sys_proto.h
index 5ae7a043398..ba97f92f5ae 100644
--- a/arch/arm/include/asm/arch-imx9/sys_proto.h
+++ b/arch/arm/include/asm/arch-imx9/sys_proto.h
@@ -9,4 +9,6 @@
#include <asm/mach-imx/sys_proto.h>
void soc_power_init(void);
+bool m33_is_rom_kicked(void);
+int m33_prepare(void);
#endif
diff --git a/arch/arm/mach-imx/imx9/soc.c b/arch/arm/mach-imx/imx9/soc.c
index c2cd4060722..135a5f1f107 100644
--- a/arch/arm/mach-imx/imx9/soc.c
+++ b/arch/arm/mach-imx/imx9/soc.c
@@ -13,6 +13,7 @@
#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
+#include <asm/arch/ccm_regs.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/trdc.h>
#include <asm/mach-imx/boot_mode.h>
@@ -378,3 +379,53 @@ void soc_power_init(void)
disable_isolation();
}
+
+static bool m33_is_rom_kicked(void)
+{
+ struct blk_ctrl_s_aonmix_regs *s_regs =
+ (struct blk_ctrl_s_aonmix_regs *)BLK_CTRL_S_ANOMIX_BASE_ADDR;
+
+ if (!(readl(&s_regs->m33_cfg) & BIT(2)))
+ return true;
+
+ return false;
+}
+
+int m33_prepare(void)
+{
+ struct src_mix_slice_regs *mix_regs =
+ (struct src_mix_slice_regs *)(ulong)(SRC_IPS_BASE_ADDR + 0x400 * (SRC_MIX_CM33 + 1));
+ struct src_general_regs *global_regs =
+ (struct src_general_regs *)(ulong)SRC_GLOBAL_RBASE;
+ struct blk_ctrl_s_aonmix_regs *s_regs =
+ (struct blk_ctrl_s_aonmix_regs *)BLK_CTRL_S_ANOMIX_BASE_ADDR;
+ u32 val;
+
+ if (m33_is_rom_kicked())
+ return -EPERM;
+
+ /* Release reset of M33 */
+ setbits_le32(&global_regs->scr, BIT(0));
+
+ /* Check the reset released in M33 MIX func stat */
+ val = readl(&mix_regs->func_stat);
+ while (!(val & SRC_MIX_SLICE_FUNC_STAT_RST_STAT))
+ val = readl(&mix_regs->func_stat);
+
+ /* Release Sentinel TROUT */
+ ahab_release_m33_trout();
+
+ /* Mask WDOG1 IRQ from A55, we use it for M33 reset */
+ setbits_le32(&s_regs->ca55_irq_mask[1], BIT(6));
+
+ /* Turn on WDOG1 clock */
+ ccm_lpcg_on(CCGR_WDG1, 1);
+
+ /* Set sentinel LP handshake for M33 reset */
+ setbits_le32(&s_regs->lp_handshake[0], BIT(6));
+
+ /* Clear M33 TCM for ECC */
+ memset((void *)(ulong)0x201e0000, 0, 0x40000);
+
+ return 0;
+}
--
2.36.0
More information about the U-Boot
mailing list