[PATCH] arm64: dts: imx8mq-kontron-pitx-imx8m-u-boot.dtsi: disable assigned clocks

[Heiko Thiery]

Hi Marek,

Am Sa., 11. Juni 2022 um 12:15 Uhr schrieb Marek Vasut <marex at denx.de>:
>
> On 6/11/22 08:09, Heiko Thiery wrote:
> > With the move to use DM_CLK the boards uart stops working. The used
> > properties are not supported by the imx8mq clock driver. Thus
> > the correct baudrate cannot be selected. Remove this properties here and
> > the board can start with working uart. Keep it in the main dts because
> > linux handles these porperties fine.
>
> Is this yet another
>
> 75f080df46f ("Revert "clk: Detect failure to set defaults"")
>
> kind of failure, where the clock uclass returns error code on something?
>
> Maybe the clock uclass should rather warn than fail outright, so we
> won't need these workarounds in DT files ?

I think this is another kind of issue here. I had already tried to
solve the problem [1], but had not been able to follow it through to
the end.

Maybe now is the right time to tackle it again. But due to lack of
time i can't say when i will get to it yet.

[1] https://patchwork.ozlabs.org/project/uboot/patch/20220317124127.1783768-1-heiko.thiery@gmail.com/

-- 
Heiko