[PATCH 4/5] board: ti: am62x: Account for DDR size fixups if ECC is enabled
Georgi Vlaev
g-vlaev at ti.com
Tue Jun 14 16:45:33 CEST 2022
Call into k3-ddrss driver to fixup device tree and resize
the available amount of DDR if ECC is enabled.
A second fixup is required from A53 SPL to take the fixup
as done from R5 SPL and apply it to DT passed to A53 U-boot,
which in turn passes this to the OS.
Signed-off-by: Georgi Vlaev <g-vlaev at ti.com>
---
board/ti/am62x/evm.c | 53 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/board/ti/am62x/evm.c b/board/ti/am62x/evm.c
index fb5106d1f3c8..d65ee1d69606 100644
--- a/board/ti/am62x/evm.c
+++ b/board/ti/am62x/evm.c
@@ -9,6 +9,8 @@
#include <asm/io.h>
#include <spl.h>
+#include <dm/uclass.h>
+#include <k3-ddrss.h>
#include <fdt_support.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
@@ -30,3 +32,54 @@ int dram_init_banksize(void)
{
return fdtdec_setup_memory_banksize();
}
+
+#if defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_K3_AM64_DDRSS)
+static void fixup_ddr_driver_for_ecc(struct spl_image_info *spl_image)
+{
+ struct udevice *dev;
+ int ret;
+
+ dram_init_banksize();
+
+ ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+ if (ret)
+ panic("Cannot get RAM device for ddr size fixup: %d\n", ret);
+
+ ret = k3_ddrss_ddr_fdt_fixup(dev, spl_image->fdt_addr, gd->bd);
+ if (ret)
+ printf("Error fixing up ddr node for ECC use! %d\n", ret);
+}
+#else
+static void fixup_memory_node(struct spl_image_info *spl_image)
+{
+ u64 start[CONFIG_NR_DRAM_BANKS];
+ u64 size[CONFIG_NR_DRAM_BANKS];
+ int bank;
+ int ret;
+
+ dram_init();
+ dram_init_banksize();
+
+ for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
+ start[bank] = gd->bd->bi_dram[bank].start;
+ size[bank] = gd->bd->bi_dram[bank].size;
+ }
+
+ /* dram_init functions use SPL fdt, and we must fixup u-boot fdt */
+ ret = fdt_fixup_memory_banks(spl_image->fdt_addr, start, size,
+ CONFIG_NR_DRAM_BANKS);
+ if (ret)
+ printf("Error fixing up memory node! %d\n", ret);
+}
+#endif
+
+void spl_perform_fixups(struct spl_image_info *spl_image)
+{
+#if defined(CONFIG_K3_AM64_DDRSS)
+ fixup_ddr_driver_for_ecc(spl_image);
+#else
+ fixup_memory_node(spl_image);
+#endif
+}
+#endif
--
2.30.2
More information about the U-Boot
mailing list