[PATCH 4/6] ARM: dts: stm32: Add alternate pinmux for CAN1 pins

[Patrice CHOTARD]

Hi Marek

On 6/13/22 11:55, Marek Vasut wrote:
> Add another mux option for CAN1 pins, this is used on DRC Compact board.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Patrice Chotard <patrice.chotard at foss.st.com>
> Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
>  arch/arm/dts/stm32mp15-pinctrl.dtsi | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi
> index 6a5b4016f66..e0965c5936e 100644
> --- a/arch/arm/dts/stm32mp15-pinctrl.dtsi
> +++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi
> @@ -929,6 +929,26 @@
>  		};
>  	};
>  
> +	m_can1_pins_c: m-can1-2 {
> +		pins1 {
> +			pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
> +			slew-rate = <1>;
> +			drive-push-pull;
> +			bias-disable;
> +		};
> +		pins2 {
> +			pinmux = <STM32_PINMUX('H', 14, AF9)>; /* CAN1_RX */
> +			bias-disable;
> +		};
> +	};
> +
> +	m_can1_sleep_pins_c: m_can1-sleep-2 {
> +		pins {
> +			pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */
> +				 <STM32_PINMUX('H', 14, ANALOG)>; /* CAN1_RX */
> +		};
> +	};
> +
>  	m_can2_pins_a: m-can2-0 {
>  		pins1 {
>  			pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */

Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>

Thanks
Patrice