[PATCH v5 11/23] mkeficapsule: Add support for generating empty capsules
Sughosh Ganu
sughosh.ganu at linaro.org
Wed Jun 15 12:49:56 CEST 2022
On Wed, 15 Jun 2022 at 10:41, Takahiro Akashi
<takahiro.akashi at linaro.org> wrote:
>
> On Thu, Jun 09, 2022 at 05:59:58PM +0530, Sughosh Ganu wrote:
> > The Dependable Boot specification[1] describes the structure of the
> > firmware accept and revert capsules. These are empty capsules which
> > are used for signalling the acceptance or rejection of the updated
> > firmware by the OS. Add support for generating these empty capsules.
> >
> > [1] - https://git.codelinaro.org/linaro/dependable-boot/mbfw/uploads/6f7ddfe3be24e18d4319e108a758d02e/mbfw.pdf
> >
> > Signed-off-by: Sughosh Ganu <sughosh.ganu at linaro.org>
> > ---
> > doc/mkeficapsule.1 | 29 ++++++---
> > tools/eficapsule.h | 8 +++
> > tools/mkeficapsule.c | 139 +++++++++++++++++++++++++++++++++++++------
> > 3 files changed, 151 insertions(+), 25 deletions(-)
> >
> > diff --git a/doc/mkeficapsule.1 b/doc/mkeficapsule.1
> > index 09bdc24295..77ca061efd 100644
> > --- a/doc/mkeficapsule.1
> > +++ b/doc/mkeficapsule.1
> > @@ -8,7 +8,7 @@ mkeficapsule \- Generate EFI capsule file for U-Boot
> >
> > .SH SYNOPSIS
> > .B mkeficapsule
> > -.RI [ options "] " image-blob " " capsule-file
> > +.RI [ options ] " " [ image-blob ] " " capsule-file
> >
> > .SH "DESCRIPTION"
> > .B mkeficapsule
> > @@ -23,8 +23,13 @@ Optionally, a capsule file can be signed with a given private key.
> > In this case, the update will be authenticated by verifying the signature
> > before applying.
> >
> > +Additionally, an empty capsule file can be generated for acceptance or
> > +rejection of firmware images by a governing component like an Operating
> > +System. The empty capsules do not require an image-blob input file.
> > +
> > +
> > .B mkeficapsule
> > -takes any type of image files, including:
> > +takes any type of image files when generating non empty capsules, including:
> > .TP
> > .I raw image
> > format is a single binary blob of any type of firmware.
> > @@ -36,18 +41,16 @@ multiple binary blobs in a single capsule file.
> > This type of image file can be generated by
> > .BR mkimage .
> >
> > -.PP
> > -If you want to use other types than above two, you should explicitly
> > -specify a guid for the FMP driver.
> > -
> > .SH "OPTIONS"
> > +
> > .TP
> > .BI "-g\fR,\fB --guid " guid-string
> > Specify guid for image blob type. The format is:
> > xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
> >
> > The first three elements are in little endian, while the rest
> > -is in big endian.
> > +is in big endian. The option must be specified for all non empty and
> > +image acceptance capsules
>
> "image acceptance" -> "firmware acceptance"
Okay
>
> I don't still understand why we need a guid for acceptance
> while revert doesn't require it.
> I believe that firmware update is "all or nothing", isn't it?
I believe this gives more flexibility in that different components
might be required to accept the various firmware images. So, one
component might accept the optee_os, while another might be
responsible for accepting u-boot. In any case, we do check that all
the components have their accepted bit set, and only if so, does the
bank boot in the regular state. In case of a firmware revert, it would
not matter which firmware component is being reverted -- the platform
would simply need to boot from the other bank. Do you see any issue
with the current method that we have?
>
> If there is a good reason, please describe a possible/expected
> scenario.
Where do you want me to explain this, in the feature documentation? Or
do you think this can be elaborated in greater detail in the spec.
>
> > .TP
> > .BI "-i\fR,\fB --index " index
> > @@ -57,6 +60,18 @@ Specify an image index
> > .BI "-I\fR,\fB --instance " instance
> > Specify a hardware instance
> >
> > +.PP
> > +For generation of firmware accept empty capsule
> > +.BR --guid
> > +is mandatory
> > +.TP
> > +.BI "-A\fR,\fB --fw-accept "
> > +Generate a firmware acceptance empty capsule
> > +
> > +.TP
> > +.BI "-R\fR,\fB --fw-revert "
> > +Generate a firmware revert empty capsule
> > +
> > .TP
> > .BR -h ", " --help
> > Print a help message
> > diff --git a/tools/eficapsule.h b/tools/eficapsule.h
> > index d63b831443..072a4b5598 100644
> > --- a/tools/eficapsule.h
> > +++ b/tools/eficapsule.h
> > @@ -41,6 +41,14 @@ typedef struct {
> > EFI_GUID(0x4aafd29d, 0x68df, 0x49ee, 0x8a, 0xa9, \
> > 0x34, 0x7d, 0x37, 0x56, 0x65, 0xa7)
> >
> > +#define FW_ACCEPT_OS_GUID \
> > + EFI_GUID(0x0c996046, 0xbcc0, 0x4d04, 0x85, 0xec, \
> > + 0xe1, 0xfc, 0xed, 0xf1, 0xc6, 0xf8)
> > +
> > +#define FW_REVERT_OS_GUID \
> > + EFI_GUID(0xacd58b4b, 0xc0e8, 0x475f, 0x99, 0xb5, \
> > + 0x6b, 0x3f, 0x7e, 0x07, 0xaa, 0xf0)
> > +
> > /* flags */
> > #define CAPSULE_FLAGS_PERSIST_ACROSS_RESET 0x00010000
> >
> > diff --git a/tools/mkeficapsule.c b/tools/mkeficapsule.c
> > index 5f74d23b9e..e8eb6b070d 100644
> > --- a/tools/mkeficapsule.c
> > +++ b/tools/mkeficapsule.c
> > @@ -29,7 +29,16 @@ static const char *tool_name = "mkeficapsule";
> > efi_guid_t efi_guid_fm_capsule = EFI_FIRMWARE_MANAGEMENT_CAPSULE_ID_GUID;
> > efi_guid_t efi_guid_cert_type_pkcs7 = EFI_CERT_TYPE_PKCS7_GUID;
> >
> > -static const char *opts_short = "g:i:I:v:p:c:m:dh";
> > +static const char *opts_short = "g:i:I:v:p:c:m:dhAR";
> > +
> > +static bool empty_capsule;
> > +static unsigned char capsule;
> > +
> > +enum {
> > + CAPSULE_NORMAL_BLOB = 0,
> > + CAPSULE_ACCEPT,
> > + CAPSULE_REVERT,
> > +} capsule_type;
> >
> > static struct option options[] = {
> > {"guid", required_argument, NULL, 'g'},
> > @@ -39,24 +48,47 @@ static struct option options[] = {
> > {"certificate", required_argument, NULL, 'c'},
> > {"monotonic-count", required_argument, NULL, 'm'},
> > {"dump-sig", no_argument, NULL, 'd'},
> > + {"fw-accept", no_argument, NULL, 'A'},
> > + {"fw-revert", no_argument, NULL, 'R'},
> > {"help", no_argument, NULL, 'h'},
> > {NULL, 0, NULL, 0},
> > };
> >
> > static void print_usage(void)
> > {
> > - fprintf(stderr, "Usage: %s [options] <image blob> <output file>\n"
> > - "Options:\n"
> > -
> > - "\t-g, --guid <guid string> guid for image blob type\n"
> > - "\t-i, --index <index> update image index\n"
> > - "\t-I, --instance <instance> update hardware instance\n"
> > - "\t-p, --private-key <privkey file> private key file\n"
> > - "\t-c, --certificate <cert file> signer's certificate file\n"
> > - "\t-m, --monotonic-count <count> monotonic count\n"
> > - "\t-d, --dump_sig dump signature (*.p7)\n"
> > - "\t-h, --help print a help message\n",
> > - tool_name);
> > + if (empty_capsule) {
> > + if (capsule == CAPSULE_ACCEPT) {
> > + fprintf(stderr, "Usage: %s [options] <output file>\n",
> > + tool_name);
> > + fprintf(stderr, "Options:\n"
> > + "\t-A, --fw-accept firmware accept capsule\n"
> > + "\t-g, --guid <guid string> guid for image blob type\n"
> > + "\t-h, --help print a help message\n"
> > + );
> > + } else {
> > + fprintf(stderr, "Usage: %s [options] <output file>\n",
> > + tool_name);
> > + fprintf(stderr, "Options:\n"
> > + "\t-R, --fw-revert firmware revert capsule\n"
> > + "\t-h, --help print a help message\n"
> > + );
> > + }
> > + } else {
> > + fprintf(stderr, "Usage: %s [options] <image blob> <output file>\n"
> > + "Options:\n"
> > +
> > + "\t-g, --guid <guid string> guid for image blob type\n"
> > + "\t-i, --index <index> update image index\n"
> > + "\t-I, --instance <instance> update hardware instance\n"
> > + "\t-p, --private-key <privkey file> private key file\n"
> > + "\t-c, --certificate <cert file> signer's certificate file\n"
> > + "\t-m, --monotonic-count <count> monotonic count\n"
> > + "\t-d, --dump_sig dump signature (*.p7)\n"
> > + "\t-A, --fw-accept firmware accept capsule\n"
> > + "\t-R, --fw-revert firmware revert capsule\n"
> > + "\t-h, --help print a help message\n",
> > + tool_name);
> > + }
> > }
> >
> > /**
> > @@ -564,6 +596,50 @@ void convert_uuid_to_guid(unsigned char *buf)
> > buf[7] = c;
> > }
> >
> > +static int create_empty_capsule(char *path, efi_guid_t *guid, bool fw_accept)
> > +{
> > + struct efi_capsule_header header;
> > + FILE *f = NULL;
> > + int ret = -1;
> > + efi_guid_t fw_accept_guid = FW_ACCEPT_OS_GUID;
> > + efi_guid_t fw_revert_guid = FW_REVERT_OS_GUID;
> > + efi_guid_t payload, capsule_guid;
> > +
> > + f = fopen(path, "w");
> > + if (!f) {
> > + fprintf(stderr, "cannot open %s\n", path);
> > + goto err;
> > + }
> > +
> > + capsule_guid = fw_accept ? fw_accept_guid : fw_revert_guid;
> > +
> > + memcpy(&header.capsule_guid, &capsule_guid, sizeof(efi_guid_t));
>
> -> guidcpy()
This being a host tool, guidcpy cannot be used. You have used memcpy
in the create_fwbin() for the same reason I guess.
>
> > + header.header_size = sizeof(header);
> > + header.flags = 0;
> > +
> > + header.capsule_image_size = fw_accept ?
> > + sizeof(header) + sizeof(efi_guid_t) : sizeof(header);
> > +
> > + if (write_capsule_file(f, &header, sizeof(header),
> > + "Capsule header"))
> > + goto err;
> > +
> > + if (fw_accept) {
> > + memcpy(&payload, guid, sizeof(efi_guid_t));
>
> ditto
Same as above.
>
> > + if (write_capsule_file(f, &payload, sizeof(payload),
> > + "FW Accept Capsule Payload"))
> > + goto err;
> > + }
> > +
> > + ret = 0;
> > +
> > +err:
> > + if (f)
> > + fclose(f);
> > +
> > + return ret;
> > +}
> > +
> > /**
> > * main - main entry function of mkeficapsule
> > * @argc: Number of arguments
> > @@ -639,22 +715,49 @@ int main(int argc, char **argv)
> > case 'd':
> > dump_sig = 1;
> > break;
> > + case 'A':
> > + capsule |= CAPSULE_ACCEPT;
> > + break;
> > + case 'R':
> > + capsule |= CAPSULE_REVERT;
> > + break;
> > case 'h':
> > print_usage();
> > exit(EXIT_SUCCESS);
> > }
> > }
> >
> > + if (capsule == (CAPSULE_ACCEPT | CAPSULE_REVERT)) {
> > + fprintf(stderr,
> > + "Select either of Accept or Revert capsule generation\n");
> > + exit(EXIT_FAILURE);
> > + }
> > +
> > + empty_capsule = (capsule == CAPSULE_ACCEPT ||
> > + capsule == CAPSULE_REVERT);
> > +
>
> So empty_capsule is redundant as empty_capsule is equivalent with
> "capsule == CAPSULE_NORMAL_BLOB".
> I think that a single variable, say capsule_type, is enough.
I was using empty_capsule primarily to make the check done below look
more succinct and readable. But I can change that to capsule !=
CAPSULE_NORMAL_BLOB.
>
> > /* check necessary parameters */
> > - if ((argc != optind + 2) || !guid ||
> > - ((privkey_file && !cert_file) ||
> > - (!privkey_file && cert_file))) {
> > + if ((!empty_capsule &&
> > + ((argc != optind + 2) || !guid ||
> > + ((privkey_file && !cert_file) ||
> > + (!privkey_file && cert_file)))) ||
> > + (empty_capsule &&
> > + ((argc != optind + 1) ||
> > + ((capsule == CAPSULE_ACCEPT) && !guid) ||
> > + ((capsule == CAPSULE_REVERT) && guid)))) {
> > print_usage();
> > exit(EXIT_FAILURE);
> > }
> >
> > - if (create_fwbin(argv[argc - 1], argv[argc - 2], guid, index, instance,
> > - mcount, privkey_file, cert_file) < 0) {
> > + if (empty_capsule) {
> > + if (create_empty_capsule(argv[argc - 1], guid,
> > + capsule == CAPSULE_ACCEPT) < 0) {
>
> if (capsule_type != CAPSULE_NORMAL_BLOB)
> create_empty_capsule(..., capsule_type == CAPSULE_ACCEPT);
>
> Simple is the best :)
Common, please don't tell me that the code above is complicated. Just
that we can do without the empty_capsule variable, yes.
-sughosh
>
> -Takahiro Akashi
> > + fprintf(stderr, "Creating empty capsule failed\n");
> > + exit(EXIT_FAILURE);
> > + }
> > + } else if (create_fwbin(argv[argc - 1], argv[argc - 2], guid,
> > + index, instance, mcount, privkey_file,
> > + cert_file) < 0) {
> > fprintf(stderr, "Creating firmware capsule failed\n");
> > exit(EXIT_FAILURE);
> > }
> > --
> > 2.25.1
> >
More information about the U-Boot
mailing list