[PATCH 1/3] ARM: renesas: condor: switch eMMC bus to 1V8

[Marek Vasut]

From: Hai Pham <hai.pham.ud at renesas.com>

The eMMC card has two supplies, VCC and VCCQ. The VCC supplies the NAND
array and the VCCQ supplies the bus. On Condor, the VCC is connected to
3.3V rail, while the VCCQ is connected to 1.8V rail. Adjust the pinmux
to match the bus, which is always operating in 1.8V mode.

Based on Linux commit 69efe4bbeda50745 ("arm64: dts: renesas: condor:
Switch eMMC bus to 1V8") from Wolfram Sang

Signed-off-by: Hai Pham <hai.pham.ud at renesas.com>
---
 arch/arm/dts/r8a77980-condor.dts | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/arch/arm/dts/r8a77980-condor.dts b/arch/arm/dts/r8a77980-condor.dts
index 3dde028e22..f0a0a51d73 100644
--- a/arch/arm/dts/r8a77980-condor.dts
+++ b/arch/arm/dts/r8a77980-condor.dts
@@ -212,7 +212,7 @@
 
 &mmc0 {
 	pinctrl-0 = <&mmc_pins>;
-	pinctrl-1 = <&mmc_pins_uhs>;
+	pinctrl-1 = <&mmc_pins>;
 	pinctrl-names = "default", "state_uhs";
 
 	vmmc-supply = <&d3_3v>;
@@ -253,12 +253,6 @@
 	};
 
 	mmc_pins: mmc {
-		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
-		function = "mmc";
-		power-source = <3300>;
-	};
-
-	mmc_pins_uhs: mmc_uhs {
 		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
 		function = "mmc";
 		power-source = <1800>;
-- 
2.35.1