[PATCH v2] board: freescale: p1_p2_rdb_pc: Fix parsing inverted bits from boot input data

Peng Fan (OSS) peng.fan at oss.nxp.com
Thu Jun 16 11:00:25 CEST 2022



在 2022/4/25 22:12, Pali Rohár 写道:
> On some boards upper 4 bits of i2c boot input data (register 0) are
> inverted. Information which bits are inverted is stored in register 2.
>
> So invert read input data back according to register 2 prior processing
> them. This fixes printing "rom_loc: value" line during booting.
>
> Signed-off-by: Pali Rohár <pali at kernel.org>

Not able to apply this with next branch. Please rebase.

Thanks,
Peng.

> ---
> Changes in v2:
> * Use register 2 for detecting which bits needs to be inverted
> ---
>   board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 6 ++++--
>   1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
> index 29502a5c05c2..cdbff03ac45c 100644
> --- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
> +++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
> @@ -164,7 +164,7 @@ int checkboard(void)
>   {
>   	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
>   	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
> -	u8 in, out, io_config, val;
> +	u8 in, out, invert, io_config, val;
>   	int bus_num = CONFIG_SYS_SPD_BUS_NUM;
>   
>   	printf("Board: %s CPLD: V%d.%d PCBA: V%d.0\n", CONFIG_BOARDNAME,
> @@ -187,6 +187,7 @@ int checkboard(void)
>   
>   	if (dm_i2c_read(dev, 0, &in, 1) < 0 ||
>   	    dm_i2c_read(dev, 1, &out, 1) < 0 ||
> +	    dm_i2c_read(dev, 2, &invert, 1) < 0 ||
>   	    dm_i2c_read(dev, 3, &io_config, 1) < 0) {
>   		printf("Error reading i2c boot information!\n");
>   		return 0; /* Don't want to hang() on this error */
> @@ -196,13 +197,14 @@ int checkboard(void)
>   
>   	if (i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 0, 1, &in, 1) < 0 ||
>   	    i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 1, 1, &out, 1) < 0 ||
> +	    i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 2, 1, &invert, 1) < 0 ||
>   	    i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 3, 1, &io_config, 1) < 0) {
>   		printf("Error reading i2c boot information!\n");
>   		return 0; /* Don't want to hang() on this error */
>   	}
>   	#endif
>   
> -	val = (in & io_config) | (out & (~io_config));
> +	val = ((in ^ invert) & io_config) | (out & (~io_config));
>   
>   	puts("rom_loc: ");
>   	if ((val & (~__SW_BOOT_MASK)) == __SW_BOOT_SD) {



More information about the U-Boot mailing list