[PATCH 15/16] configs: add stm32mp13 defconfig
Patrick DELAUNAY
patrick.delaunay at foss.st.com
Fri Jun 17 11:04:23 CEST 2022
Hi
some adaptation for Kconfig migration in next branch
On 5/6/22 16:06, Patrick Delaunay wrote:
> Add a initial config for STM32M13x SOC family, using the stm32mp135f-dk
> device tree.
>
> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
>
> board/st/stm32mp1/MAINTAINERS | 1 +
> configs/stm32mp13_defconfig | 54 +++++++++++++++++++++++++++++++++++
> 2 files changed, 55 insertions(+)
> create mode 100644 configs/stm32mp13_defconfig
>
> diff --git a/board/st/stm32mp1/MAINTAINERS b/board/st/stm32mp1/MAINTAINERS
> index c9252e90f4..d5a09cdc39 100644
> --- a/board/st/stm32mp1/MAINTAINERS
> +++ b/board/st/stm32mp1/MAINTAINERS
> @@ -6,6 +6,7 @@ S: Maintained
> F: arch/arm/dts/stm32mp13*
> F: arch/arm/dts/stm32mp15*
> F: board/st/stm32mp1/
> +F: configs/stm32mp13_defconfig
> F: configs/stm32mp15_defconfig
> F: configs/stm32mp15_basic_defconfig
> F: configs/stm32mp15_trusted_defconfig
> diff --git a/configs/stm32mp13_defconfig b/configs/stm32mp13_defconfig
> new file mode 100644
> index 0000000000..877c020b4a
> --- /dev/null
> +++ b/configs/stm32mp13_defconfig
> @@ -0,0 +1,54 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_STM32MP=y
> +CONFIG_TFABOOT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x180000
> +CONFIG_ENV_OFFSET=0x900000
> +CONFIG_DEFAULT_DEVICE_TREE="stm32mp135f-dk"
> +CONFIG_STM32MP13x=y
> +CONFIG_DDR_CACHEABLE_SIZE=0x10000000
> +CONFIG_TARGET_ST_STM32MP13x=y
> +CONFIG_ENV_OFFSET_REDUND=0x940000
> +# CONFIG_ARMV7_NONSEC is not set
> +CONFIG_SYS_LOAD_ADDR=0xc2000000
> +CONFIG_SYS_MEMTEST_START=0xc0000000
> +CONFIG_SYS_MEMTEST_END=0xc4000000
> +CONFIG_DISTRO_DEFAULTS=y
> +CONFIG_FIT=y
> +CONFIG_BOOTDELAY=1
> +CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
> +CONFIG_SYS_PROMPT="STM32MP> "
> +CONFIG_CMD_ADTIMG=y
> +CONFIG_CMD_ERASEENV=y
> +CONFIG_CMD_MEMINFO=y
> +CONFIG_CMD_MEMTEST=y
> +CONFIG_CMD_CLK=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_CACHE=y
> +CONFIG_CMD_TIME=y
> +CONFIG_CMD_TIMER=y
> +CONFIG_CMD_LOG=y
> +CONFIG_OF_LIVE=y
> +CONFIG_ENV_IS_NOWHERE=y
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_SYS_MMC_ENV_DEV=-1
> +CONFIG_CLK_SCMI=y
> +CONFIG_STM32_SDMMC2=y
> +CONFIG_DM_ETH=y
> +CONFIG_PINCONF=y
> +CONFIG_DM_REGULATOR=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_DM_REGULATOR_GPIO=y
> +CONFIG_DM_REGULATOR_SCMI=y
> +CONFIG_RESET_SCMI=y
> +CONFIG_SERIAL_RX_BUFFER=y
> +CONFIG_SYSRESET_PSCI=y
> +CONFIG_TEE=y
> +CONFIG_OPTEE=y
> +# CONFIG_OPTEE_TA_AVB is not set
> +CONFIG_ERRNO_STR=y
> +# CONFIG_LMB_USE_MAX_REGIONS is not set
> +CONFIG_LMB_MEMORY_REGIONS=2
> +CONFIG_LMB_RESERVED_REGIONS=16
with
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0400000
Applied to u-boot-stm/next, thanks!
Regards
Patrick
More information about the U-Boot
mailing list