[PATCH 1/4] arch/Kconfig.nxp: Re-organize slightly
Tom Rini
trini at konsulko.com
Fri Jun 17 22:24:31 CEST 2022
Make all of the CHAIN_OF_TRUST options be under a single menu and add a
comment for the rest, so the resulting config file reads more clearly.
Remove duplicate CHAIN_OF_TRUST options from
board/congatec/common/Kconfig. Remove duplicate NXP_ESBC config
questions and move to arch/Kconfig.nxp.
Signed-off-by: Tom Rini <trini at konsulko.com>
---
arch/Kconfig.nxp | 30 +++++++++++------
arch/arm/cpu/armv7/ls102xa/Kconfig | 6 ----
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 15 +++------
arch/powerpc/cpu/mpc85xx/Kconfig | 6 ----
board/congatec/common/Kconfig | 41 -----------------------
5 files changed, 24 insertions(+), 74 deletions(-)
diff --git a/arch/Kconfig.nxp b/arch/Kconfig.nxp
index 1e26f1dc5372..f72c513aa6a8 100644
--- a/arch/Kconfig.nxp
+++ b/arch/Kconfig.nxp
@@ -1,7 +1,13 @@
-config CHAIN_OF_TRUST
+config NXP_ESBC
+ bool "NXP ESBC (secure boot) functionality"
+ help
+ Enable Freescale Secure Boot feature. Normally selected by defconfig.
+ If unsure, do not change.
+
+menu "Chain of trust / secure boot options"
depends on !FIT_SIGNATURE && NXP_ESBC
- imply CMD_BLOB
- imply CMD_HASH if ARM
+
+config CHAIN_OF_TRUST
select FSL_CAAM
select FSL_SEC_MON
select SPL_BOARD_INIT if (ARM && SPL)
@@ -11,12 +17,12 @@ config CHAIN_OF_TRUST
select ENV_IS_NOWHERE
select CMD_EXT4 if ARM
select CMD_EXT4_WRITE if ARM
- bool
- default y
+ imply CMD_BLOB
+ imply CMD_HASH if ARM
+ def_bool y
config CMD_ESBC_VALIDATE
bool "Enable the 'esbc_validate' and 'esbc_halt' commands"
- depends on CHAIN_OF_TRUST
default y
help
This option enables two commands used for secure booting:
@@ -35,15 +41,14 @@ config ESBC_ADDR_64BIT
config SYS_FSL_SFP_BE
def_bool y
- depends on CHAIN_OF_TRUST && (PPC || FSL_LSCH2 || ARCH_LS1021A)
+ depends on PPC || FSL_LSCH2 || ARCH_LS1021A
config SYS_FSL_SFP_LE
def_bool y
- depends on CHAIN_OF_TRUST && !SYS_FSL_SFP_BE
+ depends on !SYS_FSL_SFP_BE
choice
prompt "SFP IP revision"
- depends on CHAIN_OF_TRUST
default SYS_FSL_SFP_VER_3_0 if PPC
default SYS_FSL_SFP_VER_3_4
@@ -60,11 +65,14 @@ endchoice
config SYS_FSL_SRK_LE
def_bool y
- depends on CHAIN_OF_TRUST && ARM
+ depends on ARM
config KEY_REVOCATION
def_bool y
- depends on CHAIN_OF_TRUST
+
+endmenu
+
+comment "Other functionality shared between NXP SoCs"
config DEEP_SLEEP
bool "Enable SoC deep sleep feature"
diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig
index c496e6439199..a901360fa7d8 100644
--- a/arch/arm/cpu/armv7/ls102xa/Kconfig
+++ b/arch/arm/cpu/armv7/ls102xa/Kconfig
@@ -41,12 +41,6 @@ config MAX_CPUS
cores, count the reserved ports. This will allocate enough memory
in spin table to properly handle all cores.
-config NXP_ESBC
- bool "NXP_ESBC"
- help
- Enable Freescale Secure Boot feature. Normally selected
- by defconfig. If unsure, do not change.
-
config SYS_CCI400_OFFSET
hex "Offset for CCI400 base"
depends on SYS_FSL_HAS_CCI400
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 7f08733a35b6..602b624dca52 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -26,7 +26,7 @@ config ARCH_LS1012A
config ARCH_LS1028A
bool
select ARMV8_SET_SMPEN
- select ESBC_HDR_LS
+ select ESBC_HDR_LS if CHAIN_OF_TRUST
select FSL_LAYERSCAPE
select FSL_LSCH3
select GICV3
@@ -139,7 +139,7 @@ config ARCH_LS1088A
bool
select ARMV8_SET_SMPEN
select ARM_ERRATA_855873 if !TFABOOT
- select ESBC_HDR_LS
+ select ESBC_HDR_LS if CHAIN_OF_TRUST
select FSL_IFC
select FSL_LAYERSCAPE
select FSL_LSCH3
@@ -189,7 +189,7 @@ config ARCH_LS2080A
select ARM_ERRATA_828024
select ARM_ERRATA_829520
select ARM_ERRATA_833471
- select ESBC_HDR_LS
+ select ESBC_HDR_LS if CHAIN_OF_TRUST
select FSL_IFC
select FSL_LAYERSCAPE
select FSL_LSCH3
@@ -242,7 +242,7 @@ config ARCH_LS2080A
config ARCH_LX2162A
bool
select ARMV8_SET_SMPEN
- select ESBC_HDR_LS
+ select ESBC_HDR_LS if CHAIN_OF_TRUST
select FSL_DDR_BIST
select FSL_DDR_INTERACTIVE
select FSL_LAYERSCAPE
@@ -281,7 +281,7 @@ config ARCH_LX2162A
config ARCH_LX2160A
bool
select ARMV8_SET_SMPEN
- select ESBC_HDR_LS
+ select ESBC_HDR_LS if CHAIN_OF_TRUST
select FSL_DDR_BIST
select FSL_DDR_INTERACTIVE
select FSL_LAYERSCAPE
@@ -461,11 +461,6 @@ config EMC2305
Enable the EMC2305 fan controller for configuration of fan
speed.
-config NXP_ESBC
- bool "NXP_ESBC"
- help
- Enable Freescale Secure Boot feature
-
config QSPI_AHB_INIT
bool "Init the QSPI AHB bus"
help
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 0ef5e730bdc2..e7003d3b647e 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -827,12 +827,6 @@ config FSL_LAW
config HETROGENOUS_CLUSTERS
bool
-config NXP_ESBC
- bool "NXP_ESBC"
- help
- Enable Freescale Secure Boot feature. Normally selected
- by defconfig. If unsure, do not change.
-
config MAX_CPUS
int "Maximum number of CPUs permitted for MPC85xx"
default 12 if ARCH_T4240
diff --git a/board/congatec/common/Kconfig b/board/congatec/common/Kconfig
index d4a238de99bc..a1f2139219b1 100644
--- a/board/congatec/common/Kconfig
+++ b/board/congatec/common/Kconfig
@@ -1,44 +1,3 @@
-if !ARCH_IMX8M && !ARCH_IMX8
-
-config CHAIN_OF_TRUST
- depends on !FIT_SIGNATURE && SECURE_BOOT
- imply CMD_BLOB
- imply CMD_HASH if ARM
- select FSL_CAAM
- select SPL_BOARD_INIT if (ARM && SPL)
- select SHA_HW_ACCEL
- select SHA_PROG_HW_ACCEL
- select ENV_IS_NOWHERE
- select CMD_EXT4 if ARM
- select CMD_EXT4_WRITE if ARM
- bool
- default y
-
-config CMD_ESBC_VALIDATE
- bool "Enable the 'esbc_validate' and 'esbc_halt' commands"
- default y if CHAIN_OF_TRUST
- help
- This option enables two commands used for secure booting:
-
- esbc_validate - validate signature using RSA verification
- esbc_halt - put the core in spin loop (Secure Boot Only)
-
-endif
-
-config VOL_MONITOR_LTC3882_READ
- depends on VID
- bool "Enable the LTC3882 voltage monitor read"
- help
- This option enables LTC3882 voltage monitor read
- functionality. It is used by common VID driver.
-
-config VOL_MONITOR_LTC3882_SET
- depends on VID
- bool "Enable the LTC3882 voltage monitor set"
- help
- This option enables LTC3882 voltage monitor set
- functionality. It is used by common VID driver.
-
config USB_TCPC
bool "USB Typec port controller simple driver"
help
--
2.25.1
More information about the U-Boot
mailing list