[PATCH 17/17] Convert CONFIG_KIRKWOOD_PCIE_INIT et al to Kconfig

[Tom Rini]

This converts the following to Kconfig:
   CONFIG_KIRKWOOD_EGIGA_INIT
   CONFIG_KIRKWOOD_PCIE_INIT
   CONFIG_KIRKWOOD_RGMII_PAD_1V8
   CONFIG_KM_DISABLE_PCIE

Signed-off-by: Tom Rini <trini at konsulko.com>
---
 arch/arm/mach-kirkwood/Kconfig               | 12 ++++++++++++
 arch/arm/mach-kirkwood/include/mach/config.h |  3 ---
 configs/km_kirkwood_128m16_defconfig         |  1 +
 configs/km_kirkwood_defconfig                |  1 +
 configs/kmcoge5un_defconfig                  |  1 +
 include/configs/SBx81LIFKW.h                 |  4 ----
 include/configs/SBx81LIFXCAT.h               |  4 ----
 include/configs/km_kirkwood.h                |  7 -------
 8 files changed, 15 insertions(+), 18 deletions(-)

diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index ca2da003b65b..98bb10c2dee3 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -121,6 +121,18 @@ endchoice
 config SYS_SOC
 	default "kirkwood"
 
+config KIRKWOOD_RGMII_PAD_1V8
+	bool "Configures the I/O voltage of the pads connected gigabit interface to 1.8V"
+	default y
+
+config KIRKWOOD_EGIGA_INIT
+	bool "Enable GbePort0/1 for kernel"
+	default y
+
+config KIRKWOOD_PCIE_INIT
+	bool "Enable PCIe Port0 for kernel"
+	default y
+
 source "board/Marvell/openrd/Kconfig"
 source "board/Marvell/dreamplug/Kconfig"
 source "board/Synology/ds109/Kconfig"
diff --git a/arch/arm/mach-kirkwood/include/mach/config.h b/arch/arm/mach-kirkwood/include/mach/config.h
index ca341570544b..90e86ab99b41 100644
--- a/arch/arm/mach-kirkwood/include/mach/config.h
+++ b/arch/arm/mach-kirkwood/include/mach/config.h
@@ -23,9 +23,6 @@
 #endif /* CONFIG_KW88F6281 */
 
 #include <asm/arch/soc.h>
-#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
-#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
-#define CONFIG_KIRKWOOD_PCIE_INIT       /* Enable PCIE Port0 for kernel */
 
 #define CONFIG_I2C_MVTWSI_BASE0	KW_TWSI_BASE
 #define MV_UART_CONSOLE_BASE	KW_UART0_BASE
diff --git a/configs/km_kirkwood_128m16_defconfig b/configs/km_kirkwood_128m16_defconfig
index 1d8ae5876b90..655759b09ce7 100644
--- a/configs/km_kirkwood_128m16_defconfig
+++ b/configs/km_kirkwood_128m16_defconfig
@@ -7,6 +7,7 @@ CONFIG_SYS_KWD_CONFIG="board/keymile/km_arm/kwbimage_128M16_1.cfg"
 CONFIG_SYS_TEXT_BASE=0x07d00000
 CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_TARGET_KM_KIRKWOOD=y
+# CONFIG_KIRKWOOD_PCIE_INIT is not set
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x0
 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-km_kirkwood"
diff --git a/configs/km_kirkwood_defconfig b/configs/km_kirkwood_defconfig
index d2f2ff4e23e7..65378d3cec16 100644
--- a/configs/km_kirkwood_defconfig
+++ b/configs/km_kirkwood_defconfig
@@ -7,6 +7,7 @@ CONFIG_SYS_KWD_CONFIG="board/keymile/km_arm/kwbimage.cfg"
 CONFIG_SYS_TEXT_BASE=0x07d00000
 CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_TARGET_KM_KIRKWOOD=y
+# CONFIG_KIRKWOOD_PCIE_INIT is not set
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x0
 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-km_kirkwood"
diff --git a/configs/kmcoge5un_defconfig b/configs/kmcoge5un_defconfig
index 9654b8d8060c..8b54f9c7c842 100644
--- a/configs/kmcoge5un_defconfig
+++ b/configs/kmcoge5un_defconfig
@@ -7,6 +7,7 @@ CONFIG_SYS_KWD_CONFIG="board/keymile/km_arm/kwbimage_256M8_1.cfg"
 CONFIG_SYS_TEXT_BASE=0x07d00000
 CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_TARGET_KM_KIRKWOOD=y
+# CONFIG_KIRKWOOD_PCIE_INIT is not set
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xC0000
 CONFIG_ENV_SECT_SIZE=0x10000
diff --git a/include/configs/SBx81LIFKW.h b/include/configs/SBx81LIFKW.h
index 8114373655f3..e42e6d56532f 100644
--- a/include/configs/SBx81LIFKW.h
+++ b/include/configs/SBx81LIFKW.h
@@ -9,10 +9,6 @@
 /* additions for new ARM relocation support */
 #define CONFIG_SYS_SDRAM_BASE	0x00000000
 
-#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
-#define CONFIG_KIRKWOOD_PCIE_INIT	/* Enable PCIE Port0 */
-#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
-
 /*
  * NS16550 Configuration
  */
diff --git a/include/configs/SBx81LIFXCAT.h b/include/configs/SBx81LIFXCAT.h
index b70829c09d58..8926c26b0bdf 100644
--- a/include/configs/SBx81LIFXCAT.h
+++ b/include/configs/SBx81LIFXCAT.h
@@ -9,10 +9,6 @@
 /* additions for new ARM relocation support */
 #define CONFIG_SYS_SDRAM_BASE	0x00000000
 
-#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
-#define CONFIG_KIRKWOOD_PCIE_INIT	/* Enable PCIE Port0 */
-#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
-
 /*
  * NS16550 Configuration
  */
diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h
index e58a69501b33..01482d531996 100644
--- a/include/configs/km_kirkwood.h
+++ b/include/configs/km_kirkwood.h
@@ -23,7 +23,6 @@
 /* KM_KIRKWOOD */
 #if defined(CONFIG_KM_KIRKWOOD)
 #define CONFIG_HOSTNAME			"km_kirkwood"
-#define CONFIG_KM_DISABLE_PCIE
 
 /* KM_KIRKWOOD_PCI */
 #elif defined(CONFIG_KM_KIRKWOOD_PCI)
@@ -34,7 +33,6 @@
 /* KM_KIRKWOOD_128M16 */
 #elif defined(CONFIG_KM_KIRKWOOD_128M16)
 #define CONFIG_HOSTNAME			"km_kirkwood_128m16"
-#define CONFIG_KM_DISABLE_PCIE
 
 /* KM_NUSA */
 #elif defined(CONFIG_KM_NUSA)
@@ -44,7 +42,6 @@
 /* KMCOGE5UN */
 #elif defined(CONFIG_KM_COGE5UN)
 #define CONFIG_HOSTNAME			"kmcoge5un"
-#define CONFIG_KM_DISABLE_PCIE
 
 /* KM_SUSE2 */
 #elif defined(CONFIG_KM_SUSE2)
@@ -118,8 +115,4 @@
 	MVGBE_SET_MII_SPEED_TO_100)
 #endif
 
-#ifdef CONFIG_KM_DISABLE_PCIE
-#undef  CONFIG_KIRKWOOD_PCIE_INIT
-#endif
-
 #endif /* _CONFIG_KM_KIRKWOOD */
-- 
2.25.1