[PATCH 03/10] ARM: dts: ast2600: Dsiable I2C nodes by default

[Ryan Chen]

> -----Original Message-----
> From: joel.stan at gmail.com <joel.stan at gmail.com> On Behalf Of Joel Stanley
> Sent: Monday, June 20, 2022 3:25 PM
> To: Ryan Chen <ryan_chen at aspeedtech.com>; BMC-SW
> <BMC-SW at aspeedtech.com>; Heiko Schocher <hs at denx.de>
> Cc: u-boot at lists.denx.de; Cédric Le Goater <clg at kaod.org>
> Subject: [PATCH 03/10] ARM: dts: ast2600: Dsiable I2C nodes by default
> 
> Allow boards to enable the buses they use.
> 
> Signed-off-by: Joel Stanley <joel at jms.id.au>
Reviewed-by: Ryan Chen <ryan_chen at aspeedtech.com>
> ---
>  arch/arm/dts/ast2600.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm/dts/ast2600.dtsi b/arch/arm/dts/ast2600.dtsi index
> 4b23d25ede0a..a37d062bcad7 100644
> --- a/arch/arm/dts/ast2600.dtsi
> +++ b/arch/arm/dts/ast2600.dtsi
> @@ -868,6 +868,7 @@
>  		clocks = <&scu ASPEED_CLK_APB2>;
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&pinctrl_i2c3_default>;
> +		status = "disabled";
>  	};
> 
>  	i2c3: i2c at 200 {
> @@ -883,6 +884,7 @@
>  		clocks = <&scu ASPEED_CLK_APB2>;
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&pinctrl_i2c4_default>;
> +		status = "disabled";
>  	};
> 
>  	i2c4: i2c at 280 {
> @@ -898,6 +900,7 @@
>  		clocks = <&scu ASPEED_CLK_APB2>;
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&pinctrl_i2c5_default>;
> +		status = "disabled";
>  	};
> 
>  	i2c5: i2c at 300 {
> @@ -913,6 +916,7 @@
>  		clocks = <&scu ASPEED_CLK_APB2>;
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&pinctrl_i2c6_default>;
> +		status = "disabled";
>  	};
> 
>  	i2c6: i2c at 380 {
> @@ -928,6 +932,7 @@
>  		clocks = <&scu ASPEED_CLK_APB2>;
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&pinctrl_i2c7_default>;
> +		status = "disabled";
>  	};
> 
>  	i2c7: i2c at 400 {
> @@ -943,6 +948,7 @@
>  		clocks = <&scu ASPEED_CLK_APB2>;
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&pinctrl_i2c8_default>;
> +		status = "disabled";
>  	};
> 
>  	i2c8: i2c at 480 {
> @@ -958,6 +964,7 @@
>  		clocks = <&scu ASPEED_CLK_APB2>;
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&pinctrl_i2c9_default>;
> +		status = "disabled";
>  	};
> 
>  	i2c9: i2c at 500 {
> --
> 2.35.1