[PATCH v5 07/23] FWU: STM32MP1: Add support to read boot index from backup register
Patrick DELAUNAY
patrick.delaunay at foss.st.com
Tue Jun 21 13:27:15 CEST 2022
Hi,
On 6/9/22 14:29, Sughosh Ganu wrote:
> The FWU Multi Bank Update feature allows the platform to boot the
> firmware images from one of the partitions(banks). The first stage
> bootloader(fsbl) passes the value of the boot index, i.e. the bank
> from which the firmware images were booted from to U-Boot. On the
> STM32MP157C-DK2 board, this value is passed through one of the SoC's
> backup register. Add a function to read the boot index value from the
> backup register.
>
> Signed-off-by: Sughosh Ganu <sughosh.ganu at linaro.org>
> ---
> arch/arm/mach-stm32mp/include/mach/stm32.h | 4 ++++
> board/st/stm32mp1/stm32mp1.c | 7 +++++++
> include/fwu.h | 2 +-
> 3 files changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h
> index 47e88fc3dc..40995ee142 100644
> --- a/arch/arm/mach-stm32mp/include/mach/stm32.h
> +++ b/arch/arm/mach-stm32mp/include/mach/stm32.h
> @@ -100,6 +100,7 @@ enum boot_device {
> #define TAMP_BACKUP_REGISTER(x) (STM32_TAMP_BASE + 0x100 + 4 * x)
> #define TAMP_BACKUP_MAGIC_NUMBER TAMP_BACKUP_REGISTER(4)
> #define TAMP_BACKUP_BRANCH_ADDRESS TAMP_BACKUP_REGISTER(5)
> +#define TAMP_FWU_BOOT_INFO_REG TAMP_BACKUP_REGISTER(10)
> #define TAMP_COPRO_RSC_TBL_ADDRESS TAMP_BACKUP_REGISTER(17)
> #define TAMP_COPRO_STATE TAMP_BACKUP_REGISTER(18)
> #define TAMP_BOOT_CONTEXT TAMP_BACKUP_REGISTER(20)
> @@ -118,6 +119,9 @@ enum boot_device {
> #define TAMP_BOOT_INSTANCE_MASK GENMASK(3, 0)
> #define TAMP_BOOT_FORCED_MASK GENMASK(7, 0)
> #define TAMP_BOOT_DEBUG_ON BIT(16)
> +#define TAMP_FWU_BOOT_IDX_MASK GENMASK(3, 0)
> +
> +#define TAMP_FWU_BOOT_IDX_OFFSET 0
>
please don't mix the 2 TAMP_FWU defines with define and enum for TAMP_BOOT
=> move the 2 defines before TAMP_COPRO defines.
#define TAMP_BACKUP_MAGIC_NUMBER TAMP_BACKUP_REGISTER(4)
#define TAMP_BACKUP_BRANCH_ADDRESS TAMP_BACKUP_REGISTER(5)
+ #define TAMP_FWU_BOOT_INFO_REG TAMP_BACKUP_REGISTER(10)
#define TAMP_COPRO_RSC_TBL_ADDRESS TAMP_BACKUP_REGISTER(17)
#define TAMP_COPRO_STATE TAMP_BACKUP_REGISTER(18)
#define TAMP_BOOT_CONTEXT TAMP_BACKUP_REGISTER(20)
#define TAMP_BOOTCOUNT TAMP_BACKUP_REGISTER(21)
+
+#define TAMP_FWU_BOOT_IDX_MASK GENMASK(3, 0)
+ #define TAMP_FWU_BOOT_IDX_OFFSET 0
#define TAMP_COPRO_STATE_OFF 0
#define TAMP_COPRO_STATE_INIT 1
> enum forced_boot_mode {
> BOOT_NORMAL = 0x00,
> diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
> index e68bf09955..dff41ed6f6 100644
> --- a/board/st/stm32mp1/stm32mp1.c
> +++ b/board/st/stm32mp1/stm32mp1.c
> @@ -1081,4 +1081,11 @@ int fwu_plat_get_update_index(u32 *update_idx)
> return ret;
> }
>
> +void fwu_plat_get_bootidx(void *boot_idx)
> +{
> + u32 *bootidx = boot_idx;
> +
> + *bootidx = (readl(TAMP_FWU_BOOT_INFO_REG) >>
> + TAMP_FWU_BOOT_IDX_OFFSET) & TAMP_FWU_BOOT_IDX_MASK;
> +}
> #endif /* CONFIG_FWU_MULTI_BANK_UPDATE */
> diff --git a/include/fwu.h b/include/fwu.h
> index 36e58afa29..41774ff9e2 100644
> --- a/include/fwu.h
> +++ b/include/fwu.h
> @@ -46,7 +46,7 @@ int fwu_revert_boot_index(void);
> int fwu_accept_image(efi_guid_t *img_type_id, u32 bank);
> int fwu_clear_accept_image(efi_guid_t *img_type_id, u32 bank);
>
> -
> +void fwu_plat_get_bootidx(void *boot_idx);
> int fwu_plat_get_alt_num(struct udevice *dev, efi_guid_t *image_guid,
> int *alt_num);
> int fwu_plat_get_update_index(u32 *update_idx);
With the modifications:
Reviewed-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
Thanks
Patrick
More information about the U-Boot
mailing list