[PATCH v5 12/23] FWU: doc: Add documentation for the FWU feature

Tue Jun 21 14:12:53 CEST 2022

Hi,

Two minor issues.

On 6/9/22 14:29, Sughosh Ganu wrote:
> Add documentattion for the FWU Multi Bank Update feature. The document

s/documentattio/documentation

> describes the steps needed for setting up the platform for the
> feature, as well as steps for enabling the feature on the platform.
>
> Signed-off-by: Sughosh Ganu <sughosh.ganu at linaro.org>
> ---
>   doc/develop/uefi/fwu_updates.rst | 142 +++++++++++++++++++++++++++++++
>   doc/develop/uefi/index.rst       |   1 +
>   doc/develop/uefi/uefi.rst        |   2 +
>   3 files changed, 145 insertions(+)
>   create mode 100644 doc/develop/uefi/fwu_updates.rst
>
> diff --git a/doc/develop/uefi/fwu_updates.rst b/doc/develop/uefi/fwu_updates.rst
> new file mode 100644
> index 0000000000..1c34beb7d5
> --- /dev/null
> +++ b/doc/develop/uefi/fwu_updates.rst
> @@ -0,0 +1,142 @@
> +.. SPDX-License-Identifier: GPL-2.0+
> +.. Copyright (c) 2022 Linaro Limited
> +
> +FWU Multi Bank Updates in U-Boot
> +================================
> +
> +The FWU Multi Bank Update feature implements the firmware update
> +mechanism described in the PSA Firmware Update for A-profile Arm
> +Architecture specification[1]. Certain aspects of the Dependable
> +Boot specification[2] are also implemented. The feature provides a
> +mechanism to have multiple banks of updatable firmware images and for
> +updating the firmware images on the non-booted bank. On a successful
> +update, the platform boots from the updated bank on subsequent
> +boot. The UEFI capsule-on-disk update feature is used for performing
> +the actual updates of the updatable firmware images.
> +
> +The bookkeeping of the updatable images is done through a structure
> +called metadata. Currently, the FWU metadata supports identification
> +of images based on image GUIDs stored on a GPT partitioned storage
> +media. There are plans to extend the metadata structure for non GPT
> +partitioned devices as well.
> +
> +Accessing the FWU metadata is done through generic API's which are
> +defined in a driver which complies with the u-boot's driver model. A
> +new uclass UCLASS_FWU_MDATA has been added for accessing the FWU
> +metadata. Individual drivers can be added based on the type of storage
> +media, and it's partitioning method. Details of the storage device
> +containing the FWU metadata partitions are specified through a U-Boot
> +specific device tree property `fwu-mdata-store`. Please refer to
> +U-Boot `doc <doc/device-tree-bindings/firmware/fwu-mdata.txt>`__ for
> +the device tree bindings.
> +
> +Enabling the FWU Multi Bank Update feature
> +------------------------------------------
> +
> +The feature can be enabled by specifying the following configs::
> +
> +    CONFIG_EFI_CAPSULE_ON_DISK=y
> +    CONFIG_EFI_CAPSULE_FIRMWARE_MANAGEMENT=y
> +    CONFIG_EFI_CAPSULE_FIRMWARE=y
> +    CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
> +
> +    CONFIG_FWU_MULTI_BANK_UPDATE=y
> +    CONFIG_CMD_FWU_METADATA=y
> +    CONFIG_DM_FWU_MDATA=y
> +    CONFIG_FWU_MDATA_GPT_BLK=y
> +    CONFIG_FWU_NUM_BANKS=<val>
> +    CONFIG_FWU_NUM_IMAGES_PER_BANK=<val>
> +
> +in the .config file
> +
> +The first group of configs enable the UEFI capsule-on-disk update
> +functionality. The second group of configs enable the FWU Multi Bank
> +Update functionality. Please refer to the section
> +:ref:`uefi_capsule_update_ref` for more details on generation of the
> +UEFI capsule.
> +
> +Setting up the device for GPT partitioned storage
> +-------------------------------------------------
> +
> +Before enabling the functionality in U-Boot, certain changes are
> +required to be done on the storage device. Assuming a GPT partitioned
> +storage device, the storage media needs to be partitioned with the
> +correct number of partitions, given the number of banks and number of
> +images per bank that the platform is going to support. Each updatable
> +firmware image will be stored on an separate partition. In addition,
> +the two copies of the FWU metadata will be stored on two separate
> +partitions.
> +
> +As an example, a platform supporting two banks with each bank
> +containing three images would need to have 2 * 3 = 6 parititions plus

s/parititions/partitions/

> +the two metadata partitions, or 8 partitions. In addition the storage
> +media can have additional partitions of non-updatable images, like the
> +EFI System Partition(ESP), a partition for the root file system etc.
> +
> +When generating the partitions, a few aspects need to be taken care
> +of. Each GPT partition entry in the GPT header has two GUIDs::
> +
> +    *PartitionTypeGUID*
> +    *UniquePartitionGUID*
> +
> +The PartitionTypeGUID value should correspond to the *image_type_uuid*
> +field of the FWU metadata. This field is used to identify a given type
> +of updatable firmware image, e.g. u-boot, op-tee, FIP etc. This GUID
> +should also be used for specifying the `--guid` parameter when
> +generating the capsule.
> +
> +The UniquePartitionGUID value should correspond to the *image_uuid*
> +field in the FWU metadata. This GUID is used to identify images of a
> +given image type in different banks.
> +
> +Similarly, the FWU specifications defines the GUID value to be used
> +for the metadata partitions. This would be the PartitionTypeGUID for
> +the metadata partitions.
> +
> +When generating the metadata, the *image_type_uuid* and the
> +*image_uuid* values should match the *PartitionTypeGUID* and the
> +*UniquePartitionGUID* values respectively.
> +
> +Performing the Update
> +---------------------
> +
> +Once the storage media has been partitioned and populated with the
> +metadata partitions, the UEFI capsule-on-disk update functionality can
> +be used for performing the update. Refer to the section
> +:ref:`uefi_capsule_update_ref` for details on how the update can be
> +invoked.
> +
> +On a successful update, the FWU metadata gets updated to reflect the
> +bank from which the platform would be booting on subsequent boot.
> +
> +Based on the value of bit15 of the Flags member of the capsule header,
> +the updated images would either be accepted by the u-boot's UEFI
> +implementation, or by the Operating System. If the Operating System is
> +accepting the firmware images, it does so by generating an empty
> +*accept* capsule. The Operating System can also reject the updated
> +firmware by generating a *revert* capsule. The empty capsule can be
> +applied by using the exact same procedure used for performing the
> +capsule-on-disk update.
> +
> +Generating an empty capsule
> +---------------------------
> +
> +The empty capsule can be generated using the mkeficapsule utility. To
> +build the tool, enable::
> +
> +    CONFIG_TOOLS_MKEFICAPSULE=y
> +
> +Run the following commands to generate the accept/revert capsules::
> +
> +.. code-block:: bash
> +
> +    $ ./tools/mkeficapsule \
> +      [--fw-accept --guid <image guid>] | \
> +      [--fw-revert] \
> +      <capsule_file_name>
> +
> +Links
> +-----
> +
> +* [1] https://developer.arm.com/documentation/den0118/a/ - FWU Specification
> +* [2] https://git.codelinaro.org/linaro/dependable-boot/mbfw/uploads/6f7ddfe3be24e18d4319e108a758d02e/mbfw.pdf - Dependable Boot Specification
> diff --git a/doc/develop/uefi/index.rst b/doc/develop/uefi/index.rst
> index 7e65dbc5d5..e26b1fbe05 100644
> --- a/doc/develop/uefi/index.rst
> +++ b/doc/develop/uefi/index.rst
> @@ -13,3 +13,4 @@ can be run an UEFI payload.
>      uefi.rst
>      u-boot_on_efi.rst
>      iscsi.rst
> +   fwu_updates.rst
> diff --git a/doc/develop/uefi/uefi.rst b/doc/develop/uefi/uefi.rst
> index 941e427093..536b278dd9 100644
> --- a/doc/develop/uefi/uefi.rst
> +++ b/doc/develop/uefi/uefi.rst
> @@ -277,6 +277,8 @@ Enable ``CONFIG_OPTEE``, ``CONFIG_CMD_OPTEE_RPMB`` and ``CONFIG_EFI_MM_COMM_TEE`
>   
>   [1] https://optee.readthedocs.io/en/latest/building/efi_vars/stmm.html
>   
> +.. _uefi_capsule_update_ref:
> +
>   Enabling UEFI Capsule Update feature
>   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>   

Regards

Patrick