[PATCH RESEND 0/9] mmc: Fixes for Aspeed boards

[Joel Stanley]

These changes get the SDHCI hardware on the AST2600 and AST2500 working
using the same device tree layout as upstream Linux.

The series has been tested on the Qemu models of the ast2500-evb and
ast2600-evb, and tested on the ast2600a3-evb hardware.

(this is a resend as I had a stray comma in the To list that broke
sending the first attempt)

Joel Stanley (9):
  ARM: dts: ast2600: Update SDHCI nodes
  ARM: dts: ast2500: Update SDHCI nodes
  clk/aspeed: Add debug message when clock fails
  clk/ast2600: Adjust eMMC clock names
  clk/ast2500: Add SD clock
  mmc/aspeed: Add debuging for clock probe failures
  mmc/aspeed: Probe from controller
  mmc/aspeed: Enable controller clocks
  config/ast2600: Enable eMMC related boot options

 drivers/clk/aspeed/clk_ast2500.c | 26 +++++++++++++++
 drivers/clk/aspeed/clk_ast2600.c |  8 ++---
 drivers/mmc/aspeed_sdhci.c       | 45 +++++++++++++++++++++++--
 arch/arm/dts/ast2500-evb.dts     |  4 +++
 arch/arm/dts/ast2500-u-boot.dtsi | 25 --------------
 arch/arm/dts/ast2500.dtsi        | 28 ++++++++++++++++
 arch/arm/dts/ast2600-evb.dts     | 24 ++++++--------
 arch/arm/dts/ast2600.dtsi        | 57 ++++++++++++++------------------
 configs/evb-ast2600_defconfig    | 13 ++++++++
 drivers/mmc/Kconfig              |  1 +
 10 files changed, 154 insertions(+), 77 deletions(-)

-- 
2.35.1