[PATCH 04/20] layerscape: Remove some unused CONFIG symbols
Tom Rini
trini at konsulko.com
Sat Jun 25 17:02:34 CEST 2022
All of these symbols are not referenced anywhere else in the code, so
remove them.
Cc: Peng Fan <peng.fan at nxp.com>
Signed-off-by: Tom Rini <trini at konsulko.com>
---
arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h | 4 ----
arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h | 1 -
arch/arm/include/asm/arch-ls102xa/config.h | 6 +-----
include/configs/MPC837XERDB.h | 1 -
include/configs/ids8313.h | 1 -
include/configs/mx6ullevk.h | 6 ------
6 files changed, 1 insertion(+), 18 deletions(-)
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
index 4b0f554e3363..f2dbcdc8164f 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
@@ -13,10 +13,8 @@
#define CONFIG_SYS_DCSRBAR 0x20000000
#define CONFIG_SYS_DCSR_DCFG_ADDR (CONFIG_SYS_DCSRBAR + 0x00140000)
-#define CONFIG_SYS_DCSR_COP_CCP_ADDR (CONFIG_SYS_DCSRBAR + 0x02008040)
#define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000)
-#define CONFIG_SYS_GIC400_ADDR (CONFIG_SYS_IMMR + 0x00400000)
#define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x00530000)
#define SYS_FSL_QSPI_ADDR (CONFIG_SYS_IMMR + 0x00550000)
#define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x00560000)
@@ -26,9 +24,7 @@
#define CONFIG_SYS_FSL_SCFG_ADDR (CONFIG_SYS_IMMR + 0x00570000)
#define CONFIG_SYS_FSL_BMAN_ADDR (CONFIG_SYS_IMMR + 0x00890000)
#define CONFIG_SYS_FSL_QMAN_ADDR (CONFIG_SYS_IMMR + 0x00880000)
-#define CONFIG_SYS_FSL_FMAN_ADDR (CONFIG_SYS_IMMR + 0x00a00000)
#define CONFIG_SYS_FSL_SERDES_ADDR (CONFIG_SYS_IMMR + 0x00ea0000)
-#define CONFIG_SYS_FSL_DCFG_ADDR (CONFIG_SYS_IMMR + 0x00ee0000)
#define CONFIG_SYS_FSL_CLK_ADDR (CONFIG_SYS_IMMR + 0x00ee1000)
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011c0500)
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011c0600)
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 304cd7980a66..570397b3c04c 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -52,7 +52,6 @@
#define CONFIG_SYS_FSL_DCSR_DDR_ADDR 0x70012c000ULL
#define CONFIG_SYS_FSL_DCSR_DDR2_ADDR 0x70012d000ULL
#define CONFIG_SYS_FSL_DCSR_DDR3_ADDR 0x700132000ULL
-#define CONFIG_SYS_FSL_DCSR_DDR4_ADDR 0x700133000ULL
#define I2C1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01000000)
#define I2C2_BASE_ADDR (CONFIG_SYS_IMMR + 0x01010000)
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
index 796e2b218e56..e5f61ea4a6ee 100644
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -32,14 +32,11 @@
#define CONFIG_SYS_FSL_RCPM_ADDR (CONFIG_SYS_IMMR + 0x00ee2000)
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011c0500)
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011d0500)
-#define CONFIG_SYS_DCU_ADDR (CONFIG_SYS_IMMR + 0x01ce0000)
#define CONFIG_SYS_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x02100000)
#define CONFIG_SYS_FSL_SEC_OFFSET 0x00700000
#define CONFIG_SYS_FSL_JR0_OFFSET 0x00710000
#define CONFIG_SYS_TSEC1_OFFSET 0x01d10000
-#define CONFIG_SYS_TSEC2_OFFSET 0x01d50000
-#define CONFIG_SYS_TSEC3_OFFSET 0x01d90000
#define CONFIG_SYS_MDIO1_OFFSET 0x01d24000
#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
@@ -79,8 +76,7 @@
#define AHCI_BASE_ADDR (CONFIG_SYS_IMMR + 0x02200000)
#ifdef CONFIG_DDR_SPD
#define CONFIG_VERY_BIG_RAM
-#define CONFIG_SYS_LS1_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
-#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_LS1_DDR_BLOCK1_SIZE
+#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30)
#endif
#define CONFIG_SYS_FSL_IFC_BE
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 3e4d66874df4..8517b0330f52 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -227,7 +227,6 @@
#ifdef CONFIG_TSEC2
#define CONFIG_TSEC2_NAME "TSEC1"
-#define CONFIG_SYS_TSEC2_OFFSET 0x25000
#define TSEC2_PHY_ADDR 0x1c
#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
#define TSEC2_PHYIDX 0
diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h
index e0994d12baf4..a8bb2090ec4a 100644
--- a/include/configs/ids8313.h
+++ b/include/configs/ids8313.h
@@ -164,7 +164,6 @@
#ifdef CONFIG_TSEC2
#define CONFIG_TSEC2_NAME "TSEC1"
-#define CONFIG_SYS_TSEC2_OFFSET 0x25000
#define TSEC2_PHY_ADDR 0x3
#define TSEC2_FLAGS TSEC_GIGABIT
#define TSEC2_PHYIDX 0
diff --git a/include/configs/mx6ullevk.h b/include/configs/mx6ullevk.h
index db09db44d53c..00cc547b900c 100644
--- a/include/configs/mx6ullevk.h
+++ b/include/configs/mx6ullevk.h
@@ -21,14 +21,8 @@
/* MMC Configs */
#ifdef CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
-
-/* NAND pin conflicts with usdhc2 */
-#ifdef CONFIG_SYS_USE_NAND
-#define CONFIG_SYS_FSL_USDHC_NUM 1
-#else
#define CONFIG_SYS_FSL_USDHC_NUM 2
#endif
-#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
--
2.25.1
More information about the U-Boot
mailing list