[v4 00/12] Add ASPEED SPI controller driver

[Cédric Le Goater]

On 6/26/22 06:56, Chin-Ting Kuo wrote:
> Hi All,
> 
> Are there any comments about this patch series?*

Sorry, I haven't had time to take a look at the driver. I will try this week.

Thanks,

C.

> 
> 
> Thanks.
> 
> Best Wishes,
> Chin-Ting
> 
>> -----Original Message-----
>> From: Chin-Ting Kuo <chin-ting_kuo at aspeedtech.com>
>> Sent: Tuesday, May 24, 2022 1:57 PM
>> To: ChiaWei Wang <chiawei_wang at aspeedtech.com>; lukma at denx.de;
>> seanga2 at gmail.com; Ryan Chen <ryan_chen at aspeedtech.com>; BMC-SW
>> <BMC-SW at aspeedtech.com>; jagan at amarulasolutions.com; vigneshr at ti.com;
>> clg at kaod.org; u-boot at lists.denx.de; p.yadav at ti.com
>> Subject: [v4 00/12] Add ASPEED SPI controller driver
>>
>> This patch series aims to porting ASPEED FMC/SPI memory controller driver
>> with spi-mem interface. spi-mem dirmap framework is also synchronized from
>> Linux. These patches have been verified on both
>> AST2600 and AST2500 EVBs.
>>
>> Changes in v2:
>>    - Separate defconfig files from the SPI driver patch.
>>    - Use "if (CONFIG_IS_ENABLED(SPI_DIRMAP))" to wrap
>>      spi_dirmap related functions.
>>    - Add Winbond w25q512jv flash ID.
>>
>> Changes in v3:
>>    - Get AHB bus clock frequency from the function parameter.
>>    - Fix a grammatical error in spi-mem.h.
>>
>> Changes in v4:
>>    - Fix bug when SPI_NOR_4B_OPCODES flag is set.
>>
>> Chin-Ting Kuo (12):
>>    clk: aspeed: Get HCLK frequency support
>>    pinctrl: aspeed: FWSPICS1 and SPI1CS1 pin support
>>    spi: aspeed: Add ASPEED SPI controller driver
>>    configs: aspeed: Enable SPI flash features
>>    MAINTAINERS: Add ASPEED SPI driver file
>>    arm: dts: aspeed: Update SPI flash node settings
>>    spi-mem: Add dirmap API from Linux
>>    mtd: spi-nor: Use spi-mem dirmap API
>>    spi: aspeed: SPI dirmap read support
>>    configs: aspeed: Enable CONFIG_SPI_DIRMAP
>>    mtd: spi-nor-ids: Add Winbond W25Q512JV ID
>>    spi: aspeed: Fix bug when SPI_NOR_4B_OPCODES flag is set
>>
>>   MAINTAINERS                              |   7 +
>>   arch/arm/dts/ast2500-evb.dts             |  33 +
>>   arch/arm/dts/ast2500.dtsi                |  23 +-
>>   arch/arm/dts/ast2600-evb.dts             |   8 -
>>   arch/arm/dts/ast2600.dtsi                |  34 +-
>>   configs/evb-ast2500_defconfig            |  14 +
>>   configs/evb-ast2600_defconfig            |  14 +
>>   drivers/clk/aspeed/clk_ast2500.c         |  23 +
>>   drivers/mtd/spi/sf_probe.c               |  76 ++
>>   drivers/mtd/spi/spi-nor-core.c           |  55 +-
>>   drivers/mtd/spi/spi-nor-ids.c            |   5 +
>>   drivers/pinctrl/aspeed/pinctrl_ast2500.c |   2 +
>>   drivers/spi/Kconfig                      |  18 +
>>   drivers/spi/Makefile                     |   1 +
>>   drivers/spi/spi-aspeed.c                 | 914
>> +++++++++++++++++++++++
>>   drivers/spi/spi-mem.c                    | 268 +++++++
>>   include/linux/mtd/spi-nor.h              |  18 +
>>   include/spi-mem.h                        |  79 ++
>>   18 files changed, 1546 insertions(+), 46 deletions(-)  create mode 100644
>> drivers/spi/spi-aspeed.c
>>
>> --
>> 2.25.1
>