[PATCH v2] ARM: dts: sun4i: Sync from Linux v5.18-rc1
Andre Przywara
andre.przywara at arm.com
Mon Jun 27 02:11:46 CEST 2022
On Wed, 25 May 2022 22:26:02 -0500
Samuel Holland <samuel at sholland.org> wrote:
Hi,
> Copy the devicetree source for the A10 SoC and all existing boards
> verbatim from the Linux v5.18-rc1 tag.
>
> The previous version of this change was only partially applied.
Oops, indeed. Patchwork didn't pick this one patch up, and I misapplied
this to the tree I sent the other PR from.
Thanks for noticing and the patch!
> Fixes: 4746694cba74 ("ARM: dts: sun4i: Sync from Linux v5.18-rc1")
> Signed-off-by: Samuel Holland <samuel at sholland.org>
Applied to sunxi/master, for v2022.07.
Cheers,
Andre
> ---
>
> Changes in v2:
> - Rebased. The commit that was sent in Andre's PR only contained
> changes from one file -- the one with the character set change.
>
> arch/arm/dts/Makefile | 3 +-
> arch/arm/dts/axp209.dtsi | 6 +-
> arch/arm/dts/sun4i-a10-a1000.dts | 31 ++-
> arch/arm/dts/sun4i-a10-ba10-tvbox.dts | 2 +-
> arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts | 20 +-
> arch/arm/dts/sun4i-a10-cubieboard.dts | 16 +-
> arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts | 21 +-
> arch/arm/dts/sun4i-a10-hackberry.dts | 2 +-
> arch/arm/dts/sun4i-a10-hyundai-a7hd.dts | 20 +-
> arch/arm/dts/sun4i-a10-inet1.dts | 21 +-
> arch/arm/dts/sun4i-a10-inet9f-rev03.dts | 74 ++----
> .../dts/sun4i-a10-itead-iteaduino-plus.dts | 2 +-
> arch/arm/dts/sun4i-a10-jesurun-q5.dts | 4 +-
> arch/arm/dts/sun4i-a10-marsboard.dts | 22 +-
> arch/arm/dts/sun4i-a10-olinuxino-lime.dts | 33 +--
> arch/arm/dts/sun4i-a10-pcduino.dts | 20 +-
> arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts | 21 +-
> arch/arm/dts/sun4i-a10-topwise-a721.dts | 242 ++++++++++++++++++
> arch/arm/dts/sun4i-a10.dtsi | 135 +++++++++-
> 19 files changed, 459 insertions(+), 236 deletions(-)
> create mode 100644 arch/arm/dts/sun4i-a10-topwise-a721.dts
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 0a2713c06a3c..1bceae78c3c1 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -539,7 +539,8 @@ dtb-$(CONFIG_MACH_SUN4I) += \
> sun4i-a10-olinuxino-lime.dtb \
> sun4i-a10-pcduino.dtb \
> sun4i-a10-pcduino2.dtb \
> - sun4i-a10-pov-protab2-ips9.dtb
> + sun4i-a10-pov-protab2-ips9.dtb \
> + sun4i-a10-topwise-a721.dtb
> dtb-$(CONFIG_MACH_SUN5I) += \
> sun5i-a10s-auxtek-t003.dtb \
> sun5i-a10s-auxtek-t004.dtb \
> diff --git a/arch/arm/dts/axp209.dtsi b/arch/arm/dts/axp209.dtsi
> index 0d9ff12bdf28..ca240cd6f6c3 100644
> --- a/arch/arm/dts/axp209.dtsi
> +++ b/arch/arm/dts/axp209.dtsi
> @@ -53,7 +53,7 @@
> interrupt-controller;
> #interrupt-cells = <1>;
>
> - ac_power_supply: ac-power-supply {
> + ac_power_supply: ac-power {
> compatible = "x-powers,axp202-ac-power-supply";
> status = "disabled";
> };
> @@ -69,7 +69,7 @@
> #gpio-cells = <2>;
> };
>
> - battery_power_supply: battery-power-supply {
> + battery_power_supply: battery-power {
> compatible = "x-powers,axp209-battery-power-supply";
> status = "disabled";
> };
> @@ -112,7 +112,7 @@
> };
> };
>
> - usb_power_supply: usb-power-supply {
> + usb_power_supply: usb-power {
> compatible = "x-powers,axp202-usb-power-supply";
> status = "disabled";
> };
> diff --git a/arch/arm/dts/sun4i-a10-a1000.dts b/arch/arm/dts/sun4i-a10-a1000.dts
> index 6c254ec4c85b..20f9ed244851 100644
> --- a/arch/arm/dts/sun4i-a10-a1000.dts
> +++ b/arch/arm/dts/sun4i-a10-a1000.dts
> @@ -60,15 +60,26 @@
> stdout-path = "serial0:115200n8";
> };
>
> + hdmi-connector {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_con_in: endpoint {
> + remote-endpoint = <&hdmi_out_con>;
> + };
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
>
> - red {
> + led-0 {
> label = "a1000:red:usr";
> gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>;
> };
>
> - blue {
> + led-1 {
> label = "a1000:blue:pwr";
> gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> @@ -125,7 +136,7 @@
> };
>
> &emac {
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> status = "okay";
> };
>
> @@ -133,6 +144,20 @@
> status = "okay";
> };
>
> +&de {
> + status = "okay";
> +};
> +
> +&hdmi {
> + status = "okay";
> +};
> +
> +&hdmi_out {
> + hdmi_out_con: endpoint {
> + remote-endpoint = <&hdmi_con_in>;
> + };
> +};
> +
> &i2c0 {
> status = "okay";
>
> diff --git a/arch/arm/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/dts/sun4i-a10-ba10-tvbox.dts
> index 38a2c4134952..816d534ac093 100644
> --- a/arch/arm/dts/sun4i-a10-ba10-tvbox.dts
> +++ b/arch/arm/dts/sun4i-a10-ba10-tvbox.dts
> @@ -68,7 +68,7 @@
> };
>
> &emac {
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> status = "okay";
> };
>
> diff --git a/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts
> index cf7b392dff31..74262988881c 100644
> --- a/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts
> +++ b/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts
> @@ -131,20 +131,6 @@
> status = "okay";
> };
>
> -&pio {
> - usb0_id_detect_pin: usb0-id-detect-pin {
> - pins = "PH4";
> - function = "gpio_in";
> - bias-pull-up;
> - };
> -
> - usb0_vbus_detect_pin: usb0-vbus-detect-pin {
> - pins = "PH5";
> - function = "gpio_in";
> - bias-pull-down;
> - };
> -};
> -
> ®_usb0_vbus {
> status = "okay";
> };
> @@ -165,10 +151,8 @@
> };
>
> &usbphy {
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
> - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
> + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
> + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
> usb0_vbus-supply = <®_usb0_vbus>;
> usb2_vbus-supply = <®_usb2_vbus>;
> status = "okay";
> diff --git a/arch/arm/dts/sun4i-a10-cubieboard.dts b/arch/arm/dts/sun4i-a10-cubieboard.dts
> index 197a1f2b75ff..0645d6064235 100644
> --- a/arch/arm/dts/sun4i-a10-cubieboard.dts
> +++ b/arch/arm/dts/sun4i-a10-cubieboard.dts
> @@ -75,12 +75,12 @@
> pinctrl-names = "default";
> pinctrl-0 = <&led_pins_cubieboard>;
>
> - blue {
> + led-0 {
> label = "cubieboard:blue:usr";
> gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* LED1 */
> };
>
> - green {
> + led-1 {
> label = "cubieboard:green:usr";
> gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */
> linux,default-trigger = "heartbeat";
> @@ -114,7 +114,7 @@
> };
>
> &emac {
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> status = "okay";
> };
>
> @@ -184,12 +184,6 @@
> function = "gpio_out";
> drive-strength = <20>;
> };
> -
> - usb0_id_detect_pin: usb0-id-detect-pin {
> - pins = "PH4";
> - function = "gpio_in";
> - bias-pull-up;
> - };
> };
>
> ®_ahci_5v {
> @@ -254,9 +248,7 @@
> };
>
> &usbphy {
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb0_id_detect_pin>;
> - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
> usb1_vbus-supply = <®_usb1_vbus>;
> usb2_vbus-supply = <®_usb2_vbus>;
> status = "okay";
> diff --git a/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts
> index 896e27a08727..63e77c05bfda 100644
> --- a/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts
> +++ b/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts
> @@ -62,6 +62,7 @@
> brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
> default-brightness-level = <8>;
> enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
> + power-supply = <®_vcc3v3>;
> };
>
> chosen {
> @@ -158,20 +159,6 @@
> status = "okay";
> };
>
> -&pio {
> - usb0_id_detect_pin: usb0-id-detect-pin {
> - pins = "PH4";
> - function = "gpio_in";
> - bias-pull-up;
> - };
> -
> - usb0_vbus_detect_pin: usb0-vbus-detect-pin {
> - pins = "PH5";
> - function = "gpio_in";
> - bias-pull-down;
> - };
> -};
> -
> &pwm {
> pinctrl-names = "default";
> pinctrl-0 = <&pwm0_pin>;
> @@ -223,10 +210,8 @@
> };
>
> &usbphy {
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
> - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
> + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
> + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
> usb0_vbus-supply = <®_usb0_vbus>;
> usb2_vbus-supply = <®_usb2_vbus>;
> status = "okay";
> diff --git a/arch/arm/dts/sun4i-a10-hackberry.dts b/arch/arm/dts/sun4i-a10-hackberry.dts
> index cc988ccd5ca7..47dea0922501 100644
> --- a/arch/arm/dts/sun4i-a10-hackberry.dts
> +++ b/arch/arm/dts/sun4i-a10-hackberry.dts
> @@ -80,7 +80,7 @@
> };
>
> &emac {
> - phy = <&phy0>;
> + phy-handle = <&phy0>;
> status = "okay";
> };
>
> diff --git a/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts
> index f63767cddd8e..bf2044bac42f 100644
> --- a/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts
> +++ b/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts
> @@ -86,20 +86,6 @@
> status = "okay";
> };
>
> -&pio {
> - usb0_id_detect_pin: usb0-id-detect-pin {
> - pins = "PH4";
> - function = "gpio_in";
> - bias-pull-up;
> - };
> -
> - usb0_vbus_detect_pin: usb0-vbus-detect-pin {
> - pins = "PH5";
> - function = "gpio_in";
> - bias-pull-down;
> - };
> -};
> -
> ®_usb0_vbus {
> status = "okay";
> };
> @@ -121,10 +107,8 @@
> };
>
> &usbphy {
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
> - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
> + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
> + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
> usb0_vbus-supply = <®_usb0_vbus>;
> usb2_vbus-supply = <®_usb2_vbus>;
> status = "okay";
> diff --git a/arch/arm/dts/sun4i-a10-inet1.dts b/arch/arm/dts/sun4i-a10-inet1.dts
> index 26d0c1d6a02b..60e432a0ef1c 100644
> --- a/arch/arm/dts/sun4i-a10-inet1.dts
> +++ b/arch/arm/dts/sun4i-a10-inet1.dts
> @@ -62,6 +62,7 @@
> brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
> default-brightness-level = <8>;
> enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
> + power-supply = <®_vcc3v3>;
> };
>
> chosen {
> @@ -164,20 +165,6 @@
> status = "okay";
> };
>
> -&pio {
> - usb0_id_detect_pin: usb0-id-detect-pin {
> - pins = "PH4";
> - function = "gpio_in";
> - bias-pull-up;
> - };
> -
> - usb0_vbus_detect_pin: usb0-vbus-detect-pin {
> - pins = "PH5";
> - function = "gpio_in";
> - bias-pull-down;
> - };
> -};
> -
> &pwm {
> pinctrl-names = "default";
> pinctrl-0 = <&pwm0_pin>;
> @@ -233,10 +220,8 @@
> };
>
> &usbphy {
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
> - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
> + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
> + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
> usb0_vbus-supply = <®_usb0_vbus>;
> usb1_vbus-supply = <®_usb1_vbus>;
> usb2_vbus-supply = <®_usb2_vbus>;
> diff --git a/arch/arm/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/dts/sun4i-a10-inet9f-rev03.dts
> index 221acd10f6c8..0a562b2cc5bc 100644
> --- a/arch/arm/dts/sun4i-a10-inet9f-rev03.dts
> +++ b/arch/arm/dts/sun4i-a10-inet9f-rev03.dts
> @@ -61,10 +61,6 @@
>
> gpio-keys {
> compatible = "gpio-keys-polled";
> - pinctrl-names = "default";
> - pinctrl-0 = <&key_pins_inet9f>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> poll-interval = <20>;
>
> left-joystick-left {
> @@ -72,7 +68,7 @@
> linux,code = <ABS_X>;
> linux,input-type = <EV_ABS>;
> linux,input-value = <0xffffffff>; /* -1 */
> - gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
> + gpios = <&pio 0 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA6 */
> };
>
> left-joystick-right {
> @@ -80,7 +76,7 @@
> linux,code = <ABS_X>;
> linux,input-type = <EV_ABS>;
> linux,input-value = <1>;
> - gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
> + gpios = <&pio 0 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA5 */
> };
>
> left-joystick-up {
> @@ -88,7 +84,7 @@
> linux,code = <ABS_Y>;
> linux,input-type = <EV_ABS>;
> linux,input-value = <0xffffffff>; /* -1 */
> - gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
> + gpios = <&pio 0 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA8 */
> };
>
> left-joystick-down {
> @@ -96,7 +92,7 @@
> linux,code = <ABS_Y>;
> linux,input-type = <EV_ABS>;
> linux,input-value = <1>;
> - gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
> + gpios = <&pio 0 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA9 */
> };
>
> right-joystick-left {
> @@ -104,7 +100,7 @@
> linux,code = <ABS_Z>;
> linux,input-type = <EV_ABS>;
> linux,input-value = <0xffffffff>; /* -1 */
> - gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
> + gpios = <&pio 0 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA1 */
> };
>
> right-joystick-right {
> @@ -112,7 +108,7 @@
> linux,code = <ABS_Z>;
> linux,input-type = <EV_ABS>;
> linux,input-value = <1>;
> - gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
> + gpios = <&pio 0 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA0 */
> };
>
> right-joystick-up {
> @@ -120,7 +116,7 @@
> linux,code = <ABS_RZ>;
> linux,input-type = <EV_ABS>;
> linux,input-value = <0xffffffff>; /* -1 */
> - gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
> + gpios = <&pio 0 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA3 */
> };
>
> right-joystick-down {
> @@ -128,7 +124,7 @@
> linux,code = <ABS_RZ>;
> linux,input-type = <EV_ABS>;
> linux,input-value = <1>;
> - gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
> + gpios = <&pio 0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA4 */
> };
>
> dpad-left {
> @@ -136,7 +132,7 @@
> linux,code = <ABS_HAT0X>;
> linux,input-type = <EV_ABS>;
> linux,input-value = <0xffffffff>; /* -1 */
> - gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */
> + gpios = <&pio 7 23 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH23 */
> };
>
> dpad-right {
> @@ -144,7 +140,7 @@
> linux,code = <ABS_HAT0X>;
> linux,input-type = <EV_ABS>;
> linux,input-value = <1>;
> - gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
> + gpios = <&pio 7 24 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH24 */
> };
>
> dpad-up {
> @@ -152,7 +148,7 @@
> linux,code = <ABS_HAT0Y>;
> linux,input-type = <EV_ABS>;
> linux,input-value = <0xffffffff>; /* -1 */
> - gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
> + gpios = <&pio 7 25 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH25 */
> };
>
> dpad-down {
> @@ -160,55 +156,55 @@
> linux,code = <ABS_HAT0Y>;
> linux,input-type = <EV_ABS>;
> linux,input-value = <1>;
> - gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
> + gpios = <&pio 7 26 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH26 */
> };
>
> x {
> label = "Button X";
> linux,code = <BTN_X>;
> - gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */
> + gpios = <&pio 0 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA16 */
> };
>
> y {
> label = "Button Y";
> linux,code = <BTN_Y>;
> - gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */
> + gpios = <&pio 0 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA14 */
> };
>
> a {
> label = "Button A";
> linux,code = <BTN_A>;
> - gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
> + gpios = <&pio 0 17 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA17 */
> };
>
> b {
> label = "Button B";
> linux,code = <BTN_B>;
> - gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */
> + gpios = <&pio 0 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA15 */
> };
>
> select {
> label = "Select Button";
> linux,code = <BTN_SELECT>;
> - gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
> + gpios = <&pio 0 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA11 */
> };
>
> start {
> label = "Start Button";
> linux,code = <BTN_START>;
> - gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
> + gpios = <&pio 0 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA12 */
> };
>
> top-left {
> label = "Top Left Button";
> linux,code = <BTN_TL>;
> - gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
> + gpios = <&pio 7 22 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH22 */
> };
>
> top-right {
> label = "Top Right Button";
> linux,code = <BTN_TR>;
> - gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */
> + gpios = <&pio 0 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA13 */
> };
> };
> };
> @@ -308,30 +304,6 @@
> status = "okay";
> };
>
> -&pio {
> - key_pins_inet9f: key-pins {
> - pins = "PA0", "PA1", "PA3", "PA4",
> - "PA5", "PA6", "PA8", "PA9",
> - "PA11", "PA12", "PA13",
> - "PA14", "PA15", "PA16", "PA17",
> - "PH22", "PH23", "PH24", "PH25", "PH26";
> - function = "gpio_in";
> - bias-pull-up;
> - };
> -
> - usb0_id_detect_pin: usb0-id-detect-pin {
> - pins = "PH4";
> - function = "gpio_in";
> - bias-pull-up;
> - };
> -
> - usb0_vbus_detect_pin: usb0-vbus-detect-pin {
> - pins = "PH5";
> - function = "gpio_in";
> - bias-pull-down;
> - };
> -};
> -
> ®_dcdc2 {
> regulator-always-on;
> regulator-min-microvolt = <1000000>;
> @@ -377,10 +349,8 @@
> };
>
> &usbphy {
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
> - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
> + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
> + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
> usb0_vbus-supply = <®_usb0_vbus>;
> usb2_vbus-supply = <®_usb2_vbus>;
> status = "okay";
> diff --git a/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts
> index 80ecd78247ac..d4e319d16aae 100644
> --- a/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts
> +++ b/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts
> @@ -58,7 +58,7 @@
> &emac {
> pinctrl-names = "default";
> pinctrl-0 = <&emac_pins>;
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> status = "okay";
> };
>
> diff --git a/arch/arm/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/dts/sun4i-a10-jesurun-q5.dts
> index 247fa27ef717..1aeb0bd5519e 100644
> --- a/arch/arm/dts/sun4i-a10-jesurun-q5.dts
> +++ b/arch/arm/dts/sun4i-a10-jesurun-q5.dts
> @@ -63,7 +63,7 @@
> leds {
> compatible = "gpio-leds";
>
> - green {
> + led {
> label = "q5:green:usr";
> gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */
> };
> @@ -94,7 +94,7 @@
> };
>
> &emac {
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> status = "okay";
> };
>
> diff --git a/arch/arm/dts/sun4i-a10-marsboard.dts b/arch/arm/dts/sun4i-a10-marsboard.dts
> index 0dbf69576512..81fdb217d339 100644
> --- a/arch/arm/dts/sun4i-a10-marsboard.dts
> +++ b/arch/arm/dts/sun4i-a10-marsboard.dts
> @@ -62,22 +62,22 @@
> leds {
> compatible = "gpio-leds";
>
> - red1 {
> + led-0 {
> label = "marsboard:red1:usr";
> gpios = <&pio 1 5 GPIO_ACTIVE_HIGH>;
> };
>
> - red2 {
> + led-1 {
> label = "marsboard:red2:usr";
> gpios = <&pio 1 6 GPIO_ACTIVE_HIGH>;
> };
>
> - red3 {
> + led-2 {
> label = "marsboard:red3:usr";
> gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
> };
>
> - red4 {
> + led-3 {
> label = "marsboard:red4:usr";
> gpios = <&pio 1 8 GPIO_ACTIVE_HIGH>;
> };
> @@ -105,7 +105,7 @@
> };
>
> &emac {
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> status = "okay";
> };
>
> @@ -148,14 +148,6 @@
> status = "okay";
> };
>
> -&pio {
> - usb0_id_detect_pin: usb0-id-detect-pin {
> - pins = "PH4";
> - function = "gpio_in";
> - bias-pull-up;
> - };
> -};
> -
> ®_usb1_vbus {
> status = "okay";
> };
> @@ -183,9 +175,7 @@
> };
>
> &usbphy {
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb0_id_detect_pin>;
> - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
> usb1_vbus-supply = <®_usb1_vbus>;
> usb2_vbus-supply = <®_usb2_vbus>;
> status = "okay";
> diff --git a/arch/arm/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/dts/sun4i-a10-olinuxino-lime.dts
> index b74a61496537..83d283cf6633 100644
> --- a/arch/arm/dts/sun4i-a10-olinuxino-lime.dts
> +++ b/arch/arm/dts/sun4i-a10-olinuxino-lime.dts
> @@ -74,7 +74,7 @@
> pinctrl-names = "default";
> pinctrl-0 = <&led_pins_olinuxinolime>;
>
> - green {
> + led {
> label = "a10-olinuxino-lime:green:usr";
> gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> @@ -91,12 +91,11 @@
> /*
> * The A10-Lime is known to be unstable when running at 1008 MHz
> */
> - operating-points = <
> - /* kHz uV */
> - 912000 1350000
> - 864000 1300000
> - 624000 1250000
> - >;
> + operating-points =
> + /* kHz uV */
> + <912000 1350000>,
> + <864000 1300000>,
> + <624000 1250000>;
> };
>
> &de {
> @@ -112,7 +111,7 @@
> };
>
> &emac {
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> status = "okay";
> };
>
> @@ -186,18 +185,6 @@
> function = "gpio_out";
> drive-strength = <20>;
> };
> -
> - usb0_id_detect_pin: usb0-id-detect-pin {
> - pins = "PH4";
> - function = "gpio_in";
> - bias-pull-up;
> - };
> -
> - usb0_vbus_detect_pin: usb0-vbus-detect-pin {
> - pins = "PH5";
> - function = "gpio_in";
> - bias-pull-down;
> - };
> };
>
> ®_ahci_5v {
> @@ -229,10 +216,8 @@
> };
>
> &usbphy {
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
> - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
> + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
> + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH5 */
> usb0_vbus-supply = <®_usb0_vbus>;
> usb1_vbus-supply = <®_usb1_vbus>;
> usb2_vbus-supply = <®_usb2_vbus>;
> diff --git a/arch/arm/dts/sun4i-a10-pcduino.dts b/arch/arm/dts/sun4i-a10-pcduino.dts
> index b97a0f2f20b9..1ac82376baef 100644
> --- a/arch/arm/dts/sun4i-a10-pcduino.dts
> +++ b/arch/arm/dts/sun4i-a10-pcduino.dts
> @@ -63,12 +63,12 @@
> leds {
> compatible = "gpio-leds";
>
> - tx {
> + led-0 {
> label = "pcduino:green:tx";
> gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
> };
>
> - rx {
> + led-1 {
> label = "pcduino:green:rx";
> gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
> };
> @@ -76,8 +76,6 @@
>
> gpio-keys {
> compatible = "gpio-keys";
> - #address-cells = <1>;
> - #size-cells = <0>;
>
> back {
> label = "Key Back";
> @@ -112,7 +110,7 @@
> };
>
> &emac {
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> status = "okay";
> };
>
> @@ -156,14 +154,6 @@
> status = "okay";
> };
>
> -&pio {
> - usb0_id_detect_pin: usb0-id-detect-pin {
> - pins = "PH4";
> - function = "gpio_in";
> - bias-pull-up;
> - };
> -};
> -
> #include "axp209.dtsi"
>
> ®_dcdc2 {
> @@ -203,9 +193,7 @@
> };
>
> &usbphy {
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb0_id_detect_pin>;
> - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
> usb1_vbus-supply = <®_vcc5v0>; /* USB1 VBUS is always on */
> usb2_vbus-supply = <®_vcc5v0>; /* USB2 VBUS is always on */
> status = "okay";
> diff --git a/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts
> index 84b25be1ac94..c32596947647 100644
> --- a/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts
> +++ b/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts
> @@ -62,6 +62,7 @@
> brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
> default-brightness-level = <8>;
> enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
> + power-supply = <®_vcc3v3>;
> };
>
> chosen {
> @@ -146,20 +147,6 @@
> status = "okay";
> };
>
> -&pio {
> - usb0_id_detect_pin: usb0-id-detect-pin {
> - pins = "PH4";
> - function = "gpio_in";
> - bias-pull-up;
> - };
> -
> - usb0_vbus_detect_pin: usb0-vbus-detect-pin {
> - pins = "PH5";
> - function = "gpio_in";
> - bias-pull-down;
> - };
> -};
> -
> &pwm {
> pinctrl-names = "default";
> pinctrl-0 = <&pwm0_pin>;
> @@ -211,10 +198,8 @@
> };
>
> &usbphy {
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
> - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
> + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
> + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
> usb0_vbus-supply = <®_usb0_vbus>;
> usb1_vbus-supply = <®_usb1_vbus>;
> status = "okay";
> diff --git a/arch/arm/dts/sun4i-a10-topwise-a721.dts b/arch/arm/dts/sun4i-a10-topwise-a721.dts
> new file mode 100644
> index 000000000000..3628f12d2521
> --- /dev/null
> +++ b/arch/arm/dts/sun4i-a10-topwise-a721.dts
> @@ -0,0 +1,242 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2020 Pascal Roeleven <dev at pascalroeleven.nl>
> + */
> +
> +/dts-v1/;
> +#include "sun4i-a10.dtsi"
> +#include "sunxi-common-regulators.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/pwm/pwm.h>
> +
> +/ {
> + model = "Topwise A721";
> + compatible = "topwise,a721", "allwinner,sun4i-a10";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + pwms = <&pwm 0 100000 PWM_POLARITY_INVERTED>;
> + power-supply = <®_vbat>;
> + enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
> + brightness-levels = <0 30 40 50 60 70 80 90 100>;
> + default-brightness-level = <8>;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + panel {
> + compatible = "starry,kr070pe2t";
> + backlight = <&backlight>;
> + power-supply = <®_lcd_power>;
> +
> + port {
> + panel_input: endpoint {
> + remote-endpoint = <&tcon0_out_panel>;
> + };
> + };
> + };
> +
> + reg_lcd_power: reg-lcd-power {
> + compatible = "regulator-fixed";
> + regulator-name = "reg-lcd-power";
> + gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
> + enable-active-high;
> + };
> +
> + reg_vbat: reg-vbat {
> + compatible = "regulator-fixed";
> + regulator-name = "vbat";
> + regulator-min-microvolt = <3700000>;
> + regulator-max-microvolt = <3700000>;
> + };
> +
> +};
> +
> +&codec {
> + status = "okay";
> +};
> +
> +&cpu0 {
> + cpu-supply = <®_dcdc2>;
> +};
> +
> +&de {
> + status = "okay";
> +};
> +
> +&ehci0 {
> + status = "okay";
> +};
> +
> +&ehci1 {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + axp209: pmic at 34 {
> + reg = <0x34>;
> + interrupts = <0>;
> + };
> +};
> +
> +#include "axp209.dtsi"
> +
> +&ac_power_supply {
> + status = "okay";
> +};
> +
> +&battery_power_supply {
> + status = "okay";
> +};
> +
> +&i2c1 {
> + status = "okay";
> +
> + accelerometer at 4c {
> + compatible = "fsl,mma7660";
> + reg = <0x4c>;
> + };
> +};
> +
> +&i2c2 {
> + status = "okay";
> +
> + touchscreen at 38 {
> + compatible = "edt,edt-ft5406";
> + reg = <0x38>;
> + interrupt-parent = <&pio>;
> + interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
> + touchscreen-size-x = <800>;
> + touchscreen-size-y = <480>;
> + vcc-supply = <®_vcc3v3>;
> + };
> +};
> +
> +&lradc {
> + vref-supply = <®_ldo2>;
> + status = "okay";
> +
> + button-571 {
> + label = "Volume Up";
> + linux,code = <KEY_VOLUMEUP>;
> + channel = <0>;
> + voltage = <571428>;
> + };
> +
> + button-761 {
> + label = "Volume Down";
> + linux,code = <KEY_VOLUMEDOWN>;
> + channel = <0>;
> + voltage = <761904>;
> + };
> +};
> +
> +&mmc0 {
> + vmmc-supply = <®_vcc3v3>;
> + bus-width = <4>;
> + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */
> + status = "okay";
> +};
> +
> +&ohci0 {
> + status = "okay";
> +};
> +
> +&ohci1 {
> + status = "okay";
> +};
> +
> +&otg_sram {
> + status = "okay";
> +};
> +
> +&pio {
> + vcc-pb-supply = <®_vcc3v3>;
> + vcc-pf-supply = <®_vcc3v3>;
> + vcc-ph-supply = <®_vcc3v3>;
> +};
> +
> +&pwm {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pwm0_pin>;
> + status = "okay";
> +};
> +
> +®_dcdc2 {
> + regulator-always-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-name = "vdd-cpu";
> +};
> +
> +®_dcdc3 {
> + regulator-always-on;
> + regulator-min-microvolt = <1250000>;
> + regulator-max-microvolt = <1250000>;
> + regulator-name = "vdd-int-dll";
> +};
> +
> +®_ldo1 {
> + regulator-name = "vdd-rtc";
> +};
> +
> +®_ldo2 {
> + regulator-always-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-name = "avcc";
> +};
> +
> +®_usb0_vbus {
> + status = "okay";
> +};
> +
> +®_usb1_vbus {
> + status = "okay";
> +};
> +
> +®_usb2_vbus {
> + status = "okay";
> +};
> +
> +&tcon0_out {
> + tcon0_out_panel: endpoint at 0 {
> + reg = <0>;
> + remote-endpoint = <&panel_input>;
> + };
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_pb_pins>;
> + status = "okay";
> +};
> +
> +&usb_otg {
> + dr_mode = "otg";
> + status = "okay";
> +};
> +
> +&usb_power_supply {
> + status = "okay";
> +};
> +
> +&usbphy {
> + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
> + usb0_vbus-supply = <®_usb0_vbus>;
> + usb1_vbus-supply = <®_usb1_vbus>;
> + usb2_vbus-supply = <®_usb2_vbus>;
> + status = "okay";
> +};
> diff --git a/arch/arm/dts/sun4i-a10.dtsi b/arch/arm/dts/sun4i-a10.dtsi
> index 3a1c6b45c9a1..51a6464aab9a 100644
> --- a/arch/arm/dts/sun4i-a10.dtsi
> +++ b/arch/arm/dts/sun4i-a10.dtsi
> @@ -115,13 +115,12 @@
> reg = <0x0>;
> clocks = <&ccu CLK_CPU>;
> clock-latency = <244144>; /* 8 32k periods */
> - operating-points = <
> + operating-points =
> /* kHz uV */
> - 1008000 1400000
> - 912000 1350000
> - 864000 1300000
> - 624000 1250000
> - >;
> + <1008000 1400000>,
> + <912000 1350000>,
> + <864000 1300000>,
> + <624000 1250000>;
> #cooling-cells = <2>;
> };
> };
> @@ -143,7 +142,7 @@
> trips {
> cpu_alert0: cpu-alert0 {
> /* milliCelsius */
> - temperature = <850000>;
> + temperature = <85000>;
> hysteresis = <2000>;
> type = "passive";
> };
> @@ -184,14 +183,34 @@
> status = "disabled";
> };
>
> + pmu {
> + compatible = "arm,cortex-a8-pmu";
> + interrupts = <3>;
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + /* Address must be kept in the lower 256 MiBs of DRAM for VE. */
> + default-pool {
> + compatible = "shared-dma-pool";
> + size = <0x6000000>;
> + alloc-ranges = <0x40000000 0x10000000>;
> + reusable;
> + linux,cma-default;
> + };
> + };
> +
> soc {
> compatible = "simple-bus";
> #address-cells = <1>;
> #size-cells = <1>;
> ranges;
>
> - sram-controller at 1c00000 {
> - compatible = "allwinner,sun4i-a10-sram-controller";
> + system-control at 1c00000 {
> + compatible = "allwinner,sun4i-a10-system-control";
> reg = <0x01c00000 0x30>;
> #address-cells = <1>;
> #size-cells = <1>;
> @@ -224,6 +243,19 @@
> status = "disabled";
> };
> };
> +
> + sram_c: sram at 1d00000 {
> + compatible = "mmio-sram";
> + reg = <0x01d00000 0xd0000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x01d00000 0xd0000>;
> +
> + ve_sram: sram-section at 0 {
> + compatible = "allwinner,sun4i-a10-sram-c1";
> + reg = <0x000000 0x80000>;
> + };
> + };
> };
>
> dma: dma-controller at 1c02000 {
> @@ -234,7 +266,7 @@
> #dma-cells = <2>;
> };
>
> - nfc: nand at 1c03000 {
> + nfc: nand-controller at 1c03000 {
> compatible = "allwinner,sun4i-a10-nand";
> reg = <0x01c03000 0x1000>;
> interrupts = <37>;
> @@ -309,6 +341,7 @@
> "tcon-ch0",
> "tcon-ch1";
> clock-output-names = "tcon0-pixel-clock";
> + #clock-cells = <0>;
> dmas = <&dma SUN4I_DMA_DEDICATED 14>;
>
> ports {
> @@ -358,6 +391,7 @@
> "tcon-ch0",
> "tcon-ch1";
> clock-output-names = "tcon1-pixel-clock";
> + #clock-cells = <0>;
> dmas = <&dma SUN4I_DMA_DEDICATED 15>;
>
> ports {
> @@ -394,6 +428,17 @@
> };
> };
>
> + video-codec at 1c0e000 {
> + compatible = "allwinner,sun4i-a10-video-engine";
> + reg = <0x01c0e000 0x1000>;
> + clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
> + <&ccu CLK_DRAM_VE>;
> + clock-names = "ahb", "mod", "ram";
> + resets = <&ccu RST_VE>;
> + interrupts = <53>;
> + allwinner,sram = <&ve_sram 1>;
> + };
> +
> mmc0: mmc at 1c0f000 {
> compatible = "allwinner,sun4i-a10-mmc";
> reg = <0x01c0f000 0x1000>;
> @@ -450,13 +495,14 @@
> phy-names = "usb";
> extcon = <&usbphy 0>;
> allwinner,sram = <&otg_sram 1>;
> + dr_mode = "otg";
> status = "disabled";
> };
>
> usbphy: phy at 1c13400 {
> #phy-cells = <1>;
> compatible = "allwinner,sun4i-a10-usb-phy";
> - reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
> + reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
> reg-names = "phy_ctrl", "pmu1", "pmu2";
> clocks = <&ccu CLK_USB_PHY>;
> clock-names = "usb_phy";
> @@ -530,8 +576,6 @@
> };
>
> hdmi_out: port at 1 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> reg = <1>;
> };
> };
> @@ -579,6 +623,16 @@
> status = "disabled";
> };
>
> + csi1: csi at 1c1d000 {
> + compatible = "allwinner,sun4i-a10-csi1";
> + reg = <0x01c1d000 0x1000>;
> + interrupts = <43>;
> + clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>;
> + clock-names = "bus", "ram";
> + resets = <&ccu RST_CSI1>;
> + status = "disabled";
> + };
> +
> spi3: spi at 1c1f000 {
> compatible = "allwinner,sun4i-a10-spi";
> reg = <0x01c1f000 0x1000>;
> @@ -625,6 +679,31 @@
> function = "can";
> };
>
> + /omit-if-no-ref/
> + csi1_8bits_pg_pins: csi1-8bits-pg-pins {
> + pins = "PG0", "PG2", "PG3", "PG4", "PG5",
> + "PG6", "PG7", "PG8", "PG9", "PG10",
> + "PG11";
> + function = "csi1";
> + };
> +
> + /omit-if-no-ref/
> + csi1_24bits_ph_pins: csi1-24bits-ph-pins {
> + pins = "PH0", "PH1", "PH2", "PH3", "PH4",
> + "PH5", "PH6", "PH7", "PH8", "PH9",
> + "PH10", "PH11", "PH12", "PH13", "PH14",
> + "PH15", "PH16", "PH17", "PH18", "PH19",
> + "PH20", "PH21", "PH22", "PH23", "PH24",
> + "PH25", "PH26", "PH27";
> + function = "csi1";
> + };
> +
> + /omit-if-no-ref/
> + csi1_clk_pg_pin: csi1-clk-pg-pin {
> + pins = "PG1";
> + function = "csi1";
> + };
> +
> emac_pins: emac0-pins {
> pins = "PA0", "PA1", "PA2",
> "PA3", "PA4", "PA5", "PA6",
> @@ -762,13 +841,20 @@
> timer at 1c20c00 {
> compatible = "allwinner,sun4i-a10-timer";
> reg = <0x01c20c00 0x90>;
> - interrupts = <22>;
> + interrupts = <22>,
> + <23>,
> + <24>,
> + <25>,
> + <67>,
> + <68>;
> clocks = <&osc24M>;
> };
>
> wdt: watchdog at 1c20c90 {
> compatible = "allwinner,sun4i-a10-wdt";
> reg = <0x01c20c90 0x10>;
> + interrupts = <24>;
> + clocks = <&osc24M>;
> };
>
> rtc: rtc at 1c20d00 {
> @@ -1001,6 +1087,27 @@
> status = "disabled";
> };
>
> + mali: gpu at 1c40000 {
> + compatible = "allwinner,sun4i-a10-mali", "arm,mali-400";
> + reg = <0x01c40000 0x10000>;
> + interrupts = <69>,
> + <70>,
> + <71>,
> + <72>,
> + <73>;
> + interrupt-names = "gp",
> + "gpmmu",
> + "pp0",
> + "ppmmu0",
> + "pmu";
> + clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
> + clock-names = "bus", "core";
> + resets = <&ccu RST_GPU>;
> +
> + assigned-clocks = <&ccu CLK_GPU>;
> + assigned-clock-rates = <384000000>;
> + };
> +
> fe0: display-frontend at 1e00000 {
> compatible = "allwinner,sun4i-a10-display-frontend";
> reg = <0x01e00000 0x20000>;
More information about the U-Boot
mailing list