[PATCH 1/4] doc: Migrate CodingStyle wiki page to sphinx
Tom Rini
trini at konsulko.com
Mon Jun 27 19:17:19 CEST 2022
Move the current CodingStyle wiki page to doc/develop/codingstyle.rst.
The changes here are for formatting or slight rewording so that it reads
well when linking to other sphinx documents.
Signed-off-by: Tom Rini <trini at konsulko.com>
---
doc/develop/codingstyle.rst | 211 ++++++++++++++++++++++++++++++++++++
doc/develop/index.rst | 8 ++
2 files changed, 219 insertions(+)
create mode 100644 doc/develop/codingstyle.rst
diff --git a/doc/develop/codingstyle.rst b/doc/develop/codingstyle.rst
new file mode 100644
index 000000000000..a41aed2764fb
--- /dev/null
+++ b/doc/develop/codingstyle.rst
@@ -0,0 +1,211 @@
+.. SPDX-License-Identifier: GPL-2.0+:
+
+U-Boot Coding Style
+===================
+
+The following Coding Style requirements shall be mandatory for all code contributed to
+the U-Boot project.
+
+Exceptions are only allowed if code from other projects is integrated with no
+or only minimal changes.
+
+The following rules apply:
+
+* All contributions to U-Boot should conform to the `Linux kernel
+ coding style <https://www.kernel.org/doc/html/latest/process/coding-style.html>`_
+ and the `Linent script <https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/scripts/Lindent>`_.
+ * The exception for net files to the `multi-line comment
+ <https://www.kernel.org/doc/html/latest/process/coding-style.html#commenting>`_
+ applies only to Linux, not to U-Boot. Only large hunks which are copied
+ unchanged from Linux may retain that comment format.
+* Use patman to send your patches (``tools/patman/patman -H`` for full
+ instructions). With a few tags in your commits this will check your patches
+ and take care of emailing them.
+* If you don't use patman, make sure to run ``scripts/checkpatch.pl``. For
+ more information, read :doc:`checkpatch`. Note that this should be done
+ *before* posting on the mailing list!
+* Source files originating from different projects (for example the MTD
+ subsystem or the hush shell code from the BusyBox project) may, after
+ careful consideration, be exempted from these rules. For such files, the
+ original coding style may be kept to ease subsequent migration to newer
+ versions of those sources.
+* Please note that U-Boot is implemented in C (and to some small parts in
+ Assembler); no C++ is used, so please do not use C++ style comments (//) in
+ your code.
+
+ * The sole exception here is for SPDX tags in some files (checkpatch.pl will warn you).
+
+* Please also stick to the following formatting rules:
+
+ * Remove any trailing white space
+ * Use TAB characters for indentation and vertical alignment, not spaces
+ * Make sure NOT to use DOS ``\r\n`` line feeds
+ * Do not add more than 2 consecutive empty lines to source files
+ * Do not add trailing empty lines to source files
+ * Using the option ``git config --global color.diff auto`` will help to
+ visually see whitespace problems in ``diff`` output from ``git``.
+ * In Emacs one can use ``=M-x whitespace-global-mode=`` to get visual
+ feedback on the nasty details. ``=M-x whitespace-cleanup=`` does The Right
+ Thing (tm)
+
+Submissions of new code or patches that do not conform to these requirements
+shall be rejected with a request to reformat the changes.
+
+U-Boot Code Documentation
+-------------------------
+
+U-Boot adopted the kernel-doc annotation style, this is the only exception from
+multi-line comment rule of Coding Style. While not mandatory, adding
+documentation is strongly advised. The Linux kernel `kernel-doc <https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html>`_ documentation applies with no changes.
+applies with no changes.
+
+Use structures for I/O access
+-----------------------------
+
+U-Boot typically uses a C structure to map out the registers in an I/O region, rather than offsets. The reasons for this are:
+
+* It dissociates the register location (offset) from the register type, which
+ means the developer has to make sure the type is right for each access,
+ whereas with the struct method, this is checked by the compiler;
+* It avoids actually writing all offsets, which is (more) error- prone;
+* It allows for better compile time sanity-checking of values we write to registers.
+
+Some reasons why you might not use C structures:
+
+* Where the registers appear at different offsets in different hardware
+ revisions supported by the same driver
+* Where the driver only uses a small subset of registers and it is not worth
+ defining a struct to cover them all, with large empty regions
+* Where the offset of a register might be hard to figure out when buried a long
+ way down a structure, possibly with embedded sub-structures
+* This may need to change to the kernel model if we allow for more run-time
+ detection of what drivers are appropriate for what we're running on.
+
+Please use check_member() to verify that your structure is the expected size, or that particular members appear at the right offset.
+
+Include files
+-------------
+
+You should follow this ordering in U-Boot. The common.h header (which is going away at some point) should always be first, followed by other headers in order, then headers with directories, then local files::
+
+ <common.h>
+ <bootstage.h>
+ <dm.h>
+ <others.h>
+ <asm/...>
+ <arm/arch/...>
+ <dm/device_compat/.h>
+ <linux/...>
+ "local.h"
+
+Within that order, sort your includes.
+
+It is important to include common.h first since it provides basic features used by most files, e.g. CONFIG options.
+
+For files that need to be compiled for the host (e.g. tools), you need to use ``#ifndef USE_HOSTCC`` to avoid including common.h since it includes a lot of internal U-Boot things. See common/image.c for an example.
+
+If your file uses driver model, include <dm.h> in the C file. Do not include dm.h in a header file. Try to use forward declarations (e.g. ``struct udevice``) instead.
+
+Filenames
+---------
+
+For .c and .h files try to use underscore rather than hyphen unless you want the file to stand out (e.g. driver-model uclasses should be named xxx-uclass.h. Avoid upper case and keep the names fairly short.
+
+Function and struct comments
+----------------------------
+
+Non-trivial functions should have a comment which describes what they do. If it is an exported function, put the comment in the header file so the API is in one place. If it is a static function, put it in the C file.
+
+If the function returns errors, mention that and list the different errors that are returned. If it is merely passing errors back from a function it calls, then you can skip that.
+
+See `here <https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html#function-documentation>`_ for style.
+
+Driver model
+------------
+
+When declaring a device, try to use ``struct udevice *dev``, i.e. ``dev`` as the name::
+
+ struct udevice *dev;
+
+Use ``ret`` as the return value::
+
+ struct udevice *dev;
+ int ret;
+
+ ret = uclass_first_device_err(UCLASS_ACPI_PMC, &dev);
+ if (ret)
+ return log_msg_ret("pmc", dev);
+
+Consider using log_reg() or log_msg_ret() to return a value (see above)
+
+Add a ``p`` suffix on return arguments::
+
+ int dm_pci_find_class(uint find_class, int index, struct udevice **devp)
+ {
+ ...
+ *devp = dev;
+
+ return 0;
+ }
+
+There are standard variable names that you should use in drivers:
+
+* ``struct xxx_priv`` and ``priv`` for dev_get_priv()
+* ``struct xxx_plat`` and ``plat`` for dev_get_platdata()
+
+For example::
+
+ struct simple_bus_plat {
+ u32 base;
+ u32 size;
+ u32 target;
+ };
+
+ /* Davinci MMC board definitions */
+ struct davinci_mmc_priv {
+ struct davinci_mmc_regs *reg_base; /* Register base address */
+ uint input_clk; /* Input clock to MMC controller */
+ struct gpio_desc cd_gpio; /* Card Detect GPIO */
+ struct gpio_desc wp_gpio; /* Write Protect GPIO */
+ };
+
+ struct rcar_gpio_priv *priv = dev_get_priv(dev);
+
+ struct pl01x_serial_platdata *plat = dev_get_platdata(dev);
+
+Other
+-----
+
+Some minor things:
+
+* Put a blank line before the last ``return`` in a function unless it is the only line::
+
+ struct udevice *pci_get_controller(struct udevice *dev)
+ {
+ while (device_is_on_pci_bus(dev))
+ dev = dev->parent;
+
+ return dev;
+ }
+
+Tests
+-----
+
+
+Please add tests when you add code. Please change or expand tests when you change code.
+
+Run the tests with::
+
+ make check
+ make qcheck (skips some tests)
+
+Python tests are in test/py/tests - see the docs in test/py for info.
+
+Try to write your tests in C if you can. For example, tests to check a command
+will be much faster (10-100x or more) if they can directly call run_command()
+and ut_check_console_line() instead of using Python to send commands over a
+pipe to U-Boot.
+
+Tests run all supported CI systems (gitlab, travis, azure) using scripts in the
+root of the U-Boot tree.
+
diff --git a/doc/develop/index.rst b/doc/develop/index.rst
index fe3564a9fbf4..dde47994c71a 100644
--- a/doc/develop/index.rst
+++ b/doc/develop/index.rst
@@ -3,6 +3,14 @@
Develop U-Boot
==============
+General
+-------
+
+.. toctree::
+ :maxdepth: 1
+
+ codingstyle
+
Implementation
--------------
--
2.25.1
More information about the U-Boot
mailing list