[PATCH v3] powerpc: mpc85xx: Set TEXT_BASE addresses to real base values

[Tom Rini]

On Thu, Jun 16, 2022 at 02:19:44PM +0200, Pali Rohár wrote:

> Currently CONFIG_SPL_TEXT_BASE and CONFIG_SYS_TEXT_BASE addresses are
> manually increased by 0x1000 due to .bootpg section. This section has size
> of 0x1000 bytes and is manually put by linker script before .text section
> (and therefore before base address) when CONFIG_SYS_MPC85XX_NO_RESETVEC is
> set. Due to this fact lot of other config options are manually increased by
> 0x1000 value to make correct layout. Note that entry point is not on
> CONFIG_SPL_TEXT_BASE (image+0x1000) but it is really on address
> CONFIG_SPL_TEXT_BASE-0x1000 (means at the start of the image).
> 
> Cleanup handling of .bootpg section when CONFIG_SYS_MPC85XX_NO_RESETVEC is
> set. Put .bootpg code directly into .text section and move text base
> address to the start of .bootpg code. And finally remove +0x1000 value from
> lot of config options. With this removal custom PHDRS is not used anymore,
> so remove it too.
> 
> After this change entry point would be at CONFIG_SPL_TEXT_BASE and not at
> address -0x1000 anymore.
> 
> Tested on P2020 board with SPL and proper U-Boot.
> 
> Signed-off-by: Pali Rohár <pali at kernel.org>

Applied to u-boot/next, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20220628/a6a6c36e/attachment.sig>