回复: minor regression in U-Boot 2022.04

[Daniel Golle]

Hi Weijie,

On Tue, Apr 12, 2022 at 01:40:00AM +0000, Weijie Gao (高惟杰) wrote:
> Hi Daniel,
> 
> I've also noticed this error message.
> It seems that some struct variables containing all zero data of the pinctrl driver are not set to const, which causes these variables to be put into .bss section, instead of .rodata section.
> As you know the .bss section does not exist in board_init_f stage, and its place is overlapped by dtb used by u-boot. This will result in incorrect data used by the pinctrl driver.
> 
> I'll try to fix it later.

Any news about the gobbled serial output issue?
It would be nice to update uboot-mediatek in OpenWrt to v2022.04, so
MT798x patches will easily apply on top.

Cheers

Daniel


> 
> Best Regards
> 
> Weijie
> 
> -----邮件原件-----
> 发件人: Daniel Golle <daniel at makrotopia.org> 
> 发送时间: 2022年4月12日 6:44
> 收件人: u-boot at lists.denx.de; Weijie Gao (高惟杰) <Weijie.Gao at mediatek.com>
> 主题: minor regression in U-Boot 2022.04
> 
> Hi!
> 
> I'm about to bump the U-Boot build for MediaTek MT7622 boards in OpenWrt to U-Boot 2022.04. While practially everything seems to work fine, I've noticed an error message early in the serial output which was not present in U-Boot 2022.01. It is even followed by a bunch of random characters which are different on every boot (hints to a read-out-of-bounds on uninitialzed memory or the like):
> serial_mtk serial at 11002000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19 CC 
> 
> At another boot:
> serial_mtk serial at 11002000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19  H H UI  $&L 1.04-OpenWrt-r19423-c9c2b01b84 (Apr 11 2022 - 19:25:34 +0000)
> 
> This is probably related to recent changes in dm and pinctrl, as there haven't been any changes to mtk_serial itself.
> 
> Log including ROM and ARM Trusted Firmware A serial output:
> 
> F0: 102B 0000
> F6: 0000 0000
> V0: 0000 0000 [0001]
> 00: 0000 0000
> BP: 0400 0041 [0000]
> G0: 1190 0000
> T0: 0000 02AD [000F]
> Jump to BL
> 
> NOTICE:  BL2: v2.4(release):OpenWrt v2021-05-08-d2c75b21-2 (mt7622-snand-2ddr)
> NOTICE:  BL2: Built : 12:03:10, Apr 11 2022
> NOTICE:  SPI-NAND: W25N01GV (128MB)
> NOTICE:  BL2: Booting BL31
> NOTICE:  BL31: v2.4(release):OpenWrt v2021-05-08-d2c75b21-2 (mt7622-snand-2ddr)
> NOTICE:  BL31: Built : 12:03:10, Apr 11 2022 serial_mtk serial at 11002000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19 CC  U-Boot 2022.04-OpenWrt-r19423-c9c2b01b84 (Apr 11 2022 - 19:25:34 +0000)
> 
> CPU:   MediaTek MT7622
> Model: mt7622-bpi-r64
> DRAM:  1 GiB
> Core:  55 devices, 18 uclasses, devicetree: separate
> MMC:   mmc at 11230000: 0, mmc at 11240000: 1
> Loading Environment from UBI... SPI-NAND: W25N01GV (128MB) ...
> 
> 
> I will most likely not investigate this any further, but thought it might be good to let you know.
> 
> 
> Best regards
> 
> 
> Daniel