[PATCH] sunxi-nand: fix the PIO instead of DMA implementation

[Miquel Raynal]

Hi Markus,

+ Maxime, for the record :)

mhoffrogge at gmail.com wrote on Thu, 30 Jun 2022 01:26:39 +0200:

> The sunxi nand SPL loader was broken at least for SUN4I,
> SUN5I and SUN7I SOCs since the implementation change
> from DMA to PIO usage - commit 6ddbb1e.
> 
> Root cause for this issue is the NFC control flag NFC_CTL_RAM_METHOD
> being set by method nand_apply_config.
> 
> This flag controls the bus being used for the NFCs internal RAM access.
> It must be set for the DMA use case only.
> See A33_Nand_Flash_Controller_Specification.pdf page 12.
> 
> This fix is tested by myself on a Cubietruck A20 board.
> Others should test it on new generation SOCs as well.

Good to know that someone tackled this, Maxime already reported some
time ago that it was broken for a number of boards but I never took the
time to investigate, apologies.

> Signed-off-by: Markus Hoffrogge <mhoffrogge at gmail.com>
> ---
>  drivers/mtd/nand/raw/sunxi_nand_spl.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/nand/raw/sunxi_nand_spl.c
> b/drivers/mtd/nand/raw/sunxi_nand_spl.c
> index a29a76c58d..6de0b0a355 100644
> --- a/drivers/mtd/nand/raw/sunxi_nand_spl.c
> +++ b/drivers/mtd/nand/raw/sunxi_nand_spl.c
> @@ -208,7 +208,7 @@ static void nand_apply_config(const struct nfc_config
> *conf)
> 
>   val = readl(SUNXI_NFC_BASE + NFC_CTL);
>   val &= ~NFC_CTL_PAGE_SIZE_MASK;
> - writel(val | NFC_CTL_RAM_METHOD | NFC_CTL_PAGE_SIZE(conf->page_size),
> + writel(val | NFC_CTL_PAGE_SIZE(conf->page_size),
>         SUNXI_NFC_BASE + NFC_CTL);
>   writel(conf->ecc_size, SUNXI_NFC_BASE + NFC_CNT);
>   writel(conf->page_size, SUNXI_NFC_BASE + NFC_SPARE_AREA);
> --

Thanks,
Miquèl