[PATCH 20/22] drivers: sunxi: Replace ARCH_SUNXI with BOARD_SUNXI
Samuel Holland
samuel at sholland.org
Tue Nov 1 06:08:32 CET 2022
This provides a unified configuration across all sunxi boards,
regardless of CPU architecture.
Signed-off-by: Samuel Holland <samuel at sholland.org>
---
drivers/clk/sunxi/Kconfig | 2 +-
drivers/fastboot/Kconfig | 13 ++++++-------
drivers/gpio/Kconfig | 2 +-
drivers/mmc/Kconfig | 2 +-
drivers/net/phy/Kconfig | 4 ++--
drivers/phy/allwinner/Kconfig | 2 +-
drivers/pinctrl/sunxi/Kconfig | 2 +-
drivers/reset/Kconfig | 2 +-
drivers/spi/Kconfig | 2 +-
drivers/usb/Kconfig | 2 +-
drivers/usb/gadget/Kconfig | 8 ++++----
drivers/usb/musb-new/Kconfig | 2 +-
drivers/video/Kconfig | 2 +-
drivers/watchdog/Kconfig | 4 ++--
14 files changed, 24 insertions(+), 25 deletions(-)
diff --git a/drivers/clk/sunxi/Kconfig b/drivers/clk/sunxi/Kconfig
index bf11fad6ee..72310e231d 100644
--- a/drivers/clk/sunxi/Kconfig
+++ b/drivers/clk/sunxi/Kconfig
@@ -1,6 +1,6 @@
config CLK_SUNXI
bool "Clock support for Allwinner SoCs"
- depends on CLK && ARCH_SUNXI
+ depends on CLK && BOARD_SUNXI
select DM_RESET
select SPL_DM_RESET if SPL_CLK
default y
diff --git a/drivers/fastboot/Kconfig b/drivers/fastboot/Kconfig
index b97c67bf60..a55fdac370 100644
--- a/drivers/fastboot/Kconfig
+++ b/drivers/fastboot/Kconfig
@@ -8,7 +8,7 @@ config FASTBOOT
config USB_FUNCTION_FASTBOOT
bool "Enable USB fastboot gadget"
depends on USB_GADGET
- default y if ARCH_SUNXI && USB_MUSB_GADGET
+ default y if BOARD_SUNXI && USB_MUSB_GADGET
select FASTBOOT
select USB_GADGET_DOWNLOAD
help
@@ -32,10 +32,9 @@ if FASTBOOT
config FASTBOOT_BUF_ADDR
hex "Define FASTBOOT buffer address"
+ default SYS_LOAD_ADDR if BOARD_SUNXI
default 0x82000000 if MX6SX || MX6SL || MX6UL || MX6SLL
default 0x81000000 if ARCH_OMAP2PLUS
- default 0x42000000 if ARCH_SUNXI && !MACH_SUN9I
- default 0x22000000 if ARCH_SUNXI && MACH_SUN9I
default 0x60800800 if ROCKCHIP_RK3036 || ROCKCHIP_RK3188 || \
ROCKCHIP_RK322X
default 0x800800 if ROCKCHIP_RK3288 || ROCKCHIP_RK3329 || \
@@ -52,7 +51,7 @@ config FASTBOOT_BUF_SIZE
hex "Define FASTBOOT buffer size"
default 0x8000000 if ARCH_ROCKCHIP
default 0x6000000 if ARCH_ZYNQMP
- default 0x2000000 if ARCH_SUNXI
+ default 0x2000000 if BOARD_SUNXI
default 0x8192 if SANDBOX
default 0x7000000
help
@@ -71,7 +70,7 @@ config FASTBOOT_USB_DEV
config FASTBOOT_FLASH
bool "Enable FASTBOOT FLASH command"
- default y if ARCH_SUNXI || ARCH_ROCKCHIP
+ default y if BOARD_SUNXI || ARCH_ROCKCHIP
depends on MMC || (MTD_RAW_NAND && CMD_MTDPARTS)
select IMAGE_SPARSE
help
@@ -105,8 +104,8 @@ config FASTBOOT_FLASH_MMC_DEV
int "Define FASTBOOT MMC FLASH default device"
depends on FASTBOOT_FLASH_MMC
default 0 if ARCH_ROCKCHIP
- default 0 if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA = -1
- default 1 if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA != -1
+ default 0 if BOARD_SUNXI && MMC_SUNXI_SLOT_EXTRA = -1
+ default 1 if BOARD_SUNXI && MMC_SUNXI_SLOT_EXTRA != -1
help
The fastboot "flash" command requires additional information
regarding the non-volatile storage device. Define this to
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index ff87fbfb39..defdb91368 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -363,7 +363,7 @@ config SANDBOX_GPIO_COUNT
config SUNXI_GPIO
bool "Allwinner GPIO driver"
- depends on ARCH_SUNXI
+ depends on BOARD_SUNXI
select SPL_STRTO if SPL
help
Support the GPIO device in Allwinner SoCs.
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 56f42820c7..6a7271de75 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -749,7 +749,7 @@ config ZYNQ_HISPD_BROKEN
config MMC_SUNXI
bool "Allwinner sunxi SD/MMC Host Controller support"
- depends on ARCH_SUNXI
+ depends on BOARD_SUNXI
default y
help
This selects support for the SD/MMC Host Controller on
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 52ce08b3b3..a68298fa08 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -19,14 +19,14 @@ if PHYLIB
config PHY_ADDR_ENABLE
bool "Limit phy address"
- default y if ARCH_SUNXI
+ default y if BOARD_SUNXI
help
Select this if you want to control which phy address is used
if PHY_ADDR_ENABLE
config PHY_ADDR
int "PHY address"
- default 1 if ARCH_SUNXI
+ default 1 if BOARD_SUNXI
default 0
help
The address of PHY on MII bus. Usually in range of 0 to 31.
diff --git a/drivers/phy/allwinner/Kconfig b/drivers/phy/allwinner/Kconfig
index f8f1e99c4f..ab43681f0c 100644
--- a/drivers/phy/allwinner/Kconfig
+++ b/drivers/phy/allwinner/Kconfig
@@ -3,7 +3,7 @@
#
config PHY_SUN4I_USB
bool "Allwinner Sun4I USB PHY driver"
- depends on ARCH_SUNXI
+ depends on BOARD_SUNXI
select DM_REGULATOR
select PHY
help
diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig
index 77da90836b..eb574236a3 100644
--- a/drivers/pinctrl/sunxi/Kconfig
+++ b/drivers/pinctrl/sunxi/Kconfig
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
-if ARCH_SUNXI
+if BOARD_SUNXI
config PINCTRL_SUNXI
select PINCTRL_FULL
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 4cb0ba0850..cb15372306 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -137,7 +137,7 @@ config RESET_MTMIPS
config RESET_SUNXI
bool "RESET support for Allwinner SoCs"
- depends on DM_RESET && ARCH_SUNXI
+ depends on DM_RESET && BOARD_SUNXI
default y
help
This enables support for common reset driver for
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 34b92ceaee..20412e1887 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -442,7 +442,7 @@ config SOFT_SPI
config SPI_SUNXI
bool "Allwinner SoC SPI controllers"
- default ARCH_SUNXI
+ default BOARD_SUNXI
help
Enable the Allwinner SoC SPi controller driver.
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 3afb45d5cc..8c0d4da193 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -116,7 +116,7 @@ config USB_KEYBOARD_FN_KEYS
choice
prompt "USB keyboard polling"
- default SYS_USB_EVENT_POLL_VIA_INT_QUEUE if ARCH_SUNXI
+ default SYS_USB_EVENT_POLL_VIA_INT_QUEUE if BOARD_SUNXI
default SYS_USB_EVENT_POLL
---help---
Enable a polling mechanism for USB keyboard.
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index e8da73c788..19071e003e 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -40,7 +40,7 @@ if USB_GADGET
config USB_GADGET_MANUFACTURER
string "Vendor name of the USB device"
- default "Allwinner Technology" if ARCH_SUNXI
+ default "Allwinner Technology" if BOARD_SUNXI
default "Rockchip" if ARCH_ROCKCHIP
default "U-Boot"
help
@@ -49,7 +49,7 @@ config USB_GADGET_MANUFACTURER
config USB_GADGET_VENDOR_NUM
hex "Vendor ID of the USB device"
- default 0x1f3a if ARCH_SUNXI
+ default 0x1f3a if BOARD_SUNXI
default 0x2207 if ARCH_ROCKCHIP
default 0x0
help
@@ -59,7 +59,7 @@ config USB_GADGET_VENDOR_NUM
config USB_GADGET_PRODUCT_NUM
hex "Product ID of the USB device"
- default 0x1010 if ARCH_SUNXI
+ default 0x1010 if BOARD_SUNXI
default 0x310a if ROCKCHIP_RK3036
default 0x300a if ROCKCHIP_RK3066
default 0x310c if ROCKCHIP_RK3128
@@ -202,7 +202,7 @@ endif # USB_GADGET_DOWNLOAD
config USB_ETHER
bool "USB Ethernet Gadget"
depends on NET
- default y if ARCH_SUNXI && USB_MUSB_GADGET
+ default y if BOARD_SUNXI && USB_MUSB_GADGET
help
Creates an Ethernet network device through a USB peripheral
controller. This will create a network interface on both the device
diff --git a/drivers/usb/musb-new/Kconfig b/drivers/usb/musb-new/Kconfig
index 51f876cd71..d2d86a5c0e 100644
--- a/drivers/usb/musb-new/Kconfig
+++ b/drivers/usb/musb-new/Kconfig
@@ -67,7 +67,7 @@ config USB_MUSB_PIC32
config USB_MUSB_SUNXI
bool "Enable sunxi OTG / DRC USB controller"
- depends on ARCH_SUNXI
+ depends on BOARD_SUNXI
select USB_MUSB_PIO_ONLY
default y
---help---
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index c841b99bb3..4e9e179d12 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -183,7 +183,7 @@ config CONSOLE_TRUETYPE_MAX_METRICS
config SYS_WHITE_ON_BLACK
bool "Display console as white on a black background"
- default y if ARCH_AT91 || ARCH_EXYNOS || ARCH_ROCKCHIP || ARCH_TEGRA || X86 || ARCH_SUNXI
+ default y if ARCH_AT91 || ARCH_EXYNOS || ARCH_ROCKCHIP || ARCH_TEGRA || X86 || BOARD_SUNXI
help
Normally the display is black on a white background, Enable this
option to invert this, i.e. white on a black background. This can be
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index f1b1cf63ca..575dea5da5 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -29,7 +29,7 @@ config WATCHDOG_TIMEOUT_MSECS
default 128000 if ARCH_MX31 || ARCH_MX5 || ARCH_MX6
default 128000 if ARCH_MX7 || ARCH_VF610
default 30000 if ARCH_SOCFPGA
- default 16000 if ARCH_SUNXI
+ default 16000 if BOARD_SUNXI
default 60000
help
Watchdog timeout in msec
@@ -321,7 +321,7 @@ config WDT_STM32MP
config WDT_SUNXI
bool "Allwinner sunxi watchdog timer support"
- depends on WDT && ARCH_SUNXI
+ depends on WDT && BOARD_SUNXI
default y
help
Enable support for the watchdog timer in Allwinner sunxi SoCs.
--
2.37.3
More information about the U-Boot
mailing list