[PATCH v4 5/5] arm: mvebu: Add RD-AC5X board

Stefan Roese sr at denx.de
Wed Nov 2 14:53:14 CET 2022


(stripped-down the Cc list a bit)

On 02.11.22 14:49, Peter Robinson wrote:
> On Wed, Nov 2, 2022 at 1:40 PM Stefan Roese <sr at denx.de> wrote:
>>
>> Hi Chris,
>>
>> On 22.09.22 05:31, Chris Packham wrote:
>>> The RD-AC5X-32G16HVG6HLG-A0 development board main components and
>>> features include:
>>> * Main 12V/54V power supply
>>> * 270 Gbps throughput packet processor on the main board
>>> * DDR4:
>>>     * SR1: 2GB DDR4 2400MT/S(1GB x 2 pcs ) with ECC(1GB x 1 pcs)
>>>     * SR2: 4GB DDR4 2400MT/S(2GB x 2 pcs ) with ECC(2GB x 1 pcs)
>>>     * PCB co-layout with 4GB device to support 8GB (Dual CS) requirement
>>> * 16GB eMMC (Samsung KLMAG1JETD-B041006)
>>> * 16MB SPI NOR(GD25Q127C)
>>> * 32 x 1000 Base-T interfaces
>>> * 16 x 2500 Base-T interfaces
>>>     * SR1: 88E2540*4
>>>     * SR2: 88E2580*1+88E2540*2
>>> * Six (6) x 25G Base-R SFP28 interfaces
>>> * One (1) x RJ-45 console connector, interfacing to the on board UART
>>> * One (1) x USB Type-A connector, interfacing to the USB 2.0 port (0)
>>> * One (1) x USB Type-mini B connector, interfacing to the USB 2.0 port (1)
>>> * One (1) x RJ-45 1G Base-T Management port, interfacing to the host
>>>     port (shared with PCIe) Connected to 88E1512 Gigabit Ethernet Phy
>>> * One (1) x Oculink port, interfacing to the PCIe port for external CPU
>>>     connection
>>> * POE 802.3AT support on Port 1 ~ Port 32, 802.3BT support on Port 33 ~
>>>     Port 48 (Microsemi PD69208T4, PD69208M or TI TPS2388,TPS23881
>>>     solution)
>>> * POE total power budget 780W
>>> * LED interfaces per network port/POE
>>> * LED interfaces (common) showing system status
>>> * PTP TC mode Supported (Reserved M.2 connector to support BC mode)
>>>
>>> Signed-off-by: Chris Packham <judge.packham at gmail.com>
>>> ---
>>>
>>> Changes in v4:
>>> - Move CONFIG_DISPLAY_BOARDINFO_LATE and CONFIG_ENV_OVERWRITE to
>>>     the defconfig.
>>> - Remove CONFIG_BAUDRATE as this is already set in the default config
>>> - Remove CONFIG_USB_MAX_CONTROLLER_COUNT as this is not needed with
>>>     DM_USB
>>> - Remove CONFIG_PREBOOT as we don't have anything to run
>>> - Remove commented out CONFIG_BOARD_EARLY_INIT_R
>>> - Remove DEBUG_UART configuration
>>> - Remove unnecessary console environment variable
>>> - Remove CONFIG_MVEBU_SAR
>>>
>>> Changes in v3:
>>> - Remove MMC and UBIFS distroboot options (MMC driver is not currently
>>>     functional, NAND is not populated on the RD-AC5X board)
>>> - Remove unnecessary Ethernet configuration
>>> - Remove unnecessary NAND configuration
>>> - Remove memory node from dts so the value passed by the DDR FW will be
>>>     used
>>>
>>> Changes in v2:
>>> - Use distro boot by default
>>> - remove unnecessary SPI-NOR partitions
>>>
>>>    arch/arm/dts/Makefile                      |   3 +-
>>>    arch/arm/dts/ac5-98dx35xx-rd.dts           | 129 +++++++++++++++++++++
>>>    arch/arm/mach-mvebu/Kconfig                |   9 +-
>>>    board/Marvell/mvebu_alleycat-5/MAINTAINERS |   6 +
>>>    board/Marvell/mvebu_alleycat-5/Makefile    |   3 +
>>>    board/Marvell/mvebu_alleycat-5/board.c     |  28 +++++
>>>    configs/mvebu_ac5_rd_defconfig             |  84 ++++++++++++++
>>>    include/configs/mvebu_alleycat-5.h         |  42 +++++++
>>>    8 files changed, 302 insertions(+), 2 deletions(-)
>>>    create mode 100644 arch/arm/dts/ac5-98dx35xx-rd.dts
>>>    create mode 100644 board/Marvell/mvebu_alleycat-5/MAINTAINERS
>>>    create mode 100644 board/Marvell/mvebu_alleycat-5/Makefile
>>>    create mode 100644 board/Marvell/mvebu_alleycat-5/board.c
>>>    create mode 100644 configs/mvebu_ac5_rd_defconfig
>>>    create mode 100644 include/configs/mvebu_alleycat-5.h
>>
>> While running a CI build I run into these issues:
>>
>> CONFIG_SYS_TEXT_BASE is now renamed to CONFIG_TEXT_BASE. I've already
>> fixes this locally. But now I also get this compilation error:
>>
>> [stefan at ryzen u-boot-marvell (master)]$ make -sj
>>
>> Device Tree Source (arch/arm/dts/unset.dtb) is not correctly specified.
>> Please define 'CONFIG_DEFAULT_DEVICE_TREE'
>> or build with 'DEVICE_TREE=<device_tree>' argument
>>
>> make[1]: *** [dts/Makefile:34: arch/arm/dts/unset.dtb] Error 1
>> make: *** [Makefile:1162: dts/dt.dtb] Error 2
>>
>> So where is CONFIG_DEFAULT_DEVICE_TREE defined? I might have overlooked
>> this.
> 
> It would normally be a line like the following in configs/mvebu_ac5_rd_defconfig
> CONFIG_DEFAULT_DEVICE_TREE="ac5-98dx35xx-rd"

Right. But I'm wondering how this worked for Chris. He should have
gotten this error as well before submitting this patch.

Thanks,
Stefan

>> Thanks,
>> Stefan
>>
>>> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
>>> index 965895bc2a..57a5272884 100644
>>> --- a/arch/arm/dts/Makefile
>>> +++ b/arch/arm/dts/Makefile
>>> @@ -274,7 +274,8 @@ dtb-$(CONFIG_ARCH_MVEBU) +=                       \
>>>        cn9132-db-A.dtb                         \
>>>        cn9132-db-B.dtb                         \
>>>        cn9130-crb-A.dtb                        \
>>> -     cn9130-crb-B.dtb
>>> +     cn9130-crb-B.dtb                        \
>>> +     ac5-98dx35xx-rd.dtb
>>>    endif
>>>
>>>    dtb-$(CONFIG_ARCH_SYNQUACER) += synquacer-sc2a11-developerbox.dtb
>>> diff --git a/arch/arm/dts/ac5-98dx35xx-rd.dts b/arch/arm/dts/ac5-98dx35xx-rd.dts
>>> new file mode 100644
>>> index 0000000000..d9f217cd4a
>>> --- /dev/null
>>> +++ b/arch/arm/dts/ac5-98dx35xx-rd.dts
>>> @@ -0,0 +1,129 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>> +/*
>>> + * Device Tree For RD-AC5X.
>>> + *
>>> + * Copyright (C) 2021 Marvell
>>> + * Copyright (C) 2022 Allied Telesis Labs
>>> + */
>>> +/*
>>> + * Device Tree file for Marvell Alleycat 5X development board
>>> + * This board file supports the B configuration of the board
>>> + */
>>> +
>>> +/dts-v1/;
>>> +
>>> +#include "ac5-98dx35xx.dtsi"
>>> +
>>> +/ {
>>> +     model = "Marvell RD-AC5X Board";
>>> +     compatible = "marvell,rd-ac5x", "marvell,ac5x", "marvell,ac5";
>>> +
>>> +     aliases {
>>> +             serial0 = &uart0;
>>> +             spiflash0 = &spiflash0;
>>> +             gpio0 = &gpio0;
>>> +             gpio1 = &gpio1;
>>> +             ethernet0 = &eth0;
>>> +             ethernet1 = &eth1;
>>> +             spi0 = &spi0;
>>> +             i2c0 = &i2c0;
>>> +             i2c1 = &i2c1;
>>> +             usb0 = &usb0;
>>> +             usb1 = &usb1;
>>> +             pinctrl0 = &pinctrl0;
>>> +             sar-reg0 = "/config-space/sar-reg";
>>> +     };
>>> +
>>> +     usb1phy: usb-phy {
>>> +             compatible = "usb-nop-xceiv";
>>> +             #phy-cells = <0>;
>>> +     };
>>> +
>>> +     chosen {
>>> +             stdout-path = "serial0:115200n8";
>>> +     };
>>> +};
>>> +
>>> +&uart0 {
>>> +     status = "okay";
>>> +};
>>> +
>>> +&mdio {
>>> +     phy0: ethernet-phy at 0 {
>>> +           reg = <0>;
>>> +     };
>>> +};
>>> +
>>> +&i2c0 {
>>> +     status = "okay";
>>> +};
>>> +
>>> +&i2c1 {
>>> +     status = "okay";
>>> +};
>>> +
>>> +&eth0 {
>>> +     status = "okay";
>>> +     phy-handle = <&phy0>;
>>> +};
>>> +
>>> +/* USB0 is a host USB */
>>> +&usb0 {
>>> +     status = "okay";
>>> +};
>>> +
>>> +/* USB1 is a peripheral USB */
>>> +&usb1 {
>>> +     status = "okay";
>>> +     phys = <&usb1phy>;
>>> +     phy-names = "usb-phy";
>>> +     dr_mode = "peripheral";
>>> +};
>>> +
>>> +&spi0 {
>>> +     status = "okay";
>>> +
>>> +     spiflash0: flash at 0 {
>>> +             compatible = "jedec,spi-nor";
>>> +             spi-max-frequency = <50000000>;
>>> +             spi-tx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */
>>> +             spi-rx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */
>>> +             reg = <0>;
>>> +
>>> +             #address-cells = <1>;
>>> +             #size-cells = <1>;
>>> +     };
>>> +};
>>> +
>>> +&pinctrl0 {
>>> +     /*
>>> +      * MPP Bus:     MPP#     mode#
>>> +      * eMMC          [0-11]   0x1
>>> +      * SPI[0]        [12-17]  0x1
>>> +      * TSEN_INT      [18]     0x1
>>> +      * DEV_INIT      [19]     0x1
>>> +      * SPI[1]        [20-23]  0x3
>>> +      * UART[1]       [24-25]  0x3
>>> +      * I2C[0]        [26-27]  0x1
>>> +      * XSMI[0]       [28-29]  0x1 // SCH use SMI[0], reversed due to CPSS problem
>>> +      * SMI[1]        [30-31]  0x2 // SCH use XSMI[1], reversed due to CPSS problem
>>> +      * UART[0]       [32-33]  0x1
>>> +      * OOB_SMI       [34-35]  0x1
>>> +      * PTP_CLK0_OUT  [36]     0x1
>>> +      * PTP_PULSE_OUT [37]     0x1
>>> +      * RCVR_CLK_OUT  [38]     0x1
>>> +      * GPIO(in/out)  [39]     0x0
>>> +      * GPIO(in/out)  [40]     0x0
>>> +      * PTP_REF_CLK   [41]     0x1
>>> +      * PTP_CLK0      [42]     0x1
>>> +      * LED0_CLK      [43]     0x1
>>> +      * LED0_STB      [44]     0x1
>>> +      * LED0_DATA     [45]     0x1
>>> +      */
>>> +     /*           0    1    2    3    4    5    6    7    8    9 */
>>> +     pin-func = < 1    1    1    1    1    1    1    1    1    1
>>> +                  1    1    1    1    1    1    1    1    1    1
>>> +                  3    3    3    3    3    3    1    1    1    1
>>> +                  2    2    1    1    1    1    1    1    1    0
>>> +                  0    1    1    1    1    1    >;
>>> +};
>>> diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
>>> index 45efa24194..2120cb473f 100644
>>> --- a/arch/arm/mach-mvebu/Kconfig
>>> +++ b/arch/arm/mach-mvebu/Kconfig
>>> @@ -97,7 +97,7 @@ config CUSTOMER_BOARD_SUPPORT
>>>        bool
>>>
>>>    choice
>>> -     prompt "Armada XP/375/38x/3700/7K/8K board select"
>>> +     prompt "Armada XP/375/38x/3700/7K/8K/Alleycat-5 board select"
>>>        optional
>>>
>>>    config TARGET_CLEARFOG
>>> @@ -149,6 +149,10 @@ config TARGET_MVEBU_ARMADA_8K
>>>        select BOARD_LATE_INIT
>>>        imply SCSI
>>>
>>> +config TARGET_MVEBU_ALLEYCAT5
>>> +     bool "Support AlleyCat 5 platforms"
>>> +     select ALLEYCAT_5
>>> +
>>>    config TARGET_OCTEONTX2_CN913x
>>>        bool "Support CN913x platforms"
>>>        select ARMADA_8K
>>> @@ -257,6 +261,7 @@ config SYS_BOARD
>>>        default "x530" if TARGET_X530
>>>        default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG
>>>        default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236
>>> +     default "mvebu_alleycat-5" if TARGET_MVEBU_ALLEYCAT5
>>>
>>>    config SYS_CONFIG_NAME
>>>        default "clearfog" if TARGET_CLEARFOG
>>> @@ -277,6 +282,7 @@ config SYS_CONFIG_NAME
>>>        default "x530" if TARGET_X530
>>>        default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG
>>>        default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236
>>> +     default "mvebu_alleycat-5" if TARGET_MVEBU_ALLEYCAT5
>>>
>>>    config SYS_VENDOR
>>>        default "Marvell" if TARGET_DB_MV784MP_GP
>>> @@ -296,6 +302,7 @@ config SYS_VENDOR
>>>        default "gdsys" if TARGET_CONTROLCENTERDC
>>>        default "alliedtelesis" if TARGET_X530
>>>        default "mikrotik" if TARGET_CRS3XX_98DX3236
>>> +     default "Marvell" if TARGET_MVEBU_ALLEYCAT5
>>>
>>>    config SYS_SOC
>>>        default "mvebu"
>>> diff --git a/board/Marvell/mvebu_alleycat-5/MAINTAINERS b/board/Marvell/mvebu_alleycat-5/MAINTAINERS
>>> new file mode 100644
>>> index 0000000000..480c07c5f0
>>> --- /dev/null
>>> +++ b/board/Marvell/mvebu_alleycat-5/MAINTAINERS
>>> @@ -0,0 +1,6 @@
>>> +RD-AC5X BOARD
>>> +M:   Chris Packham <chris.packham at alliedtelesis.co.nz>
>>> +S:   Maintained
>>> +F:   board/Marvell/mvebu_alleycat-5/
>>> +F:   include/configs/mvebu_alleycat-5.h
>>> +F:   configs/mvebu_ac5_rd_defconfig
>>> diff --git a/board/Marvell/mvebu_alleycat-5/Makefile b/board/Marvell/mvebu_alleycat-5/Makefile
>>> new file mode 100644
>>> index 0000000000..29254b4d64
>>> --- /dev/null
>>> +++ b/board/Marvell/mvebu_alleycat-5/Makefile
>>> @@ -0,0 +1,3 @@
>>> +# SPDX-License-Identifier:   GPL-2.0+
>>> +
>>> +obj-y        := board.o
>>> diff --git a/board/Marvell/mvebu_alleycat-5/board.c b/board/Marvell/mvebu_alleycat-5/board.c
>>> new file mode 100644
>>> index 0000000000..2d46775920
>>> --- /dev/null
>>> +++ b/board/Marvell/mvebu_alleycat-5/board.c
>>> @@ -0,0 +1,28 @@
>>> +// SPDX-License-Identifier: GPL-2.0+
>>> +
>>> +#include <common.h>
>>> +#include <asm/global_data.h>
>>> +
>>> +DECLARE_GLOBAL_DATA_PTR;
>>> +
>>> +int board_early_init_f(void)
>>> +{
>>> +     return 0;
>>> +}
>>> +
>>> +int board_early_init_r(void)
>>> +{
>>> +     return 0;
>>> +}
>>> +
>>> +int board_init(void)
>>> +{
>>> +     gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
>>> +
>>> +     return 0;
>>> +}
>>> +
>>> +int board_late_init(void)
>>> +{
>>> +     return 0;
>>> +}
>>> diff --git a/configs/mvebu_ac5_rd_defconfig b/configs/mvebu_ac5_rd_defconfig
>>> new file mode 100644
>>> index 0000000000..610d628705
>>> --- /dev/null
>>> +++ b/configs/mvebu_ac5_rd_defconfig
>>> @@ -0,0 +1,84 @@
>>> +CONFIG_ARM=y
>>> +CONFIG_ARCH_CPU_INIT=y
>>> +CONFIG_ARCH_MVEBU=y
>>> +CONFIG_SYS_TEXT_BASE=0x200000000
>>> +CONFIG_SYS_MALLOC_LEN=0x900000
>>> +CONFIG_TARGET_MVEBU_ALLEYCAT5=y
>>> +CONFIG_ENV_SIZE=0x10000
>>> +CONFIG_ENV_OFFSET=0x400000
>>> +CONFIG_ENV_SECT_SIZE=0x10000
>>> +CONFIG_DM_GPIO=y
>>> +CONFIG_SYS_LOAD_ADDR=0x202000000
>>> +CONFIG_SYS_MEMTEST_START=0x200800000
>>> +CONFIG_SYS_MEMTEST_END=0x200ffffff
>>> +CONFIG_DISTRO_DEFAULTS=y
>>> +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
>>> +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x200FF0000
>>> +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
>>> +CONFIG_FIT=y
>>> +CONFIG_BOOTDELAY=-1
>>> +CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
>>> +CONFIG_SYS_CONSOLE_INFO_QUIET=y
>>> +CONFIG_DISPLAY_BOARDINFO_LATE=y
>>> +CONFIG_ARCH_EARLY_INIT_R=y
>>> +CONFIG_ARCH_MISC_INIT=y
>>> +CONFIG_BOARD_EARLY_INIT_F=y
>>> +CONFIG_CMD_BOOTZ=y
>>> +CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
>>> +CONFIG_CMD_MEMTEST=y
>>> +# CONFIG_CMD_FLASH is not set
>>> +CONFIG_CMD_GPIO=y
>>> +CONFIG_CMD_I2C=y
>>> +CONFIG_CMD_MMC=y
>>> +CONFIG_CMD_PCI=y
>>> +CONFIG_CMD_SPI=y
>>> +CONFIG_CMD_USB=y
>>> +# CONFIG_CMD_SETEXPR is not set
>>> +CONFIG_CMD_CACHE=y
>>> +CONFIG_CMD_TIME=y
>>> +CONFIG_CMD_MVEBU_BUBT=y
>>> +CONFIG_CMD_REGULATOR=y
>>> +CONFIG_CMD_EXT4_WRITE=y
>>> +CONFIG_CMD_UBI=y
>>> +CONFIG_MAC_PARTITION=y
>>> +CONFIG_OF_EMBED=y
>>> +CONFIG_ENV_OVERWRITE=y
>>> +CONFIG_ENV_IS_IN_SPI_FLASH=y
>>> +CONFIG_CLK=y
>>> +CONFIG_CLK_MVEBU=y
>>> +CONFIG_DM_PCA953X=y
>>> +CONFIG_DM_I2C=y
>>> +CONFIG_SYS_I2C_MVTWSI=y
>>> +CONFIG_MISC=y
>>> +CONFIG_MMC_SDHCI=y
>>> +CONFIG_MMC_SDHCI_XENON=y
>>> +CONFIG_MTD=y
>>> +CONFIG_SPI_FLASH_GIGADEVICE=y
>>> +CONFIG_SPI_FLASH_MACRONIX=y
>>> +CONFIG_SPI_FLASH_SPANSION=y
>>> +CONFIG_SPI_FLASH_STMICRO=y
>>> +CONFIG_PHY_MARVELL=y
>>> +CONFIG_PHY_GIGE=y
>>> +CONFIG_E1000=y
>>> +CONFIG_MVNETA=y
>>> +CONFIG_MVMDIO=y
>>> +CONFIG_PCI=y
>>> +CONFIG_PHY=y
>>> +CONFIG_PINCTRL=y
>>> +CONFIG_PINCTRL_ARMADA_8K=y
>>> +CONFIG_DM_REGULATOR_FIXED=y
>>> +CONFIG_DM_REGULATOR_GPIO=y
>>> +CONFIG_DM_RTC=y
>>> +CONFIG_DM_SCSI=y
>>> +CONFIG_SYS_NS16550=y
>>> +CONFIG_MVEBU_A3700_SPI=y
>>> +CONFIG_DM_THERMAL=y
>>> +CONFIG_USB=y
>>> +CONFIG_USB_XHCI_HCD=y
>>> +CONFIG_USB_EHCI_HCD=y
>>> +CONFIG_USB_HOST_ETHER=y
>>> +CONFIG_USB_ETHER_ASIX=y
>>> +CONFIG_USB_ETHER_ASIX88179=y
>>> +CONFIG_USB_ETHER_MCS7830=y
>>> +CONFIG_USB_ETHER_RTL8152=y
>>> +CONFIG_USB_ETHER_SMSC95XX=y
>>> diff --git a/include/configs/mvebu_alleycat-5.h b/include/configs/mvebu_alleycat-5.h
>>> new file mode 100644
>>> index 0000000000..41bdfae6c3
>>> --- /dev/null
>>> +++ b/include/configs/mvebu_alleycat-5.h
>>> @@ -0,0 +1,42 @@
>>> +/* SPDX-License-Identifier: GPL-2.0+ */
>>> +/*
>>> + * Copyright (C) 2018 Marvell International Ltd
>>> + */
>>> +
>>> +#ifndef _CONFIG_MVEBU_ALLEYCAY_5_H
>>> +#define _CONFIG_MVEBU_ALLEYCAY_5_H
>>> +
>>> +#include <asm/arch/soc.h>
>>> +
>>> +/* additions for new ARM relocation support */
>>> +#define CONFIG_SYS_SDRAM_BASE   0x200000000
>>> +
>>> +#define CONFIG_SYS_BAUDRATE_TABLE   { 9600, 19200, 38400, 57600, \
>>> +                                   115200, 230400, 460800, 921600 }
>>> +
>>> +/* Default Env vars */
>>> +#define CONFIG_IPADDR           0.0.0.0 /* In order to cause an error */
>>> +#define CONFIG_SERVERIP         0.0.0.0 /* In order to cause an error */
>>> +#define CONFIG_NETMASK          255.255.255.0
>>> +#define CONFIG_GATEWAYIP        0.0.0.0
>>> +#define CONFIG_ROOTPATH                 "/srv/nfs/" /* Default Dir for NFS */
>>> +
>>> +#define BOOT_TARGET_DEVICES(func) \
>>> +     func(USB, usb, 0) \
>>> +     func(DHCP, dhcp, na)
>>> +
>>> +#include <config_distro_bootcmd.h>
>>> +
>>> +#define CONFIG_EXTRA_ENV_SETTINGS   \
>>> +     BOOTENV \
>>> +     "kernel_addr_r=0x202000000\0" \
>>> +     "fdt_addr_r=0x201000000\0"    \
>>> +     "ramdisk_addr_r=0x206000000\0"    \
>>> +     "fdtfile=marvell/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0"
>>> +
>>> +/*
>>> + * High Level Configuration Options (easy to change)
>>> + */
>>> +#define CONFIG_SYS_TCLK     325000000
>>> +
>>> +#endif /* _CONFIG_MVEBU_ALLEYCAY_5_H */
>>
>> Viele Grüße,
>> Stefan Roese
>>
>> --
>> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
>> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>> Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de

Viele Grüße,
Stefan Roese

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de


More information about the U-Boot mailing list