[PATCH 2/2] ARM: dts: stm32: Drop MMCI interrupt-names

Yann Gautier yann.gautier at foss.st.com
Wed Nov 2 14:53:49 CET 2022


From: Marek Vasut <marex at denx.de>

The pl18x MMCI driver does not use the interrupt-names property,
the binding document has been updated to recommend this property
be unused, remove it.
Backport of Marek's Linux patch:
https://lore.kernel.org/linux-arm-kernel/20221013221242.218808-3-marex@denx.de/

Reviewed-by: Linus Walleij <linus.walleij at linaro.org>
Reviewed-by: Yann Gautier <yann.gautier at foss.st.com>
Signed-off-by: Marek Vasut <marex at denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue at foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier at foss.st.com>
---

 arch/arm/dts/stm32h743.dtsi  | 2 --
 arch/arm/dts/stm32mp131.dtsi | 2 --
 arch/arm/dts/stm32mp151.dtsi | 3 ---
 3 files changed, 7 deletions(-)

diff --git a/arch/arm/dts/stm32h743.dtsi b/arch/arm/dts/stm32h743.dtsi
index ceb629c4fa..c490d0a571 100644
--- a/arch/arm/dts/stm32h743.dtsi
+++ b/arch/arm/dts/stm32h743.dtsi
@@ -339,7 +339,6 @@
 			arm,primecell-periphid = <0x10153180>;
 			reg = <0x52007000 0x1000>;
 			interrupts = <49>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC1_CK>;
 			clock-names = "apb_pclk";
 			resets = <&rcc STM32H7_AHB3_RESET(SDMMC1)>;
@@ -353,7 +352,6 @@
 			arm,primecell-periphid = <0x10153180>;
 			reg = <0x48022400 0x400>;
 			interrupts = <124>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC2_CK>;
 			clock-names = "apb_pclk";
 			resets = <&rcc STM32H7_AHB2_RESET(SDMMC2)>;
diff --git a/arch/arm/dts/stm32mp131.dtsi b/arch/arm/dts/stm32mp131.dtsi
index a1c6d0d00b..661d329b45 100644
--- a/arch/arm/dts/stm32mp131.dtsi
+++ b/arch/arm/dts/stm32mp131.dtsi
@@ -231,7 +231,6 @@
 			arm,primecell-periphid = <0x20253180>;
 			reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
 			clocks = <&clk_pll4_p>;
 			clock-names = "apb_pclk";
 			cap-sd-highspeed;
@@ -245,7 +244,6 @@
 			arm,primecell-periphid = <0x20253180>;
 			reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
 			clocks = <&clk_pll4_p>;
 			clock-names = "apb_pclk";
 			cap-sd-highspeed;
diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi
index f0fb022fc6..8bbb1aef2e 100644
--- a/arch/arm/dts/stm32mp151.dtsi
+++ b/arch/arm/dts/stm32mp151.dtsi
@@ -1102,7 +1102,6 @@
 			arm,primecell-periphid = <0x00253180>;
 			reg = <0x48004000 0x400>;
 			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC3_K>;
 			clock-names = "apb_pclk";
 			resets = <&rcc SDMMC3_R>;
@@ -1435,7 +1434,6 @@
 			arm,primecell-periphid = <0x00253180>;
 			reg = <0x58005000 0x1000>;
 			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC1_K>;
 			clock-names = "apb_pclk";
 			resets = <&rcc SDMMC1_R>;
@@ -1450,7 +1448,6 @@
 			arm,primecell-periphid = <0x00253180>;
 			reg = <0x58007000 0x1000>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC2_K>;
 			clock-names = "apb_pclk";
 			resets = <&rcc SDMMC2_R>;
-- 
2.25.1



More information about the U-Boot mailing list