[PATCH v1 2/6] clk: microchip: mpfs: convert parent rate acquistion to get_get_rate()

Conor Dooley conor at kernel.org
Wed Nov 2 17:41:59 CET 2022


On Wed, Nov 02, 2022 at 01:20:33PM +0000, Padmarao.Begari at microchip.com wrote:
> Hi Conor,
> 
> > On Tue, 2022-10-25 at 08:58 +0100, Conor Dooley wrote:
> > Currently the clock driver for PolarFire SoC takes a very naive
> > approach
> > to the relationship between clocks. It reads the dt to get an input
> > clock, assumes that that is fixed frequency, reads the "clock-
> s/that that/that

Nope, not a typo ;)

> 
> > frequency"
> > property & uses that to set up both the "cfg" and "periph" clocks.
> > 
> > Simplifying for the sake of incremental fixes, the "correct"
> > parentage for
> > the clocks currently supported in U-Boot is that the "cfg" clocks
> > should
> > be children of the fixed frequency clock in the dt. The AHB clock is
> > one
> > of these "cfg" clocks and is the parent of the "periph" clocks.
> > 
> > Instead of passing the clock rate of the fixed-frequency clock to the
> > "cfg" and "periph" registration functions and the name of the
> > parents,
> > pass their actual parents & use clk_get_rate() to determine their
> > parents
> > rates.
> > 
> > The "periph" clocks are purely gate clocks and should not be reading
> > the
> > AHB clocks registers to determine their rates, as they can simply
> > report
> > the output of clk_get_rate() on their parent.
> > 
> > Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
> > ---
> >  drivers/clk/microchip/Makefile          |  2 +-
> >  drivers/clk/microchip/mpfs_clk.c        | 18 ++++++++----------
> >  drivers/clk/microchip/mpfs_clk.h        | 12 ++++--------
> >  drivers/clk/microchip/mpfs_clk_cfg.c    |  7 +++----
> >  drivers/clk/microchip/mpfs_clk_periph.c | 16 ++++------------
> >  5 files changed, 20 insertions(+), 35 deletions(-)
> > 
> > diff --git a/drivers/clk/microchip/Makefile
> > b/drivers/clk/microchip/Makefile
> > index 904b345d75..329b2c0c93 100644
> > --- a/drivers/clk/microchip/Makefile
> > +++ b/drivers/clk/microchip/Makefile
> > @@ -1 +1 @@
> > -obj-y += mpfs_clk.o mpfs_clk_cfg.o mpfs_clk_periph.o
> > +obj-y += mpfs_clk.o mpfs_clk_cfg.o mpfs_clk_periph.o
> > mpfs_clk_msspll.o
> > diff --git a/drivers/clk/microchip/mpfs_clk.c
> > b/drivers/clk/microchip/mpfs_clk.c
> > index 67828c9bf4..7ba1218b56 100644
> > --- a/drivers/clk/microchip/mpfs_clk.c
> > +++ b/drivers/clk/microchip/mpfs_clk.c
> > @@ -11,34 +11,32 @@
> >  #include <dm/device.h>
> >  #include <dm/devres.h>
> >  #include <dm/uclass.h>
> > +#include <dt-bindings/clock/microchip-mpfs-clock.h>
> >  #include <linux/err.h>
> >  
> >  #include "mpfs_clk.h"
> >  
> >  static int mpfs_clk_probe(struct udevice *dev)
> >  {
> > -	int ret;
> > +	struct clk *parent_clk = dev_get_priv(dev);
> > +	struct clk clk_ahb = { .id = CLK_AHB };
> The peripheral clock updated code added in this patch but removed it in
> the patch 4, you can update only related code in this patch instead of
> removing it later.

Right. I did that intentionally so that each patch did the minimum
required to fix individual issues. This patch does some reorganisation
so that the follow up patches were only as minimal fixes as possible.
I'll reorganise things if you think that's the better way to go about it
though.

> 
> Other than that:
> Reviewed-by: Padmarao Begari <padmarao.begari at microchip.com>
> 
> >  	void __iomem *base;
> > -	u32 clk_rate;
> > -	const char *parent_clk_name;
> > -	struct clk *clk = dev_get_priv(dev);
> > +	int ret;
> >  
> >  	base = dev_read_addr_ptr(dev);
> >  	if (!base)
> >  		return -EINVAL;
> >  
> > -	ret = clk_get_by_index(dev, 0, clk);
> > +	ret = clk_get_by_index(dev, 0, parent_clk);
> >  	if (ret)
> >  		return ret;
> >  
> > -	dev_read_u32(clk->dev, "clock-frequency", &clk_rate);
> > -	parent_clk_name = clk->dev->name;
> > -
> > -	ret = mpfs_clk_register_cfgs(base, clk_rate, parent_clk_name);
> > +	ret = mpfs_clk_register_cfgs(base, parent_clk);
> >  	if (ret)
> >  		return ret;
> >  
> > -	ret = mpfs_clk_register_periphs(base, clk_rate, "clk_ahb");
> > +	clk_request(dev, &clk_ahb);
> > +	ret = mpfs_clk_register_periphs(base, &clk_ahb);
> >  
> >  	return ret;
> >  }
> > diff --git a/drivers/clk/microchip/mpfs_clk.h
> > b/drivers/clk/microchip/mpfs_clk.h
> > index 442562a5e7..35cfeac92e 100644
> > --- a/drivers/clk/microchip/mpfs_clk.h
> > +++ b/drivers/clk/microchip/mpfs_clk.h
> > @@ -11,22 +11,18 @@
> >   * mpfs_clk_register_cfgs() - register configuration clocks
> >   *
> >   * @base: base address of the mpfs system register.
> > - * @clk_rate: the mpfs pll clock rate.
> > - * @parent_name: a pointer to parent clock name.
> > + * @parent: a pointer to parent clock.
> >   * Return: zero on success, or a negative error code.
> >   */
> > -int mpfs_clk_register_cfgs(void __iomem *base, u32 clk_rate,
> > -			   const char *parent_name);
> > +int mpfs_clk_register_cfgs(void __iomem *base, struct clk *parent);
> >  /**
> >   * mpfs_clk_register_periphs() - register peripheral clocks
> >   *
> >   * @base: base address of the mpfs system register.
> > - * @clk_rate: the mpfs pll clock rate.
> > - * @parent_name: a pointer to parent clock name.
> > + * @parent: a pointer to parent clock.
> >   * Return: zero on success, or a negative error code.
> >   */
> > -int mpfs_clk_register_periphs(void __iomem *base, u32 clk_rate,
> > -			      const char *parent_name);
> > +int mpfs_clk_register_periphs(void __iomem *base, struct clk
> > *parent);
> >  /**
> >   * divider_get_val() - get the clock divider value
> >   *
> > diff --git a/drivers/clk/microchip/mpfs_clk_cfg.c
> > b/drivers/clk/microchip/mpfs_clk_cfg.c
> > index fefddd1413..5739fd66e8 100644
> > --- a/drivers/clk/microchip/mpfs_clk_cfg.c
> > +++ b/drivers/clk/microchip/mpfs_clk_cfg.c
> > @@ -117,8 +117,7 @@ static struct mpfs_cfg_hw_clock mpfs_cfg_clks[] =
> > {
> >  	CLK_CFG(CLK_AHB, "clk_ahb", 4, 2, mpfs_div_ahb_table, 0),
> >  };
> >  
> > -int mpfs_clk_register_cfgs(void __iomem *base, u32 clk_rate,
> > -			   const char *parent_name)
> > +int mpfs_clk_register_cfgs(void __iomem *base, struct clk *parent)
> >  {
> >  	int ret;
> >  	int i, id, num_clks;
> > @@ -129,9 +128,9 @@ int mpfs_clk_register_cfgs(void __iomem *base,
> > u32 clk_rate,
> >  	for (i = 0; i < num_clks; i++) {
> >  		hw = &mpfs_cfg_clks[i].hw;
> >  		mpfs_cfg_clks[i].sys_base = base;
> > -		mpfs_cfg_clks[i].prate = clk_rate;
> > +		mpfs_cfg_clks[i].prate = clk_get_rate(parent);
> >  		name = mpfs_cfg_clks[i].cfg.name;
> > -		ret = clk_register(hw, MPFS_CFG_CLOCK, name,
> > parent_name);
> > +		ret = clk_register(hw, MPFS_CFG_CLOCK, name, parent-
> > >dev->name);
> >  		if (ret)
> >  			ERR_PTR(ret);
> >  		id = mpfs_cfg_clks[i].cfg.id;
> > diff --git a/drivers/clk/microchip/mpfs_clk_periph.c
> > b/drivers/clk/microchip/mpfs_clk_periph.c
> > index 61d90eb4a8..1488ef503e 100644
> > --- a/drivers/clk/microchip/mpfs_clk_periph.c
> > +++ b/drivers/clk/microchip/mpfs_clk_periph.c
> > @@ -99,16 +99,9 @@ static int mpfs_periph_clk_disable(struct clk *hw)
> >  static ulong mpfs_periph_clk_recalc_rate(struct clk *hw)
> >  {
> >  	struct mpfs_periph_hw_clock *periph_hw =
> > to_mpfs_periph_clk(hw);
> > -	void __iomem *base_addr = periph_hw->sys_base;
> > -	unsigned long rate;
> > -	u32 val;
> >  
> > -	val = readl(base_addr + REG_CLOCK_CONFIG_CR) >> CFG_AHB_SHIFT;
> > -	val &= clk_div_mask(CFG_WIDTH);
> > -	rate = periph_hw->prate / (1u << val);
> > -	hw->rate = rate;
> > +	return periph_hw->prate;
> >  
> > -	return rate;
> >  }
> >  
> >  #define CLK_PERIPH(_id, _name, _shift, _flags) {	\
> > @@ -150,8 +143,7 @@ static struct mpfs_periph_hw_clock
> > mpfs_periph_clks[] = {
> >  	CLK_PERIPH(CLK_CFM, "clk_periph_cfm", 29, 0),
> >  };
> >  
> > -int mpfs_clk_register_periphs(void __iomem *base, u32 clk_rate,
> > -			      const char *parent_name)
> > +int mpfs_clk_register_periphs(void __iomem *base, struct clk
> > *parent)
> >  {
> >  	int ret;
> >  	int i, id, num_clks;
> > @@ -162,9 +154,9 @@ int mpfs_clk_register_periphs(void __iomem *base,
> > u32 clk_rate,
> >  	for (i = 0; i < num_clks; i++)  {
> >  		hw = &mpfs_periph_clks[i].hw;
> >  		mpfs_periph_clks[i].sys_base = base;
> > -		mpfs_periph_clks[i].prate = clk_rate;
> > +		mpfs_periph_clks[i].prate = clk_get_rate(parent);
> >  		name = mpfs_periph_clks[i].periph.name;
> > -		ret = clk_register(hw, MPFS_PERIPH_CLOCK, name,
> > parent_name);
> > +		ret = clk_register(hw, MPFS_PERIPH_CLOCK, name, parent-
> > >dev->name);
> >  		if (ret)
> >  			ERR_PTR(ret);
> >  		id = mpfs_periph_clks[i].periph.id;


More information about the U-Boot mailing list