[PATCH v4 5/5] arm: mvebu: Add RD-AC5X board
Chris Packham
judge.packham at gmail.com
Thu Nov 3 02:01:27 CET 2022
On Thu, Nov 3, 2022 at 9:29 AM Chris Packham <judge.packham at gmail.com> wrote:
>
> On Thu, Nov 3, 2022 at 2:40 AM Stefan Roese <sr at denx.de> wrote:
> >
> > Hi Chris,
> >
> > On 22.09.22 05:31, Chris Packham wrote:
> > > The RD-AC5X-32G16HVG6HLG-A0 development board main components and
> > > features include:
> > > * Main 12V/54V power supply
> > > * 270 Gbps throughput packet processor on the main board
> > > * DDR4:
> > > * SR1: 2GB DDR4 2400MT/S(1GB x 2 pcs ) with ECC(1GB x 1 pcs)
> > > * SR2: 4GB DDR4 2400MT/S(2GB x 2 pcs ) with ECC(2GB x 1 pcs)
> > > * PCB co-layout with 4GB device to support 8GB (Dual CS) requirement
> > > * 16GB eMMC (Samsung KLMAG1JETD-B041006)
> > > * 16MB SPI NOR(GD25Q127C)
> > > * 32 x 1000 Base-T interfaces
> > > * 16 x 2500 Base-T interfaces
> > > * SR1: 88E2540*4
> > > * SR2: 88E2580*1+88E2540*2
> > > * Six (6) x 25G Base-R SFP28 interfaces
> > > * One (1) x RJ-45 console connector, interfacing to the on board UART
> > > * One (1) x USB Type-A connector, interfacing to the USB 2.0 port (0)
> > > * One (1) x USB Type-mini B connector, interfacing to the USB 2.0 port (1)
> > > * One (1) x RJ-45 1G Base-T Management port, interfacing to the host
> > > port (shared with PCIe) Connected to 88E1512 Gigabit Ethernet Phy
> > > * One (1) x Oculink port, interfacing to the PCIe port for external CPU
> > > connection
> > > * POE 802.3AT support on Port 1 ~ Port 32, 802.3BT support on Port 33 ~
> > > Port 48 (Microsemi PD69208T4, PD69208M or TI TPS2388,TPS23881
> > > solution)
> > > * POE total power budget 780W
> > > * LED interfaces per network port/POE
> > > * LED interfaces (common) showing system status
> > > * PTP TC mode Supported (Reserved M.2 connector to support BC mode)
> > >
> > > Signed-off-by: Chris Packham <judge.packham at gmail.com>
> > > ---
> > >
> > > Changes in v4:
> > > - Move CONFIG_DISPLAY_BOARDINFO_LATE and CONFIG_ENV_OVERWRITE to
> > > the defconfig.
> > > - Remove CONFIG_BAUDRATE as this is already set in the default config
> > > - Remove CONFIG_USB_MAX_CONTROLLER_COUNT as this is not needed with
> > > DM_USB
> > > - Remove CONFIG_PREBOOT as we don't have anything to run
> > > - Remove commented out CONFIG_BOARD_EARLY_INIT_R
> > > - Remove DEBUG_UART configuration
> > > - Remove unnecessary console environment variable
> > > - Remove CONFIG_MVEBU_SAR
> > >
> > > Changes in v3:
> > > - Remove MMC and UBIFS distroboot options (MMC driver is not currently
> > > functional, NAND is not populated on the RD-AC5X board)
> > > - Remove unnecessary Ethernet configuration
> > > - Remove unnecessary NAND configuration
> > > - Remove memory node from dts so the value passed by the DDR FW will be
> > > used
> > >
> > > Changes in v2:
> > > - Use distro boot by default
> > > - remove unnecessary SPI-NOR partitions
> > >
> > > arch/arm/dts/Makefile | 3 +-
> > > arch/arm/dts/ac5-98dx35xx-rd.dts | 129 +++++++++++++++++++++
> > > arch/arm/mach-mvebu/Kconfig | 9 +-
> > > board/Marvell/mvebu_alleycat-5/MAINTAINERS | 6 +
> > > board/Marvell/mvebu_alleycat-5/Makefile | 3 +
> > > board/Marvell/mvebu_alleycat-5/board.c | 28 +++++
> > > configs/mvebu_ac5_rd_defconfig | 84 ++++++++++++++
> > > include/configs/mvebu_alleycat-5.h | 42 +++++++
> > > 8 files changed, 302 insertions(+), 2 deletions(-)
> > > create mode 100644 arch/arm/dts/ac5-98dx35xx-rd.dts
> > > create mode 100644 board/Marvell/mvebu_alleycat-5/MAINTAINERS
> > > create mode 100644 board/Marvell/mvebu_alleycat-5/Makefile
> > > create mode 100644 board/Marvell/mvebu_alleycat-5/board.c
> > > create mode 100644 configs/mvebu_ac5_rd_defconfig
> > > create mode 100644 include/configs/mvebu_alleycat-5.h
> >
> > While running a CI build I run into these issues:
> >
> > CONFIG_SYS_TEXT_BASE is now renamed to CONFIG_TEXT_BASE. I've already
> > fixes this locally. But now I also get this compilation error:
> >
> > [stefan at ryzen u-boot-marvell (master)]$ make -sj
> >
> > Device Tree Source (arch/arm/dts/unset.dtb) is not correctly specified.
> > Please define 'CONFIG_DEFAULT_DEVICE_TREE'
> > or build with 'DEVICE_TREE=<device_tree>' argument
> >
> > make[1]: *** [dts/Makefile:34: arch/arm/dts/unset.dtb] Error 1
> > make: *** [Makefile:1162: dts/dt.dtb] Error 2
> >
> > So where is CONFIG_DEFAULT_DEVICE_TREE defined? I might have overlooked
> > this.
> >
>
> Ah. Because these arm64 SoCs need other components in the "bootloader"
> I've been using a meta build system that passes DEVICE_TREE= on the
> make command line. I'll rebase the series and add fixup
> CONFIG_TEXT_BASE/CONFIG_DEFAULT_DEVICE_TREE.
>
Darn, after rebasing I get
U-Boot 2022.10-01006-g566e5cb656-dirty (Nov 03 2022 - 00:19:33 +0000)
SoC: Alleycat5X 98DX3530M-A1
Clock: CPU 1500 MHz
DDR 1200 MHz
FABRIC 0 MHz
MSS 200 MHz
Model: Marvell RD-AC5X Board
DRAM: 2 GiB
Core: 25 devices, 16 uclasses, devicetree: separate
Could not initialize timer (err -19)
Could not initialize timer (err -19)
which I think is related to some recent changes requiring timer
configuration. I'm sure I can dig into the required change but has
anyone got any quick pointers of where to look?
> > Thanks,
> > Stefan
> >
> > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> > > index 965895bc2a..57a5272884 100644
> > > --- a/arch/arm/dts/Makefile
> > > +++ b/arch/arm/dts/Makefile
> > > @@ -274,7 +274,8 @@ dtb-$(CONFIG_ARCH_MVEBU) += \
> > > cn9132-db-A.dtb \
> > > cn9132-db-B.dtb \
> > > cn9130-crb-A.dtb \
> > > - cn9130-crb-B.dtb
> > > + cn9130-crb-B.dtb \
> > > + ac5-98dx35xx-rd.dtb
> > > endif
> > >
> > > dtb-$(CONFIG_ARCH_SYNQUACER) += synquacer-sc2a11-developerbox.dtb
> > > diff --git a/arch/arm/dts/ac5-98dx35xx-rd.dts b/arch/arm/dts/ac5-98dx35xx-rd.dts
> > > new file mode 100644
> > > index 0000000000..d9f217cd4a
> > > --- /dev/null
> > > +++ b/arch/arm/dts/ac5-98dx35xx-rd.dts
> > > @@ -0,0 +1,129 @@
> > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > > +/*
> > > + * Device Tree For RD-AC5X.
> > > + *
> > > + * Copyright (C) 2021 Marvell
> > > + * Copyright (C) 2022 Allied Telesis Labs
> > > + */
> > > +/*
> > > + * Device Tree file for Marvell Alleycat 5X development board
> > > + * This board file supports the B configuration of the board
> > > + */
> > > +
> > > +/dts-v1/;
> > > +
> > > +#include "ac5-98dx35xx.dtsi"
> > > +
> > > +/ {
> > > + model = "Marvell RD-AC5X Board";
> > > + compatible = "marvell,rd-ac5x", "marvell,ac5x", "marvell,ac5";
> > > +
> > > + aliases {
> > > + serial0 = &uart0;
> > > + spiflash0 = &spiflash0;
> > > + gpio0 = &gpio0;
> > > + gpio1 = &gpio1;
> > > + ethernet0 = ð0;
> > > + ethernet1 = ð1;
> > > + spi0 = &spi0;
> > > + i2c0 = &i2c0;
> > > + i2c1 = &i2c1;
> > > + usb0 = &usb0;
> > > + usb1 = &usb1;
> > > + pinctrl0 = &pinctrl0;
> > > + sar-reg0 = "/config-space/sar-reg";
> > > + };
> > > +
> > > + usb1phy: usb-phy {
> > > + compatible = "usb-nop-xceiv";
> > > + #phy-cells = <0>;
> > > + };
> > > +
> > > + chosen {
> > > + stdout-path = "serial0:115200n8";
> > > + };
> > > +};
> > > +
> > > +&uart0 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&mdio {
> > > + phy0: ethernet-phy at 0 {
> > > + reg = <0>;
> > > + };
> > > +};
> > > +
> > > +&i2c0 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&i2c1 {
> > > + status = "okay";
> > > +};
> > > +
> > > +ð0 {
> > > + status = "okay";
> > > + phy-handle = <&phy0>;
> > > +};
> > > +
> > > +/* USB0 is a host USB */
> > > +&usb0 {
> > > + status = "okay";
> > > +};
> > > +
> > > +/* USB1 is a peripheral USB */
> > > +&usb1 {
> > > + status = "okay";
> > > + phys = <&usb1phy>;
> > > + phy-names = "usb-phy";
> > > + dr_mode = "peripheral";
> > > +};
> > > +
> > > +&spi0 {
> > > + status = "okay";
> > > +
> > > + spiflash0: flash at 0 {
> > > + compatible = "jedec,spi-nor";
> > > + spi-max-frequency = <50000000>;
> > > + spi-tx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */
> > > + spi-rx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */
> > > + reg = <0>;
> > > +
> > > + #address-cells = <1>;
> > > + #size-cells = <1>;
> > > + };
> > > +};
> > > +
> > > +&pinctrl0 {
> > > + /*
> > > + * MPP Bus: MPP# mode#
> > > + * eMMC [0-11] 0x1
> > > + * SPI[0] [12-17] 0x1
> > > + * TSEN_INT [18] 0x1
> > > + * DEV_INIT [19] 0x1
> > > + * SPI[1] [20-23] 0x3
> > > + * UART[1] [24-25] 0x3
> > > + * I2C[0] [26-27] 0x1
> > > + * XSMI[0] [28-29] 0x1 // SCH use SMI[0], reversed due to CPSS problem
> > > + * SMI[1] [30-31] 0x2 // SCH use XSMI[1], reversed due to CPSS problem
> > > + * UART[0] [32-33] 0x1
> > > + * OOB_SMI [34-35] 0x1
> > > + * PTP_CLK0_OUT [36] 0x1
> > > + * PTP_PULSE_OUT [37] 0x1
> > > + * RCVR_CLK_OUT [38] 0x1
> > > + * GPIO(in/out) [39] 0x0
> > > + * GPIO(in/out) [40] 0x0
> > > + * PTP_REF_CLK [41] 0x1
> > > + * PTP_CLK0 [42] 0x1
> > > + * LED0_CLK [43] 0x1
> > > + * LED0_STB [44] 0x1
> > > + * LED0_DATA [45] 0x1
> > > + */
> > > + /* 0 1 2 3 4 5 6 7 8 9 */
> > > + pin-func = < 1 1 1 1 1 1 1 1 1 1
> > > + 1 1 1 1 1 1 1 1 1 1
> > > + 3 3 3 3 3 3 1 1 1 1
> > > + 2 2 1 1 1 1 1 1 1 0
> > > + 0 1 1 1 1 1 >;
> > > +};
> > > diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
> > > index 45efa24194..2120cb473f 100644
> > > --- a/arch/arm/mach-mvebu/Kconfig
> > > +++ b/arch/arm/mach-mvebu/Kconfig
> > > @@ -97,7 +97,7 @@ config CUSTOMER_BOARD_SUPPORT
> > > bool
> > >
> > > choice
> > > - prompt "Armada XP/375/38x/3700/7K/8K board select"
> > > + prompt "Armada XP/375/38x/3700/7K/8K/Alleycat-5 board select"
> > > optional
> > >
> > > config TARGET_CLEARFOG
> > > @@ -149,6 +149,10 @@ config TARGET_MVEBU_ARMADA_8K
> > > select BOARD_LATE_INIT
> > > imply SCSI
> > >
> > > +config TARGET_MVEBU_ALLEYCAT5
> > > + bool "Support AlleyCat 5 platforms"
> > > + select ALLEYCAT_5
> > > +
> > > config TARGET_OCTEONTX2_CN913x
> > > bool "Support CN913x platforms"
> > > select ARMADA_8K
> > > @@ -257,6 +261,7 @@ config SYS_BOARD
> > > default "x530" if TARGET_X530
> > > default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG
> > > default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236
> > > + default "mvebu_alleycat-5" if TARGET_MVEBU_ALLEYCAT5
> > >
> > > config SYS_CONFIG_NAME
> > > default "clearfog" if TARGET_CLEARFOG
> > > @@ -277,6 +282,7 @@ config SYS_CONFIG_NAME
> > > default "x530" if TARGET_X530
> > > default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG
> > > default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236
> > > + default "mvebu_alleycat-5" if TARGET_MVEBU_ALLEYCAT5
> > >
> > > config SYS_VENDOR
> > > default "Marvell" if TARGET_DB_MV784MP_GP
> > > @@ -296,6 +302,7 @@ config SYS_VENDOR
> > > default "gdsys" if TARGET_CONTROLCENTERDC
> > > default "alliedtelesis" if TARGET_X530
> > > default "mikrotik" if TARGET_CRS3XX_98DX3236
> > > + default "Marvell" if TARGET_MVEBU_ALLEYCAT5
> > >
> > > config SYS_SOC
> > > default "mvebu"
> > > diff --git a/board/Marvell/mvebu_alleycat-5/MAINTAINERS b/board/Marvell/mvebu_alleycat-5/MAINTAINERS
> > > new file mode 100644
> > > index 0000000000..480c07c5f0
> > > --- /dev/null
> > > +++ b/board/Marvell/mvebu_alleycat-5/MAINTAINERS
> > > @@ -0,0 +1,6 @@
> > > +RD-AC5X BOARD
> > > +M: Chris Packham <chris.packham at alliedtelesis.co.nz>
> > > +S: Maintained
> > > +F: board/Marvell/mvebu_alleycat-5/
> > > +F: include/configs/mvebu_alleycat-5.h
> > > +F: configs/mvebu_ac5_rd_defconfig
> > > diff --git a/board/Marvell/mvebu_alleycat-5/Makefile b/board/Marvell/mvebu_alleycat-5/Makefile
> > > new file mode 100644
> > > index 0000000000..29254b4d64
> > > --- /dev/null
> > > +++ b/board/Marvell/mvebu_alleycat-5/Makefile
> > > @@ -0,0 +1,3 @@
> > > +# SPDX-License-Identifier: GPL-2.0+
> > > +
> > > +obj-y := board.o
> > > diff --git a/board/Marvell/mvebu_alleycat-5/board.c b/board/Marvell/mvebu_alleycat-5/board.c
> > > new file mode 100644
> > > index 0000000000..2d46775920
> > > --- /dev/null
> > > +++ b/board/Marvell/mvebu_alleycat-5/board.c
> > > @@ -0,0 +1,28 @@
> > > +// SPDX-License-Identifier: GPL-2.0+
> > > +
> > > +#include <common.h>
> > > +#include <asm/global_data.h>
> > > +
> > > +DECLARE_GLOBAL_DATA_PTR;
> > > +
> > > +int board_early_init_f(void)
> > > +{
> > > + return 0;
> > > +}
> > > +
> > > +int board_early_init_r(void)
> > > +{
> > > + return 0;
> > > +}
> > > +
> > > +int board_init(void)
> > > +{
> > > + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +int board_late_init(void)
> > > +{
> > > + return 0;
> > > +}
> > > diff --git a/configs/mvebu_ac5_rd_defconfig b/configs/mvebu_ac5_rd_defconfig
> > > new file mode 100644
> > > index 0000000000..610d628705
> > > --- /dev/null
> > > +++ b/configs/mvebu_ac5_rd_defconfig
> > > @@ -0,0 +1,84 @@
> > > +CONFIG_ARM=y
> > > +CONFIG_ARCH_CPU_INIT=y
> > > +CONFIG_ARCH_MVEBU=y
> > > +CONFIG_SYS_TEXT_BASE=0x200000000
> > > +CONFIG_SYS_MALLOC_LEN=0x900000
> > > +CONFIG_TARGET_MVEBU_ALLEYCAT5=y
> > > +CONFIG_ENV_SIZE=0x10000
> > > +CONFIG_ENV_OFFSET=0x400000
> > > +CONFIG_ENV_SECT_SIZE=0x10000
> > > +CONFIG_DM_GPIO=y
> > > +CONFIG_SYS_LOAD_ADDR=0x202000000
> > > +CONFIG_SYS_MEMTEST_START=0x200800000
> > > +CONFIG_SYS_MEMTEST_END=0x200ffffff
> > > +CONFIG_DISTRO_DEFAULTS=y
> > > +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> > > +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x200FF0000
> > > +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> > > +CONFIG_FIT=y
> > > +CONFIG_BOOTDELAY=-1
> > > +CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
> > > +CONFIG_SYS_CONSOLE_INFO_QUIET=y
> > > +CONFIG_DISPLAY_BOARDINFO_LATE=y
> > > +CONFIG_ARCH_EARLY_INIT_R=y
> > > +CONFIG_ARCH_MISC_INIT=y
> > > +CONFIG_BOARD_EARLY_INIT_F=y
> > > +CONFIG_CMD_BOOTZ=y
> > > +CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
> > > +CONFIG_CMD_MEMTEST=y
> > > +# CONFIG_CMD_FLASH is not set
> > > +CONFIG_CMD_GPIO=y
> > > +CONFIG_CMD_I2C=y
> > > +CONFIG_CMD_MMC=y
> > > +CONFIG_CMD_PCI=y
> > > +CONFIG_CMD_SPI=y
> > > +CONFIG_CMD_USB=y
> > > +# CONFIG_CMD_SETEXPR is not set
> > > +CONFIG_CMD_CACHE=y
> > > +CONFIG_CMD_TIME=y
> > > +CONFIG_CMD_MVEBU_BUBT=y
> > > +CONFIG_CMD_REGULATOR=y
> > > +CONFIG_CMD_EXT4_WRITE=y
> > > +CONFIG_CMD_UBI=y
> > > +CONFIG_MAC_PARTITION=y
> > > +CONFIG_OF_EMBED=y
> > > +CONFIG_ENV_OVERWRITE=y
> > > +CONFIG_ENV_IS_IN_SPI_FLASH=y
> > > +CONFIG_CLK=y
> > > +CONFIG_CLK_MVEBU=y
> > > +CONFIG_DM_PCA953X=y
> > > +CONFIG_DM_I2C=y
> > > +CONFIG_SYS_I2C_MVTWSI=y
> > > +CONFIG_MISC=y
> > > +CONFIG_MMC_SDHCI=y
> > > +CONFIG_MMC_SDHCI_XENON=y
> > > +CONFIG_MTD=y
> > > +CONFIG_SPI_FLASH_GIGADEVICE=y
> > > +CONFIG_SPI_FLASH_MACRONIX=y
> > > +CONFIG_SPI_FLASH_SPANSION=y
> > > +CONFIG_SPI_FLASH_STMICRO=y
> > > +CONFIG_PHY_MARVELL=y
> > > +CONFIG_PHY_GIGE=y
> > > +CONFIG_E1000=y
> > > +CONFIG_MVNETA=y
> > > +CONFIG_MVMDIO=y
> > > +CONFIG_PCI=y
> > > +CONFIG_PHY=y
> > > +CONFIG_PINCTRL=y
> > > +CONFIG_PINCTRL_ARMADA_8K=y
> > > +CONFIG_DM_REGULATOR_FIXED=y
> > > +CONFIG_DM_REGULATOR_GPIO=y
> > > +CONFIG_DM_RTC=y
> > > +CONFIG_DM_SCSI=y
> > > +CONFIG_SYS_NS16550=y
> > > +CONFIG_MVEBU_A3700_SPI=y
> > > +CONFIG_DM_THERMAL=y
> > > +CONFIG_USB=y
> > > +CONFIG_USB_XHCI_HCD=y
> > > +CONFIG_USB_EHCI_HCD=y
> > > +CONFIG_USB_HOST_ETHER=y
> > > +CONFIG_USB_ETHER_ASIX=y
> > > +CONFIG_USB_ETHER_ASIX88179=y
> > > +CONFIG_USB_ETHER_MCS7830=y
> > > +CONFIG_USB_ETHER_RTL8152=y
> > > +CONFIG_USB_ETHER_SMSC95XX=y
> > > diff --git a/include/configs/mvebu_alleycat-5.h b/include/configs/mvebu_alleycat-5.h
> > > new file mode 100644
> > > index 0000000000..41bdfae6c3
> > > --- /dev/null
> > > +++ b/include/configs/mvebu_alleycat-5.h
> > > @@ -0,0 +1,42 @@
> > > +/* SPDX-License-Identifier: GPL-2.0+ */
> > > +/*
> > > + * Copyright (C) 2018 Marvell International Ltd
> > > + */
> > > +
> > > +#ifndef _CONFIG_MVEBU_ALLEYCAY_5_H
> > > +#define _CONFIG_MVEBU_ALLEYCAY_5_H
> > > +
> > > +#include <asm/arch/soc.h>
> > > +
> > > +/* additions for new ARM relocation support */
> > > +#define CONFIG_SYS_SDRAM_BASE 0x200000000
> > > +
> > > +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
> > > + 115200, 230400, 460800, 921600 }
> > > +
> > > +/* Default Env vars */
> > > +#define CONFIG_IPADDR 0.0.0.0 /* In order to cause an error */
> > > +#define CONFIG_SERVERIP 0.0.0.0 /* In order to cause an error */
> > > +#define CONFIG_NETMASK 255.255.255.0
> > > +#define CONFIG_GATEWAYIP 0.0.0.0
> > > +#define CONFIG_ROOTPATH "/srv/nfs/" /* Default Dir for NFS */
> > > +
> > > +#define BOOT_TARGET_DEVICES(func) \
> > > + func(USB, usb, 0) \
> > > + func(DHCP, dhcp, na)
> > > +
> > > +#include <config_distro_bootcmd.h>
> > > +
> > > +#define CONFIG_EXTRA_ENV_SETTINGS \
> > > + BOOTENV \
> > > + "kernel_addr_r=0x202000000\0" \
> > > + "fdt_addr_r=0x201000000\0" \
> > > + "ramdisk_addr_r=0x206000000\0" \
> > > + "fdtfile=marvell/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0"
> > > +
> > > +/*
> > > + * High Level Configuration Options (easy to change)
> > > + */
> > > +#define CONFIG_SYS_TCLK 325000000
> > > +
> > > +#endif /* _CONFIG_MVEBU_ALLEYCAY_5_H */
> >
> > Viele Grüße,
> > Stefan Roese
> >
> > --
> > DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> > Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
More information about the U-Boot
mailing list