DM_SERIAL for i.MX6 Hummingboard/Cubox-i

[Baruch Siach]

Hi u-boot list,

I am trying to migrate the Hummingboard platform to DM_SERIAL. See below
what I got so far. Booting this on top of master (as of commit
8bc87a4c5) shows nothing on the serial console. Next thing I plan to try
is toggle GPIOs in entry code to see how far the code proceeds.

Any idea where to look before I go down that way?

Thanks,
baruch

diff --git a/arch/arm/dts/imx6qdl-hummingboard2-emmc-som-v15-u-boot.dtsi b/arch/arm/dts/imx6qdl-hummingboard2-emmc-som-v15-u-boot.dtsi
index 400b885e4370..8507b818d4cf 100644
--- a/arch/arm/dts/imx6qdl-hummingboard2-emmc-som-v15-u-boot.dtsi
+++ b/arch/arm/dts/imx6qdl-hummingboard2-emmc-som-v15-u-boot.dtsi
@@ -15,6 +15,10 @@
 	};
 };
 
+&uart1 {
+	u-boot,dm-pre-reloc;
+};
+
 &gpio2 {
 	u-boot,dm-pre-reloc;
 };
diff --git a/configs/mx6cuboxi_defconfig b/configs/mx6cuboxi_defconfig
index 9de5e77c75ad..a29e973eccce 100644
--- a/configs/mx6cuboxi_defconfig
+++ b/configs/mx6cuboxi_defconfig
@@ -46,7 +46,6 @@ CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_LIST="imx6dl-hummingboard2-emmc-som-v15 imx6q-hummingboard2-emmc-som-v15"
 CONFIG_MULTI_DTB_FIT=y
-CONFIG_SPL_OF_PLATDATA=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
@@ -68,6 +67,8 @@ CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
 CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
 CONFIG_DM_THERMAL=y
 CONFIG_IMX_THERMAL=y


-- 
                                                     ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -