[PATCH V3 08/13] iot2050: Add CONFIG_ENV_FLAGS_LIST_STATIC

Jan Kiszka jan.kiszka at siemens.com
Fri Nov 4 12:23:55 CET 2022


From: Jan Kiszka <jan.kiszka at siemens.com>

Will be needed when CONFIG_ENV_WRITEABLE_LIST is enabled. The listed
variables shall remain writable, for informational purposes - they have
to be considered untrusted because the persistent U-Boot env is not
protected.

Signed-off-by: Jan Kiszka <jan.kiszka at siemens.com>
---
 include/configs/iot2050.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/include/configs/iot2050.h b/include/configs/iot2050.h
index dc4b5f90595..d2cba5acfdd 100644
--- a/include/configs/iot2050.h
+++ b/include/configs/iot2050.h
@@ -56,4 +56,12 @@
 
 #include <configs/ti_armv7_common.h>
 
+#ifdef CONFIG_ENV_WRITEABLE_LIST
+/* relevant for secure boot with CONFIG_ENV_WRITEABLE_LIST=y */
+#define CONFIG_ENV_FLAGS_LIST_STATIC					\
+	"board_uuid:sw,board_name:sw,board_serial:sw,board_a5e:sw,"	\
+	"mlfb:sw,fw_version:sw,seboot_version:sw,"			\
+	"eth1addr:mw,eth2addr:mw,watchdog_timeout_ms:dw,boot_targets:sw"
+#endif
+
 #endif /* __CONFIG_IOT2050_H */
-- 
2.35.3



More information about the U-Boot mailing list