[PATCH 0/8] Introduce initial TI's am62a support

[Tom Rini]

On Fri, Nov 04, 2022 at 11:49:39AM +0000, Peter Robinson wrote:
> Hi Bryan,
> 
> > This series will introduce basic support (SD and UART) support for Texas
> > Instruments AM62Ax SK EVM.
> >
> > The am62ax shares many of the same features as the am62x however it uses
> > a new 32bit controller and therefore depends on the patch I sent last
> > week updating the macros used by the k3-ddrss ram driver[0].
> >
> > Here is some proof of life & more documentation if you're interested :)
> >
> > Bootlog:https://paste.sr.ht/~bryanb/e0a418ba7dd452749d2dd1efb5e91b2875a01708
> > Technical Reference Manual:https://www.ti.com/lit/zip/spruj16
> > Schematics:https://www.ti.com/lit/zip/sprr459
> 
> Does this board need a readme for how to build the firmware, these
> days there generally needs to be ATF and probably a slew of other
> firmwares linked into a FIT image or similar to build the entire
> firmware bundle, a readme would likely be a useful addition for people
> getting started if there's not a generic TI 64 bit build doc, and if
> there is that likely needs an update to include this SoC/board. I
> didn't see anything that looked like that in the file list below.

Agreed, something under doc/board/ti/ is needed as well for the series,
thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20221104/f7f75ff6/attachment.sig>