[PATCH v6 2/8] imx: imx8qm: cgtqmx8: switch to binman

Oliver Graute oliver.graute at kococonnector.com
Fri Nov 4 16:03:38 CET 2022


Switch to use binman to pack images

Signed-off-by: Oliver Graute <oliver.graute at kococonnector.com>
Reviewed-by: Fabio Estevam <festevam at denx.de>
Reviewed-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Peng Fan <peng.fan at nxp.com>

---
Changes for v6
 - added CONFIG_SPL_BINMAN_UBOOT_SYMBOLS is not set

Changes for v5
 - added CONFIG_FIT_EXTERNAL_OFFSET

Changes for v4
 - rebased on master

Changes for v3
 -added Reviewed-by
 - rebased on master

 arch/arm/dts/imx8qm-cgtqmx8.dts     | 1 +
 arch/arm/mach-imx/imx8/Kconfig      | 1 +
 board/congatec/cgtqmx8/imximage.cfg | 4 ++--
 configs/cgtqmx8_defconfig           | 4 +++-
 doc/board/congatec/cgtqmx8.rst      | 3 +--
 5 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/arch/arm/dts/imx8qm-cgtqmx8.dts b/arch/arm/dts/imx8qm-cgtqmx8.dts
index 555c357f6f..919d00644f 100644
--- a/arch/arm/dts/imx8qm-cgtqmx8.dts
+++ b/arch/arm/dts/imx8qm-cgtqmx8.dts
@@ -12,6 +12,7 @@
 /memreserve/ 0x80000000 0x00020000;
 
 #include "fsl-imx8qm.dtsi"
+#include "imx8qm-u-boot.dtsi"
 
 / {
 	model = "Congatec QMX8 Qseven series";
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index a7e3af57dc..d423cf8563 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -76,6 +76,7 @@ config TARGET_IMX8QM_MEK
 
 config TARGET_CONGA_QMX8
 	bool "Support congatec conga-QMX8 board"
+	select BINMAN
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
 	select IMX8QM
diff --git a/board/congatec/cgtqmx8/imximage.cfg b/board/congatec/cgtqmx8/imximage.cfg
index 5ecde0c530..43035088e3 100644
--- a/board/congatec/cgtqmx8/imximage.cfg
+++ b/board/congatec/cgtqmx8/imximage.cfg
@@ -4,8 +4,8 @@
  */
 
 
-/* Boot from SD, sector size 0x400 */
-BOOT_FROM SD 0x400
+BOOT_FROM	sd
+
 /* SoC type IMX8QM */
 SOC_TYPE IMX8QM
 /* Append seco container image */
diff --git a/configs/cgtqmx8_defconfig b/configs/cgtqmx8_defconfig
index ddc65a06b9..4d1dfe4212 100644
--- a/configs/cgtqmx8_defconfig
+++ b/configs/cgtqmx8_defconfig
@@ -20,8 +20,10 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
+# CONFIG_SPL_BINMAN_UBOOT_SYMBOLS is not set
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTCOMMAND=y
diff --git a/doc/board/congatec/cgtqmx8.rst b/doc/board/congatec/cgtqmx8.rst
index bccdef2f16..16711a844d 100644
--- a/doc/board/congatec/cgtqmx8.rst
+++ b/doc/board/congatec/cgtqmx8.rst
@@ -57,8 +57,7 @@ Build U-Boot
      $ export ATF_LOAD_ADDR=0x80000000
      $ export BL33_LOAD_ADDR=0x80020000
      $ make cgtqmx8_defconfig
-     $ make u-boot.bin
-     $ make flash.bin
+     $ make
 
 Flash the binary into the SD card
 ---------------------------------
-- 
2.17.1



More information about the U-Boot mailing list