[PATCH v2 4/8] imx: imx8qm: imx8qm_mek switch to binman

Oliver Graute oliver.graute at kococonnector.com
Fri Nov 4 16:03:40 CET 2022


Switch to use binman to pack images

Signed-off-by: Oliver Graute <oliver.graute at kococonnector.com>
---
 arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi | 2 ++
 arch/arm/mach-imx/imx8/Kconfig          | 1 +
 board/freescale/imx8qm_mek/README       | 2 +-
 configs/imx8qm_mek_defconfig            | 2 ++
 4 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi b/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
index a95209e141..eefdccf992 100644
--- a/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
+++ b/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
@@ -3,6 +3,8 @@
  * Copyright 2018, 2021 NXP
  */
 
+#include "imx8qm-u-boot.dtsi"
+
 &{/imx8qm-pm} {
 
 	u-boot,dm-spl;
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index 23a7fcf361..4ccbabf506 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -68,6 +68,7 @@ config TARGET_GIEDI
 
 config TARGET_IMX8QM_MEK
 	bool "Support i.MX8QM MEK board"
+	select BINMAN
 	select BOARD_LATE_INIT
 	select IMX8QM
 	select FSL_CAAM
diff --git a/board/freescale/imx8qm_mek/README b/board/freescale/imx8qm_mek/README
index 570ed7e210..b1a4c6cc82 100644
--- a/board/freescale/imx8qm_mek/README
+++ b/board/freescale/imx8qm_mek/README
@@ -40,7 +40,7 @@ And copy the following firmwares to U-Boot folder:
 Build U-Boot
 ============
 $ make imx8qm_mek_defconfig
-$ make flash.bin
+$ make
 
 Flash the binary into the SD card
 =================================
diff --git a/configs/imx8qm_mek_defconfig b/configs/imx8qm_mek_defconfig
index b973b809be..25b51cf1ec 100644
--- a/configs/imx8qm_mek_defconfig
+++ b/configs/imx8qm_mek_defconfig
@@ -23,6 +23,8 @@ CONFIG_SYS_LOAD_ADDR=0x80280000
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
 CONFIG_REMAKE_ELF=y
+CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_BOOTDELAY=3
-- 
2.17.1



More information about the U-Boot mailing list