[PATCH v6 6/6] arm: mvebu: Add RD-AC5X board

Chris Packham judge.packham at gmail.com
Sat Nov 5 05:24:00 CET 2022


The RD-AC5X-32G16HVG6HLG-A0 development board main components and
features include:
* Main 12V/54V power supply
* 270 Gbps throughput packet processor on the main board
* DDR4:
  * SR1: 2GB DDR4 2400MT/S(1GB x 2 pcs ) with ECC(1GB x 1 pcs)
  * SR2: 4GB DDR4 2400MT/S(2GB x 2 pcs ) with ECC(2GB x 1 pcs)
  * PCB co-layout with 4GB device to support 8GB (Dual CS) requirement
* 16GB eMMC (Samsung KLMAG1JETD-B041006)
* 16MB SPI NOR(GD25Q127C)
* 32 x 1000 Base-T interfaces
* 16 x 2500 Base-T interfaces
  * SR1: 88E2540*4
  * SR2: 88E2580*1+88E2540*2
* Six (6) x 25G Base-R SFP28 interfaces
* One (1) x RJ-45 console connector, interfacing to the on board UART
* One (1) x USB Type-A connector, interfacing to the USB 2.0 port (0)
* One (1) x USB Type-mini B connector, interfacing to the USB 2.0 port (1)
* One (1) x RJ-45 1G Base-T Management port, interfacing to the host
  port (shared with PCIe) Connected to 88E1512 Gigabit Ethernet Phy
* One (1) x Oculink port, interfacing to the PCIe port for external CPU
  connection
* POE 802.3AT support on Port 1 ~ Port 32, 802.3BT support on Port 33 ~
  Port 48 (Microsemi PD69208T4, PD69208M or TI TPS2388,TPS23881
  solution)
* POE total power budget 780W
* LED interfaces per network port/POE
* LED interfaces (common) showing system status
* PTP TC mode Supported (Reserved M.2 connector to support BC mode)

Signed-off-by: Chris Packham <judge.packham at gmail.com>
---

Changes in v6:
- Set CONFIG_DEFAULT_DEVICE_TREE and CONFIG_TEXT_BASE

Changes in v5:
- Remove unused bpard_{early,late}_init{,_r,_f} functions
- Remove CPNFIG_PCI and CONFIG_E1000 as the PCI interface is not
  currently working (requires more vendor code)
- Use CONFIG_OF_SEPARATE instead of CONFIG_OF_EMBED

Changes in v4:
- Move CONFIG_DISPLAY_BOARDINFO_LATE and CONFIG_ENV_OVERWRITE to
  the defconfig.
- Remove CONFIG_BAUDRATE as this is already set in the default config
- Remove CONFIG_USB_MAX_CONTROLLER_COUNT as this is not needed with
  DM_USB
- Remove CONFIG_PREBOOT as we don't have anything to run
- Remove commented out CONFIG_BOARD_EARLY_INIT_R
- Remove DEBUG_UART configuration
- Remove unnecessary console environment variable
- Remove CONFIG_MVEBU_SAR

Changes in v3:
- Remove MMC and UBIFS distroboot options (MMC driver is not currently
  functional, NAND is not populated on the RD-AC5X board)
- Remove unnecessary Ethernet configuration
- Remove unnecessary NAND configuration
- Remove memory node from dts so the value passed by the DDR FW will be
  used

Changes in v2:
- Use distro boot by default
- remove unnecessary SPI-NOR partitions

 arch/arm/dts/Makefile                      |   3 +-
 arch/arm/dts/ac5-98dx35xx-rd.dts           | 129 +++++++++++++++++++++
 arch/arm/mach-mvebu/Kconfig                |   9 +-
 board/Marvell/mvebu_alleycat-5/MAINTAINERS |   6 +
 board/Marvell/mvebu_alleycat-5/Makefile    |   3 +
 board/Marvell/mvebu_alleycat-5/board.c     |  13 +++
 configs/mvebu_ac5_rd_defconfig             |  81 +++++++++++++
 include/configs/mvebu_alleycat-5.h         |  42 +++++++
 8 files changed, 284 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/dts/ac5-98dx35xx-rd.dts
 create mode 100644 board/Marvell/mvebu_alleycat-5/MAINTAINERS
 create mode 100644 board/Marvell/mvebu_alleycat-5/Makefile
 create mode 100644 board/Marvell/mvebu_alleycat-5/board.c
 create mode 100644 configs/mvebu_ac5_rd_defconfig
 create mode 100644 include/configs/mvebu_alleycat-5.h

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 791838733c..b52077cddc 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -278,7 +278,8 @@ dtb-$(CONFIG_ARCH_MVEBU) +=			\
 	cn9132-db-A.dtb				\
 	cn9132-db-B.dtb				\
 	cn9130-crb-A.dtb			\
-	cn9130-crb-B.dtb
+	cn9130-crb-B.dtb			\
+	ac5-98dx35xx-rd.dtb
 endif
 
 dtb-$(CONFIG_ARCH_SYNQUACER) += synquacer-sc2a11-developerbox.dtb
diff --git a/arch/arm/dts/ac5-98dx35xx-rd.dts b/arch/arm/dts/ac5-98dx35xx-rd.dts
new file mode 100644
index 0000000000..d9f217cd4a
--- /dev/null
+++ b/arch/arm/dts/ac5-98dx35xx-rd.dts
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree For RD-AC5X.
+ *
+ * Copyright (C) 2021 Marvell
+ * Copyright (C) 2022 Allied Telesis Labs
+ */
+/*
+ * Device Tree file for Marvell Alleycat 5X development board
+ * This board file supports the B configuration of the board
+ */
+
+/dts-v1/;
+
+#include "ac5-98dx35xx.dtsi"
+
+/ {
+	model = "Marvell RD-AC5X Board";
+	compatible = "marvell,rd-ac5x", "marvell,ac5x", "marvell,ac5";
+
+	aliases {
+		serial0 = &uart0;
+		spiflash0 = &spiflash0;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		spi0 = &spi0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		pinctrl0 = &pinctrl0;
+		sar-reg0 = "/config-space/sar-reg";
+	};
+
+	usb1phy: usb-phy {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&mdio {
+	phy0: ethernet-phy at 0 {
+	      reg = <0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+	phy-handle = <&phy0>;
+};
+
+/* USB0 is a host USB */
+&usb0 {
+	status = "okay";
+};
+
+/* USB1 is a peripheral USB */
+&usb1 {
+	status = "okay";
+	phys = <&usb1phy>;
+	phy-names = "usb-phy";
+	dr_mode = "peripheral";
+};
+
+&spi0 {
+	status = "okay";
+
+	spiflash0: flash at 0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */
+		spi-rx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */
+		reg = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&pinctrl0 {
+	/*
+	 * MPP Bus:     MPP#     mode#
+	 * eMMC          [0-11]   0x1
+	 * SPI[0]        [12-17]  0x1
+	 * TSEN_INT      [18]     0x1
+	 * DEV_INIT      [19]     0x1
+	 * SPI[1]        [20-23]  0x3
+	 * UART[1]       [24-25]  0x3
+	 * I2C[0]        [26-27]  0x1
+	 * XSMI[0]       [28-29]  0x1 // SCH use SMI[0], reversed due to CPSS problem
+	 * SMI[1]        [30-31]  0x2 // SCH use XSMI[1], reversed due to CPSS problem
+	 * UART[0]       [32-33]  0x1
+	 * OOB_SMI       [34-35]  0x1
+	 * PTP_CLK0_OUT  [36]     0x1
+	 * PTP_PULSE_OUT [37]     0x1
+	 * RCVR_CLK_OUT  [38]     0x1
+	 * GPIO(in/out)  [39]     0x0
+	 * GPIO(in/out)  [40]     0x0
+	 * PTP_REF_CLK   [41]     0x1
+	 * PTP_CLK0      [42]     0x1
+	 * LED0_CLK      [43]     0x1
+	 * LED0_STB      [44]     0x1
+	 * LED0_DATA     [45]     0x1
+	 */
+	/*	     0    1    2    3    4    5    6    7    8    9 */
+	pin-func = < 1    1    1    1    1    1    1    1    1    1
+		     1    1    1    1    1    1    1    1    1    1
+		     3    3    3    3    3    3    1    1    1    1
+		     2    2    1    1    1    1    1    1    1    0
+		     0    1    1    1    1    1    >;
+};
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index e2c98dffe2..594e9a03d9 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -98,7 +98,7 @@ config CUSTOMER_BOARD_SUPPORT
 	bool
 
 choice
-	prompt "Armada XP/375/38x/3700/7K/8K board select"
+	prompt "Armada XP/375/38x/3700/7K/8K/Alleycat-5 board select"
 	optional
 
 config TARGET_CLEARFOG
@@ -150,6 +150,10 @@ config TARGET_MVEBU_ARMADA_8K
 	select BOARD_LATE_INIT
 	imply SCSI
 
+config TARGET_MVEBU_ALLEYCAT5
+	bool "Support AlleyCat 5 platforms"
+	select ALLEYCAT_5
+
 config TARGET_OCTEONTX2_CN913x
 	bool "Support CN913x platforms"
 	select ARMADA_8K
@@ -258,6 +262,7 @@ config SYS_BOARD
 	default "x530" if TARGET_X530
 	default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG
 	default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236
+	default "mvebu_alleycat-5" if TARGET_MVEBU_ALLEYCAT5
 
 config SYS_CONFIG_NAME
 	default "clearfog" if TARGET_CLEARFOG
@@ -278,6 +283,7 @@ config SYS_CONFIG_NAME
 	default "x530" if TARGET_X530
 	default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG
 	default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236
+	default "mvebu_alleycat-5" if TARGET_MVEBU_ALLEYCAT5
 
 config SYS_VENDOR
 	default "Marvell" if TARGET_DB_MV784MP_GP
@@ -297,6 +303,7 @@ config SYS_VENDOR
 	default "gdsys" if TARGET_CONTROLCENTERDC
 	default "alliedtelesis" if TARGET_X530
 	default "mikrotik" if TARGET_CRS3XX_98DX3236
+	default "Marvell" if TARGET_MVEBU_ALLEYCAT5
 
 config SYS_SOC
 	default "mvebu"
diff --git a/board/Marvell/mvebu_alleycat-5/MAINTAINERS b/board/Marvell/mvebu_alleycat-5/MAINTAINERS
new file mode 100644
index 0000000000..480c07c5f0
--- /dev/null
+++ b/board/Marvell/mvebu_alleycat-5/MAINTAINERS
@@ -0,0 +1,6 @@
+RD-AC5X BOARD
+M:	Chris Packham <chris.packham at alliedtelesis.co.nz>
+S:	Maintained
+F:	board/Marvell/mvebu_alleycat-5/
+F:	include/configs/mvebu_alleycat-5.h
+F:	configs/mvebu_ac5_rd_defconfig
diff --git a/board/Marvell/mvebu_alleycat-5/Makefile b/board/Marvell/mvebu_alleycat-5/Makefile
new file mode 100644
index 0000000000..29254b4d64
--- /dev/null
+++ b/board/Marvell/mvebu_alleycat-5/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier:	GPL-2.0+
+
+obj-y	:= board.o
diff --git a/board/Marvell/mvebu_alleycat-5/board.c b/board/Marvell/mvebu_alleycat-5/board.c
new file mode 100644
index 0000000000..619cd6c6cd
--- /dev/null
+++ b/board/Marvell/mvebu_alleycat-5/board.c
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <common.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+	return 0;
+}
diff --git a/configs/mvebu_ac5_rd_defconfig b/configs/mvebu_ac5_rd_defconfig
new file mode 100644
index 0000000000..9235a398c5
--- /dev/null
+++ b/configs/mvebu_ac5_rd_defconfig
@@ -0,0 +1,81 @@
+CONFIG_ARM=y
+CONFIG_ARCH_CPU_INIT=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_TEXT_BASE=0x200000000
+CONFIG_SYS_MALLOC_LEN=0x900000
+CONFIG_TARGET_MVEBU_ALLEYCAT5=y
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_OFFSET=0x400000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="ac5-98dx35xx-rd"
+CONFIG_SYS_LOAD_ADDR=0x202000000
+CONFIG_SYS_MEMTEST_START=0x200800000
+CONFIG_SYS_MEMTEST_END=0x200ffffff
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x200FF0000
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_FIT=y
+CONFIG_BOOTDELAY=-1
+CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_ARCH_EARLY_INIT_R=y
+CONFIG_ARCH_MISC_INIT=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
+CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_MVEBU_BUBT=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_UBI=y
+CONFIG_MAC_PARTITION=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_CLK=y
+CONFIG_CLK_MVEBU=y
+CONFIG_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_MISC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_XENON=y
+CONFIG_MTD=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHY_MARVELL=y
+CONFIG_PHY_GIGE=y
+CONFIG_MVNETA=y
+CONFIG_MVMDIO=y
+CONFIG_PHY=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_ARMADA_8K=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_RTC=y
+CONFIG_DM_SCSI=y
+CONFIG_SYS_NS16550=y
+CONFIG_MVEBU_A3700_SPI=y
+CONFIG_DM_THERMAL=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
diff --git a/include/configs/mvebu_alleycat-5.h b/include/configs/mvebu_alleycat-5.h
new file mode 100644
index 0000000000..41bdfae6c3
--- /dev/null
+++ b/include/configs/mvebu_alleycat-5.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Marvell International Ltd
+ */
+
+#ifndef _CONFIG_MVEBU_ALLEYCAY_5_H
+#define _CONFIG_MVEBU_ALLEYCAY_5_H
+
+#include <asm/arch/soc.h>
+
+/* additions for new ARM relocation support */
+#define CONFIG_SYS_SDRAM_BASE   0x200000000
+
+#define CONFIG_SYS_BAUDRATE_TABLE   { 9600, 19200, 38400, 57600, \
+				      115200, 230400, 460800, 921600 }
+
+/* Default Env vars */
+#define CONFIG_IPADDR           0.0.0.0 /* In order to cause an error */
+#define CONFIG_SERVERIP         0.0.0.0 /* In order to cause an error */
+#define CONFIG_NETMASK          255.255.255.0
+#define CONFIG_GATEWAYIP        0.0.0.0
+#define CONFIG_ROOTPATH                 "/srv/nfs/" /* Default Dir for NFS */
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(USB, usb, 0) \
+	func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+
+#define CONFIG_EXTRA_ENV_SETTINGS   \
+	BOOTENV \
+	"kernel_addr_r=0x202000000\0" \
+	"fdt_addr_r=0x201000000\0"    \
+	"ramdisk_addr_r=0x206000000\0"    \
+	"fdtfile=marvell/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0"
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_SYS_TCLK     325000000
+
+#endif /* _CONFIG_MVEBU_ALLEYCAY_5_H */
-- 
2.38.1



More information about the U-Boot mailing list