[RFC PATCH 1/2] Revert "video: Drop CONFIG_AM335X_LCD"
Dario Binacchi
dario.binacchi at amarulasolutions.com
Mon Nov 7 19:04:45 CET 2022
This reverts commit 82f7b869f5d7aad246a4621a18a5ad04475815ba.
It also removed code with driver model support.
The commit [1], as described in its message, was also designed to make
it easy to remove pre-driver-model code in the near future.
[1] 35ab1b6ef7f3a ("video: omap: split the legacy code from the DM code")
Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>
---
arch/arm/mach-omap2/am33xx/clock_am33xx.c | 4 +
board/bosch/guardian/board.c | 70 ++++
configs/am335x_guardian_defconfig | 1 +
drivers/video/Kconfig | 2 +
drivers/video/Makefile | 1 +
drivers/video/ti/Kconfig | 8 +
drivers/video/ti/Makefile | 10 +
drivers/video/ti/am335x-fb.c | 318 ++++++++++++++++
drivers/video/ti/am335x-fb.h | 71 ++++
drivers/video/ti/tilcdc-panel.c | 172 +++++++++
drivers/video/ti/tilcdc-panel.h | 14 +
drivers/video/ti/tilcdc.c | 426 ++++++++++++++++++++++
drivers/video/ti/tilcdc.h | 38 ++
13 files changed, 1135 insertions(+)
create mode 100644 drivers/video/ti/Kconfig
create mode 100644 drivers/video/ti/Makefile
create mode 100644 drivers/video/ti/am335x-fb.c
create mode 100644 drivers/video/ti/am335x-fb.h
create mode 100644 drivers/video/ti/tilcdc-panel.c
create mode 100644 drivers/video/ti/tilcdc-panel.h
create mode 100644 drivers/video/ti/tilcdc.c
create mode 100644 drivers/video/ti/tilcdc.h
diff --git a/arch/arm/mach-omap2/am33xx/clock_am33xx.c b/arch/arm/mach-omap2/am33xx/clock_am33xx.c
index cd3b34bf56bf..3a7ac6026405 100644
--- a/arch/arm/mach-omap2/am33xx/clock_am33xx.c
+++ b/arch/arm/mach-omap2/am33xx/clock_am33xx.c
@@ -227,6 +227,10 @@ void enable_basic_clocks(void)
&cmper->usb0clkctrl,
&cmper->emiffwclkctrl,
&cmper->emifclkctrl,
+#if CONFIG_IS_ENABLED(AM335X_LCD) && !CONFIG_IS_ENABLED(DM_VIDEO)
+ &cmper->lcdclkctrl,
+ &cmper->lcdcclkstctrl,
+#endif
0
};
diff --git a/board/bosch/guardian/board.c b/board/bosch/guardian/board.c
index bdf8d06add8a..7d1064a3fc7b 100644
--- a/board/bosch/guardian/board.c
+++ b/board/bosch/guardian/board.c
@@ -254,6 +254,74 @@ void lcdbacklight_en(void)
brightness != 0 ? 0x0A : 0x02, 0xFF);
}
+#if IS_ENABLED(CONFIG_AM335X_LCD)
+static void splash_screen(void)
+{
+ struct udevice *video_dev;
+ struct udevice *console_dev;
+ struct video_priv *vid_priv;
+ struct mtd_info *mtd;
+ size_t len;
+ int ret;
+
+ struct mtd_device *mtd_dev;
+ struct part_info *part;
+ u8 pnum;
+
+ ret = uclass_get_device(UCLASS_VIDEO, 0, &video_dev);
+ if (ret != 0) {
+ debug("video device not found\n");
+ goto exit;
+ }
+
+ vid_priv = dev_get_uclass_priv(video_dev);
+ mtdparts_init();
+
+ if (find_dev_and_part(SPLASH_SCREEN_NAND_PART, &mtd_dev, &pnum, &part)) {
+ debug("Could not find nand partition\n");
+ goto splash_screen_text;
+ }
+
+ mtd = get_nand_dev_by_index(mtd_dev->id->num);
+ if (!mtd) {
+ debug("MTD partition is not valid\n");
+ goto splash_screen_text;
+ }
+
+ len = SPLASH_SCREEN_BMP_FILE_SIZE;
+ ret = nand_read_skip_bad(mtd, part->offset, &len, NULL,
+ SPLASH_SCREEN_BMP_FILE_SIZE,
+ (u_char *)SPLASH_SCREEN_BMP_LOAD_ADDR);
+ if (ret != 0) {
+ debug("Reading NAND partition failed\n");
+ goto splash_screen_text;
+ }
+
+ ret = video_bmp_display(video_dev, SPLASH_SCREEN_BMP_LOAD_ADDR, 0, 0, false);
+ if (ret != 0) {
+ debug("No valid bmp image found!!\n");
+ goto splash_screen_text;
+ } else {
+ goto exit;
+ }
+
+splash_screen_text:
+ vid_priv->colour_fg = CONSOLE_COLOR_RED;
+ vid_priv->colour_bg = CONSOLE_COLOR_BLACK;
+
+ if (!uclass_first_device_err(UCLASS_VIDEO_CONSOLE, &console_dev)) {
+ debug("Found console\n");
+ vidconsole_position_cursor(console_dev, 17, 7);
+ vidconsole_put_string(console_dev, SPLASH_SCREEN_TEXT);
+ } else {
+ debug("No console device found\n");
+ }
+
+exit:
+ return;
+}
+#endif /* CONFIG_AM335X_LCD */
+
int board_late_init(void)
{
int ret;
@@ -272,6 +340,8 @@ int board_late_init(void)
return 0;
lcdbacklight_en();
+ if (IS_ENABLED(CONFIG_AM335X_LCD))
+ splash_screen();
return 0;
}
diff --git a/configs/am335x_guardian_defconfig b/configs/am335x_guardian_defconfig
index fef4fd155100..8eeb8555312d 100644
--- a/configs/am335x_guardian_defconfig
+++ b/configs/am335x_guardian_defconfig
@@ -131,6 +131,7 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0451
CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
CONFIG_USB_ETHER=y
CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_AM335X_LCD=y
CONFIG_BMP_16BPP=y
CONFIG_SPL_WDT=y
# CONFIG_SPL_USE_TINY_PRINTF is not set
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index c841b99bb30d..54fa93adb4f8 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -573,6 +573,8 @@ config ATMEL_HLCD
help
HLCDC supports video output to an attached LCD panel.
+source "drivers/video/ti/Kconfig"
+
source "drivers/video/exynos/Kconfig"
config LOGICORE_DP_TX
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 40a871d638e9..b359b0784050 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -26,6 +26,7 @@ obj-${CONFIG_EXYNOS_FB} += exynos/
obj-${CONFIG_VIDEO_ROCKCHIP} += rockchip/
obj-${CONFIG_VIDEO_STM32} += stm32/
obj-${CONFIG_VIDEO_TEGRA124} += tegra124/
+obj-y += ti/
obj-$(CONFIG_ATMEL_HLCD) += atmel_hlcdfb.o
obj-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o
diff --git a/drivers/video/ti/Kconfig b/drivers/video/ti/Kconfig
new file mode 100644
index 000000000000..3081e9e8c09b
--- /dev/null
+++ b/drivers/video/ti/Kconfig
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2020 Dario Binacchi <dariobin at libero.it>
+#
+config AM335X_LCD
+ bool "Enable AM335x video support"
+ help
+ Supports video output to an attached LCD panel.
diff --git a/drivers/video/ti/Makefile b/drivers/video/ti/Makefile
new file mode 100644
index 000000000000..ddddd592167b
--- /dev/null
+++ b/drivers/video/ti/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2020 Dario Binacchi <dariobin at libero.it>
+#
+
+ifdef CONFIG_DM_VIDEO
+obj-$(CONFIG_AM335X_LCD) += tilcdc.o tilcdc-panel.o
+else
+obj-$(CONFIG_AM335X_LCD) += am335x-fb.o
+endif
diff --git a/drivers/video/ti/am335x-fb.c b/drivers/video/ti/am335x-fb.c
new file mode 100644
index 000000000000..680ea47998da
--- /dev/null
+++ b/drivers/video/ti/am335x-fb.c
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013-2018 Hannes Schmelzer <oe5hpm at oevsv.at>
+ * B&R Industrial Automation GmbH - http://www.br-automation.com
+ * Copyright (C) 2020 Dario Binacchi <dariobin at libero.it>
+ *
+ * minimal framebuffer driver for TI's AM335x SoC to be compatible with
+ * Wolfgang Denk's LCD-Framework (CONFIG_LCD, common/lcd.c)
+ *
+ * - supporting 16/24/32bit RGB/TFT raster Mode (not using palette)
+ * - sets up LCD controller as in 'am335x_lcdpanel' struct given
+ * - starts output DMA from gd->fb_base buffer
+ */
+#include <common.h>
+#include <lcd.h>
+#include <log.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include "am335x-fb.h"
+
+#define LCDC_FMAX 200000000
+
+/* LCD Control Register */
+#define LCDC_CTRL_CLK_DIVISOR_MASK GENMASK(15, 8)
+#define LCDC_CTRL_RASTER_MODE BIT(0)
+#define LCDC_CTRL_CLK_DIVISOR(x) (((x) & GENMASK(7, 0)) << 8)
+/* LCD Clock Enable Register */
+#define LCDC_CLKC_ENABLE_CORECLKEN BIT(0)
+#define LCDC_CLKC_ENABLE_LIDDCLKEN BIT(1)
+#define LCDC_CLKC_ENABLE_DMACLKEN BIT(2)
+/* LCD DMA Control Register */
+#define LCDC_DMA_CTRL_BURST_SIZE(x) (((x) & GENMASK(2, 0)) << 4)
+#define LCDC_DMA_CTRL_BURST_1 0x0
+#define LCDC_DMA_CTRL_BURST_2 0x1
+#define LCDC_DMA_CTRL_BURST_4 0x2
+#define LCDC_DMA_CTRL_BURST_8 0x3
+#define LCDC_DMA_CTRL_BURST_16 0x4
+#define LCDC_DMA_CTRL_FIFO_TH(x) (((x) & GENMASK(2, 0)) << 8)
+/* LCD Timing_0 Register */
+#define LCDC_RASTER_TIMING_0_HORMSB(x) ((((x) - 1) & BIT(10)) >> 7)
+#define LCDC_RASTER_TIMING_0_HORLSB(x) (((((x) >> 4) - 1) & GENMASK(5, 0)) << 4)
+#define LCDC_RASTER_TIMING_0_HSWLSB(x) ((((x) - 1) & GENMASK(5, 0)) << 10)
+#define LCDC_RASTER_TIMING_0_HFPLSB(x) ((((x) - 1) & GENMASK(7, 0)) << 16)
+#define LCDC_RASTER_TIMING_0_HBPLSB(x) ((((x) - 1) & GENMASK(7, 0)) << 24)
+/* LCD Timing_1 Register */
+#define LCDC_RASTER_TIMING_1_VERLSB(x) (((x) - 1) & GENMASK(9, 0))
+#define LCDC_RASTER_TIMING_1_VSW(x) ((((x) - 1) & GENMASK(5, 0)) << 10)
+#define LCDC_RASTER_TIMING_1_VFP(x) (((x) & GENMASK(7, 0)) << 16)
+#define LCDC_RASTER_TIMING_1_VBP(x) (((x) & GENMASK(7, 0)) << 24)
+/* LCD Timing_2 Register */
+#define LCDC_RASTER_TIMING_2_HFPMSB(x) ((((x) - 1) & GENMASK(9, 8)) >> 8)
+#define LCDC_RASTER_TIMING_2_HBPMSB(x) ((((x) - 1) & GENMASK(9, 8)) >> 4)
+#define LCDC_RASTER_TIMING_2_ACB(x) (((x) & GENMASK(7, 0)) << 8)
+#define LCDC_RASTER_TIMING_2_ACBI(x) (((x) & GENMASK(3, 0)) << 16)
+#define LCDC_RASTER_TIMING_2_VSYNC_INVERT BIT(20)
+#define LCDC_RASTER_TIMING_2_HSYNC_INVERT BIT(21)
+#define LCDC_RASTER_TIMING_2_PXCLK_INVERT BIT(22)
+#define LCDC_RASTER_TIMING_2_DE_INVERT BIT(23)
+#define LCDC_RASTER_TIMING_2_HSVS_RISEFALL BIT(24)
+#define LCDC_RASTER_TIMING_2_HSVS_CONTROL BIT(25)
+#define LCDC_RASTER_TIMING_2_VERMSB(x) ((((x) - 1) & BIT(10)) << 16)
+#define LCDC_RASTER_TIMING_2_HSWMSB(x) ((((x) - 1) & GENMASK(9, 6)) << 21)
+/* LCD Raster Ctrl Register */
+#define LCDC_RASTER_CTRL_ENABLE BIT(0)
+#define LCDC_RASTER_CTRL_TFT_MODE BIT(7)
+#define LCDC_RASTER_CTRL_DATA_ORDER BIT(8)
+#define LCDC_RASTER_CTRL_REQDLY(x) (((x) & GENMASK(7, 0)) << 12)
+#define LCDC_RASTER_CTRL_PALMODE_RAWDATA (0x02 << 20)
+#define LCDC_RASTER_CTRL_TFT_ALT_ENABLE BIT(23)
+#define LCDC_RASTER_CTRL_TFT_24BPP_MODE BIT(25)
+#define LCDC_RASTER_CTRL_TFT_24BPP_UNPACK BIT(26)
+
+struct am335x_lcdhw {
+ unsigned int pid; /* 0x00 */
+ unsigned int ctrl; /* 0x04 */
+ unsigned int gap0; /* 0x08 */
+ unsigned int lidd_ctrl; /* 0x0C */
+ unsigned int lidd_cs0_conf; /* 0x10 */
+ unsigned int lidd_cs0_addr; /* 0x14 */
+ unsigned int lidd_cs0_data; /* 0x18 */
+ unsigned int lidd_cs1_conf; /* 0x1C */
+ unsigned int lidd_cs1_addr; /* 0x20 */
+ unsigned int lidd_cs1_data; /* 0x24 */
+ unsigned int raster_ctrl; /* 0x28 */
+ unsigned int raster_timing0; /* 0x2C */
+ unsigned int raster_timing1; /* 0x30 */
+ unsigned int raster_timing2; /* 0x34 */
+ unsigned int raster_subpanel; /* 0x38 */
+ unsigned int raster_subpanel2; /* 0x3C */
+ unsigned int lcddma_ctrl; /* 0x40 */
+ unsigned int lcddma_fb0_base; /* 0x44 */
+ unsigned int lcddma_fb0_ceiling; /* 0x48 */
+ unsigned int lcddma_fb1_base; /* 0x4C */
+ unsigned int lcddma_fb1_ceiling; /* 0x50 */
+ unsigned int sysconfig; /* 0x54 */
+ unsigned int irqstatus_raw; /* 0x58 */
+ unsigned int irqstatus; /* 0x5C */
+ unsigned int irqenable_set; /* 0x60 */
+ unsigned int irqenable_clear; /* 0x64 */
+ unsigned int gap1; /* 0x68 */
+ unsigned int clkc_enable; /* 0x6C */
+ unsigned int clkc_reset; /* 0x70 */
+};
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if !defined(LCD_CNTL_BASE)
+#error "hw-base address of LCD-Controller (LCD_CNTL_BASE) not defined!"
+#endif
+
+/* Macro definitions */
+#define FBSIZE(x) (((x)->hactive * (x)->vactive * (x)->bpp) >> 3)
+
+#define LCDC_RASTER_TIMING_2_INVMASK(x) ((x) & GENMASK(25, 20))
+
+static struct am335x_lcdhw *lcdhw = (void *)LCD_CNTL_BASE;
+
+int lcd_get_size(int *line_length)
+{
+ *line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8;
+ return *line_length * panel_info.vl_row + 0x20;
+}
+
+struct dpll_data {
+ unsigned long rounded_rate;
+ u16 rounded_m;
+ u8 rounded_n;
+ u8 rounded_div;
+};
+
+/**
+ * am335x_dpll_round_rate() - Round a target rate for an OMAP DPLL
+ *
+ * @dpll_data: struct dpll_data pointer for the DPLL
+ * @rate: New DPLL clock rate
+ * Return: rounded rate and the computed m, n and div values in the dpll_data
+ * structure, or -ve error code.
+ */
+static ulong am335x_dpll_round_rate(struct dpll_data *dd, ulong rate)
+{
+ unsigned int m, n, d;
+ unsigned long rounded_rate;
+ int err, err_r;
+
+ dd->rounded_rate = -EFAULT;
+ err = rate;
+ err_r = err;
+
+ for (d = 2; err && d < 255; d++) {
+ for (m = 2; m < 2047; m++) {
+ if ((V_OSCK * m) < (rate * d))
+ continue;
+
+ n = (V_OSCK * m) / (rate * d);
+ if (n > 127)
+ break;
+
+ if (((V_OSCK * m) / n) > LCDC_FMAX)
+ break;
+
+ rounded_rate = (V_OSCK * m) / n / d;
+ err = abs(rounded_rate - rate);
+ if (err < err_r) {
+ err_r = err;
+ dd->rounded_rate = rounded_rate;
+ dd->rounded_m = m;
+ dd->rounded_n = n;
+ dd->rounded_div = d;
+ if (err == 0)
+ break;
+ }
+ }
+ }
+
+ debug("DPLL display: best error %d Hz (M %d, N %d, DIV %d)\n",
+ err_r, dd->rounded_m, dd->rounded_n, dd->rounded_div);
+
+ return dd->rounded_rate;
+}
+
+/**
+ * am335x_fb_set_pixel_clk_rate() - Set pixel clock rate.
+ *
+ * @am335x_lcdhw: Base address of the LCD controller registers.
+ * @rate: New clock rate in Hz.
+ * Return: new rate, or -ve error code.
+ */
+static ulong am335x_fb_set_pixel_clk_rate(struct am335x_lcdhw *regs, ulong rate)
+{
+ struct dpll_params dpll_disp = { 1, 0, 1, -1, -1, -1, -1 };
+ struct dpll_data dd;
+ ulong round_rate;
+ u32 reg;
+
+ round_rate = am335x_dpll_round_rate(&dd, rate);
+ if (IS_ERR_VALUE(round_rate))
+ return round_rate;
+
+ dpll_disp.m = dd.rounded_m;
+ dpll_disp.n = dd.rounded_n;
+ do_setup_dpll(&dpll_disp_regs, &dpll_disp);
+
+ reg = readl(®s->ctrl) & ~LCDC_CTRL_CLK_DIVISOR_MASK;
+ reg |= LCDC_CTRL_CLK_DIVISOR(dd.rounded_div);
+ writel(reg, ®s->ctrl);
+ return round_rate;
+}
+
+int am335xfb_init(struct am335x_lcdpanel *panel)
+{
+ u32 raster_ctrl = 0;
+ struct cm_dpll *const cmdpll = (struct cm_dpll *)CM_DPLL;
+ ulong rate;
+ u32 reg;
+
+ if (gd->fb_base == 0) {
+ printf("ERROR: no valid fb_base stored in GLOBAL_DATA_PTR!\n");
+ return -1;
+ }
+ if (panel == NULL) {
+ printf("ERROR: missing ptr to am335x_lcdpanel!\n");
+ return -1;
+ }
+
+ /* We can already set the bits for the raster_ctrl in this check */
+ switch (panel->bpp) {
+ case 16:
+ break;
+ case 32:
+ raster_ctrl |= LCDC_RASTER_CTRL_TFT_24BPP_UNPACK;
+ /* fallthrough */
+ case 24:
+ raster_ctrl |= LCDC_RASTER_CTRL_TFT_24BPP_MODE;
+ break;
+ default:
+ pr_err("am335x-fb: invalid bpp value: %d\n", panel->bpp);
+ return -1;
+ }
+
+ /* check given clock-frequency */
+ if (panel->pxl_clk > (LCDC_FMAX / 2)) {
+ pr_err("am335x-fb: requested pxl-clk: %d not supported!\n",
+ panel->pxl_clk);
+ return -1;
+ }
+
+ debug("setting up LCD-Controller for %dx%dx%d (hfp=%d,hbp=%d,hsw=%d / ",
+ panel->hactive, panel->vactive, panel->bpp,
+ panel->hfp, panel->hbp, panel->hsw);
+ debug("vfp=%d,vbp=%d,vsw=%d / clk=%d)\n",
+ panel->vfp, panel->vfp, panel->vsw, panel->pxl_clk);
+ debug("using frambuffer at 0x%08x with size %d.\n",
+ (unsigned int)gd->fb_base, FBSIZE(panel));
+
+ rate = am335x_fb_set_pixel_clk_rate(lcdhw, panel->pxl_clk);
+ if (IS_ERR_VALUE(rate))
+ return rate;
+
+ /* clock source for LCDC from dispPLL M2 */
+ writel(0x0, &cmdpll->clklcdcpixelclk);
+
+ /* palette default entry */
+ memset((void *)gd->fb_base, 0, 0x20);
+ *(unsigned int *)gd->fb_base = 0x4000;
+ /* point fb behind palette */
+ gd->fb_base += 0x20;
+
+ /* turn ON display through powercontrol function if accessible */
+ if (panel->panel_power_ctrl != NULL)
+ panel->panel_power_ctrl(1);
+
+ debug("am335x-fb: wait for stable power ...\n");
+ mdelay(panel->pup_delay);
+ lcdhw->clkc_enable = LCDC_CLKC_ENABLE_CORECLKEN |
+ LCDC_CLKC_ENABLE_LIDDCLKEN | LCDC_CLKC_ENABLE_DMACLKEN;
+ lcdhw->raster_ctrl = 0;
+
+ reg = lcdhw->ctrl & LCDC_CTRL_CLK_DIVISOR_MASK;
+ reg |= LCDC_CTRL_RASTER_MODE;
+ lcdhw->ctrl = reg;
+
+ lcdhw->lcddma_fb0_base = gd->fb_base;
+ lcdhw->lcddma_fb0_ceiling = gd->fb_base + FBSIZE(panel);
+ lcdhw->lcddma_fb1_base = gd->fb_base;
+ lcdhw->lcddma_fb1_ceiling = gd->fb_base + FBSIZE(panel);
+ lcdhw->lcddma_ctrl = LCDC_DMA_CTRL_BURST_SIZE(LCDC_DMA_CTRL_BURST_16);
+
+ lcdhw->raster_timing0 = LCDC_RASTER_TIMING_0_HORLSB(panel->hactive) |
+ LCDC_RASTER_TIMING_0_HORMSB(panel->hactive) |
+ LCDC_RASTER_TIMING_0_HFPLSB(panel->hfp) |
+ LCDC_RASTER_TIMING_0_HBPLSB(panel->hbp) |
+ LCDC_RASTER_TIMING_0_HSWLSB(panel->hsw);
+ lcdhw->raster_timing1 = LCDC_RASTER_TIMING_1_VBP(panel->vbp) |
+ LCDC_RASTER_TIMING_1_VFP(panel->vfp) |
+ LCDC_RASTER_TIMING_1_VSW(panel->vsw) |
+ LCDC_RASTER_TIMING_1_VERLSB(panel->vactive);
+ lcdhw->raster_timing2 = LCDC_RASTER_TIMING_2_HSWMSB(panel->hsw) |
+ LCDC_RASTER_TIMING_2_VERMSB(panel->vactive) |
+ LCDC_RASTER_TIMING_2_INVMASK(panel->pol) |
+ LCDC_RASTER_TIMING_2_HBPMSB(panel->hbp) |
+ LCDC_RASTER_TIMING_2_HFPMSB(panel->hfp) |
+ 0x0000FF00; /* clk cycles for ac-bias */
+ lcdhw->raster_ctrl = raster_ctrl |
+ LCDC_RASTER_CTRL_PALMODE_RAWDATA |
+ LCDC_RASTER_CTRL_TFT_MODE |
+ LCDC_RASTER_CTRL_ENABLE;
+
+ debug("am335x-fb: waiting picture to be stable.\n.");
+ mdelay(panel->pon_delay);
+
+ return 0;
+}
diff --git a/drivers/video/ti/am335x-fb.h b/drivers/video/ti/am335x-fb.h
new file mode 100644
index 000000000000..ad9b015e090f
--- /dev/null
+++ b/drivers/video/ti/am335x-fb.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2013-2018 Hannes Schmelzer <oe5hpm at oevsv.at> -
+ * B&R Industrial Automation GmbH - http://www.br-automation.com
+ */
+
+#ifndef AM335X_FB_H
+#define AM335X_FB_H
+
+#define HSVS_CONTROL BIT(25) /*
+ * 0 = lcd_lp and lcd_fp are driven on
+ * opposite edges of pixel clock than
+ * the lcd_pixel_o
+ * 1 = lcd_lp and lcd_fp are driven
+ * according to bit 24 Note that this
+ * bit MUST be set to '0' for Passive
+ * Matrix displays the edge timing is
+ * fixed
+ */
+#define HSVS_RISEFALL BIT(24) /*
+ * 0 = lcd_lp and lcd_fp are driven on
+ * the rising edge of pixel clock (bit
+ * 25 must be set to 1)
+ * 1 = lcd_lp and lcd_fp are driven on
+ * the falling edge of pixel clock (bit
+ * 25 must be set to 1)
+ */
+#define DE_INVERT BIT(23) /*
+ * 0 = DE is low-active
+ * 1 = DE is high-active
+ */
+#define PXCLK_INVERT BIT(22) /*
+ * 0 = pix-clk is high-active
+ * 1 = pic-clk is low-active
+ */
+#define HSYNC_INVERT BIT(21) /*
+ * 0 = HSYNC is active high
+ * 1 = HSYNC is avtive low
+ */
+#define VSYNC_INVERT BIT(20) /*
+ * 0 = VSYNC is active high
+ * 1 = VSYNC is active low
+ */
+
+struct am335x_lcdpanel {
+ unsigned int hactive; /* Horizontal active area */
+ unsigned int vactive; /* Vertical active area */
+ unsigned int bpp; /* bits per pixel */
+ unsigned int hfp; /* Horizontal front porch */
+ unsigned int hbp; /* Horizontal back porch */
+ unsigned int hsw; /* Horizontal Sync Pulse Width */
+ unsigned int vfp; /* Vertical front porch */
+ unsigned int vbp; /* Vertical back porch */
+ unsigned int vsw; /* Vertical Sync Pulse Width */
+ unsigned int pxl_clk; /* Pixel clock */
+ unsigned int pol; /* polarity of sync, clock signals */
+ unsigned int pup_delay; /*
+ * time in ms after power on to
+ * initialization of lcd-controller
+ * (VCC ramp up time)
+ */
+ unsigned int pon_delay; /*
+ * time in ms after initialization of
+ * lcd-controller (pic stabilization)
+ */
+ void (*panel_power_ctrl)(int); /* fp for power on/off display */
+};
+
+int am335xfb_init(struct am335x_lcdpanel *panel);
+
+#endif /* AM335X_FB_H */
diff --git a/drivers/video/ti/tilcdc-panel.c b/drivers/video/ti/tilcdc-panel.c
new file mode 100644
index 000000000000..df95086a5151
--- /dev/null
+++ b/drivers/video/ti/tilcdc-panel.c
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * OMAP panel support
+ *
+ * Copyright (C) 2020 Dario Binacchi <dariobin at libero.it>
+ */
+
+#include <common.h>
+#include <backlight.h>
+#include <clk.h>
+#include <display.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <log.h>
+#include <panel.h>
+#include <asm/gpio.h>
+#include <linux/err.h>
+#include "tilcdc.h"
+
+struct tilcdc_panel_priv {
+ struct tilcdc_panel_info info;
+ struct display_timing timing;
+ struct udevice *backlight;
+ struct gpio_desc enable;
+};
+
+static int tilcdc_panel_enable_backlight(struct udevice *dev)
+{
+ struct tilcdc_panel_priv *priv = dev_get_priv(dev);
+
+ if (dm_gpio_is_valid(&priv->enable))
+ dm_gpio_set_value(&priv->enable, 1);
+
+ if (priv->backlight)
+ return backlight_enable(priv->backlight);
+
+ return 0;
+}
+
+static int tilcdc_panel_set_backlight(struct udevice *dev, int percent)
+{
+ struct tilcdc_panel_priv *priv = dev_get_priv(dev);
+
+ if (dm_gpio_is_valid(&priv->enable))
+ dm_gpio_set_value(&priv->enable, 1);
+
+ if (priv->backlight)
+ return backlight_set_brightness(priv->backlight, percent);
+
+ return 0;
+}
+
+int tilcdc_panel_get_display_info(struct udevice *dev,
+ struct tilcdc_panel_info *info)
+{
+ struct tilcdc_panel_priv *priv = dev_get_priv(dev);
+
+ memcpy(info, &priv->info, sizeof(*info));
+ return 0;
+}
+
+static int tilcdc_panel_get_display_timing(struct udevice *dev,
+ struct display_timing *timing)
+{
+ struct tilcdc_panel_priv *priv = dev_get_priv(dev);
+
+ memcpy(timing, &priv->timing, sizeof(*timing));
+ return 0;
+}
+
+static int tilcdc_panel_remove(struct udevice *dev)
+{
+ struct tilcdc_panel_priv *priv = dev_get_priv(dev);
+
+ if (dm_gpio_is_valid(&priv->enable))
+ dm_gpio_free(dev, &priv->enable);
+
+ return 0;
+}
+
+static int tilcdc_panel_probe(struct udevice *dev)
+{
+ struct tilcdc_panel_priv *priv = dev_get_priv(dev);
+ int err;
+
+ err = uclass_get_device_by_phandle(UCLASS_PANEL_BACKLIGHT, dev,
+ "backlight", &priv->backlight);
+ if (err)
+ dev_warn(dev, "failed to get backlight\n");
+
+ err = gpio_request_by_name(dev, "enable-gpios", 0, &priv->enable,
+ GPIOD_IS_OUT);
+ if (err) {
+ dev_warn(dev, "failed to get enable GPIO\n");
+ if (err != -ENOENT)
+ return err;
+ }
+
+ return 0;
+}
+
+static int tilcdc_panel_of_to_plat(struct udevice *dev)
+{
+ struct tilcdc_panel_priv *priv = dev_get_priv(dev);
+ ofnode node;
+ int err;
+
+ err = ofnode_decode_display_timing(dev_ofnode(dev), 0, &priv->timing);
+ if (err) {
+ dev_err(dev, "failed to get display timing\n");
+ return err;
+ }
+
+ node = dev_read_subnode(dev, "panel-info");
+ if (!ofnode_valid(node)) {
+ dev_err(dev, "missing 'panel-info' node\n");
+ return -ENXIO;
+ }
+
+ err |= ofnode_read_u32(node, "ac-bias", &priv->info.ac_bias);
+ err |= ofnode_read_u32(node, "ac-bias-intrpt",
+ &priv->info.ac_bias_intrpt);
+ err |= ofnode_read_u32(node, "dma-burst-sz", &priv->info.dma_burst_sz);
+ err |= ofnode_read_u32(node, "bpp", &priv->info.bpp);
+ err |= ofnode_read_u32(node, "fdd", &priv->info.fdd);
+ err |= ofnode_read_u32(node, "sync-edge", &priv->info.sync_edge);
+ err |= ofnode_read_u32(node, "sync-ctrl", &priv->info.sync_ctrl);
+ err |= ofnode_read_u32(node, "raster-order", &priv->info.raster_order);
+ err |= ofnode_read_u32(node, "fifo-th", &priv->info.fifo_th);
+ if (err) {
+ dev_err(dev, "failed to get panel info\n");
+ return err;
+ }
+
+ /* optional */
+ priv->info.tft_alt_mode = ofnode_read_bool(node, "tft-alt-mode");
+ priv->info.invert_pxl_clk = ofnode_read_bool(node, "invert-pxl-clk");
+
+ dev_dbg(dev, "LCD: %dx%d, bpp=%d, clk=%d Hz\n",
+ priv->timing.hactive.typ, priv->timing.vactive.typ,
+ priv->info.bpp, priv->timing.pixelclock.typ);
+ dev_dbg(dev, " hbp=%d, hfp=%d, hsw=%d\n",
+ priv->timing.hback_porch.typ, priv->timing.hfront_porch.typ,
+ priv->timing.hsync_len.typ);
+ dev_dbg(dev, " vbp=%d, vfp=%d, vsw=%d\n",
+ priv->timing.vback_porch.typ, priv->timing.vfront_porch.typ,
+ priv->timing.vsync_len.typ);
+
+ return 0;
+}
+
+static const struct panel_ops tilcdc_panel_ops = {
+ .enable_backlight = tilcdc_panel_enable_backlight,
+ .set_backlight = tilcdc_panel_set_backlight,
+ .get_display_timing = tilcdc_panel_get_display_timing,
+};
+
+static const struct udevice_id tilcdc_panel_ids[] = {
+ {.compatible = "ti,tilcdc,panel"},
+ {}
+};
+
+U_BOOT_DRIVER(tilcdc_panel) = {
+ .name = "tilcdc_panel",
+ .id = UCLASS_PANEL,
+ .of_match = tilcdc_panel_ids,
+ .ops = &tilcdc_panel_ops,
+ .of_to_plat = tilcdc_panel_of_to_plat,
+ .probe = tilcdc_panel_probe,
+ .remove = tilcdc_panel_remove,
+ .priv_auto = sizeof(struct tilcdc_panel_priv),
+};
diff --git a/drivers/video/ti/tilcdc-panel.h b/drivers/video/ti/tilcdc-panel.h
new file mode 100644
index 000000000000..6bcfbf8a8b4c
--- /dev/null
+++ b/drivers/video/ti/tilcdc-panel.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020 Dario Binacchi <dariobin at libero.it>
+ */
+
+#ifndef _TILCDC_PANEL_H
+#define _TILCDC_PANEL_H
+
+#include "tilcdc.h"
+
+int tilcdc_panel_get_display_info(struct udevice *dev,
+ struct tilcdc_panel_info *info);
+
+#endif /* _TILCDC_PANEL_H */
diff --git a/drivers/video/ti/tilcdc.c b/drivers/video/ti/tilcdc.c
new file mode 100644
index 000000000000..90c1edd87e6f
--- /dev/null
+++ b/drivers/video/ti/tilcdc.c
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Dario Binacchi <dariobin at libero.it>
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <lcd.h>
+#include <log.h>
+#include <panel.h>
+#include <video.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/utils.h>
+#include "tilcdc.h"
+#include "tilcdc-panel.h"
+
+#define LCDC_FMAX 200000000
+
+/* LCD Control Register */
+#define LCDC_CTRL_CLK_DIVISOR_MASK GENMASK(15, 8)
+#define LCDC_CTRL_RASTER_MODE BIT(0)
+#define LCDC_CTRL_CLK_DIVISOR(x) (((x) & GENMASK(7, 0)) << 8)
+/* LCD Clock Enable Register */
+#define LCDC_CLKC_ENABLE_CORECLKEN BIT(0)
+#define LCDC_CLKC_ENABLE_LIDDCLKEN BIT(1)
+#define LCDC_CLKC_ENABLE_DMACLKEN BIT(2)
+/* LCD DMA Control Register */
+#define LCDC_DMA_CTRL_BURST_SIZE(x) (((x) & GENMASK(2, 0)) << 4)
+#define LCDC_DMA_CTRL_BURST_1 0x0
+#define LCDC_DMA_CTRL_BURST_2 0x1
+#define LCDC_DMA_CTRL_BURST_4 0x2
+#define LCDC_DMA_CTRL_BURST_8 0x3
+#define LCDC_DMA_CTRL_BURST_16 0x4
+#define LCDC_DMA_CTRL_FIFO_TH(x) (((x) & GENMASK(2, 0)) << 8)
+/* LCD Timing_0 Register */
+#define LCDC_RASTER_TIMING_0_HORMSB(x) ((((x) - 1) & BIT(10)) >> 7)
+#define LCDC_RASTER_TIMING_0_HORLSB(x) (((((x) >> 4) - 1) & GENMASK(5, 0)) << 4)
+#define LCDC_RASTER_TIMING_0_HSWLSB(x) ((((x) - 1) & GENMASK(5, 0)) << 10)
+#define LCDC_RASTER_TIMING_0_HFPLSB(x) ((((x) - 1) & GENMASK(7, 0)) << 16)
+#define LCDC_RASTER_TIMING_0_HBPLSB(x) ((((x) - 1) & GENMASK(7, 0)) << 24)
+/* LCD Timing_1 Register */
+#define LCDC_RASTER_TIMING_1_VERLSB(x) (((x) - 1) & GENMASK(9, 0))
+#define LCDC_RASTER_TIMING_1_VSW(x) ((((x) - 1) & GENMASK(5, 0)) << 10)
+#define LCDC_RASTER_TIMING_1_VFP(x) (((x) & GENMASK(7, 0)) << 16)
+#define LCDC_RASTER_TIMING_1_VBP(x) (((x) & GENMASK(7, 0)) << 24)
+/* LCD Timing_2 Register */
+#define LCDC_RASTER_TIMING_2_HFPMSB(x) ((((x) - 1) & GENMASK(9, 8)) >> 8)
+#define LCDC_RASTER_TIMING_2_HBPMSB(x) ((((x) - 1) & GENMASK(9, 8)) >> 4)
+#define LCDC_RASTER_TIMING_2_ACB(x) (((x) & GENMASK(7, 0)) << 8)
+#define LCDC_RASTER_TIMING_2_ACBI(x) (((x) & GENMASK(3, 0)) << 16)
+#define LCDC_RASTER_TIMING_2_VSYNC_INVERT BIT(20)
+#define LCDC_RASTER_TIMING_2_HSYNC_INVERT BIT(21)
+#define LCDC_RASTER_TIMING_2_PXCLK_INVERT BIT(22)
+#define LCDC_RASTER_TIMING_2_DE_INVERT BIT(23)
+#define LCDC_RASTER_TIMING_2_HSVS_RISEFALL BIT(24)
+#define LCDC_RASTER_TIMING_2_HSVS_CONTROL BIT(25)
+#define LCDC_RASTER_TIMING_2_VERMSB(x) ((((x) - 1) & BIT(10)) << 16)
+#define LCDC_RASTER_TIMING_2_HSWMSB(x) ((((x) - 1) & GENMASK(9, 6)) << 21)
+/* LCD Raster Ctrl Register */
+#define LCDC_RASTER_CTRL_ENABLE BIT(0)
+#define LCDC_RASTER_CTRL_TFT_MODE BIT(7)
+#define LCDC_RASTER_CTRL_DATA_ORDER BIT(8)
+#define LCDC_RASTER_CTRL_REQDLY(x) (((x) & GENMASK(7, 0)) << 12)
+#define LCDC_RASTER_CTRL_PALMODE_RAWDATA (0x02 << 20)
+#define LCDC_RASTER_CTRL_TFT_ALT_ENABLE BIT(23)
+#define LCDC_RASTER_CTRL_TFT_24BPP_MODE BIT(25)
+#define LCDC_RASTER_CTRL_TFT_24BPP_UNPACK BIT(26)
+
+enum {
+ LCDC_MAX_WIDTH = 2048,
+ LCDC_MAX_HEIGHT = 2048,
+ LCDC_MAX_LOG2_BPP = VIDEO_BPP32,
+};
+
+struct tilcdc_regs {
+ u32 pid;
+ u32 ctrl;
+ u32 gap0;
+ u32 lidd_ctrl;
+ u32 lidd_cs0_conf;
+ u32 lidd_cs0_addr;
+ u32 lidd_cs0_data;
+ u32 lidd_cs1_conf;
+ u32 lidd_cs1_addr;
+ u32 lidd_cs1_data;
+ u32 raster_ctrl;
+ u32 raster_timing0;
+ u32 raster_timing1;
+ u32 raster_timing2;
+ u32 raster_subpanel;
+ u32 raster_subpanel2;
+ u32 lcddma_ctrl;
+ u32 lcddma_fb0_base;
+ u32 lcddma_fb0_ceiling;
+ u32 lcddma_fb1_base;
+ u32 lcddma_fb1_ceiling;
+ u32 sysconfig;
+ u32 irqstatus_raw;
+ u32 irqstatus;
+ u32 irqenable_set;
+ u32 irqenable_clear;
+ u32 gap1;
+ u32 clkc_enable;
+ u32 clkc_reset;
+};
+
+struct tilcdc_priv {
+ struct tilcdc_regs *regs;
+ struct clk gclk;
+ struct clk dpll_m2_clk;
+};
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static ulong tilcdc_set_pixel_clk_rate(struct udevice *dev, ulong rate)
+{
+ struct tilcdc_priv *priv = dev_get_priv(dev);
+ struct tilcdc_regs *regs = priv->regs;
+ ulong mult_rate, mult_round_rate, best_err, err;
+ u32 v;
+ int div, i;
+
+ best_err = rate;
+ div = 0;
+ for (i = 2; i <= 255; i++) {
+ mult_rate = rate * i;
+ mult_round_rate = clk_round_rate(&priv->gclk, mult_rate);
+ if (IS_ERR_VALUE(mult_round_rate))
+ return mult_round_rate;
+
+ err = mult_rate - mult_round_rate;
+ if (err < best_err) {
+ best_err = err;
+ div = i;
+ if (err == 0)
+ break;
+ }
+ }
+
+ if (div == 0) {
+ dev_err(dev, "failed to find a divisor\n");
+ return -EFAULT;
+ }
+
+ mult_rate = clk_set_rate(&priv->gclk, rate * div);
+ v = readl(®s->ctrl) & ~LCDC_CTRL_CLK_DIVISOR_MASK;
+ v |= LCDC_CTRL_CLK_DIVISOR(div);
+ writel(v, ®s->ctrl);
+ rate = mult_rate / div;
+ dev_dbg(dev, "rate=%ld, div=%d, err=%ld\n", rate, div, err);
+ return rate;
+}
+
+static int tilcdc_remove(struct udevice *dev)
+{
+ struct video_uc_plat *uc_plat = dev_get_uclass_plat(dev);
+ struct tilcdc_priv *priv = dev_get_priv(dev);
+
+ uc_plat->base -= 0x20;
+ uc_plat->size += 0x20;
+ clk_release_all(&priv->gclk, 1);
+ clk_release_all(&priv->dpll_m2_clk, 1);
+ return 0;
+}
+
+static int tilcdc_probe(struct udevice *dev)
+{
+ struct video_uc_plat *uc_plat = dev_get_uclass_plat(dev);
+ struct video_priv *uc_priv = dev_get_uclass_priv(dev);
+ struct tilcdc_priv *priv = dev_get_priv(dev);
+ struct tilcdc_regs *regs = priv->regs;
+ struct udevice *panel, *clk_dev;
+ struct tilcdc_panel_info info;
+ struct display_timing timing;
+ ulong rate;
+ u32 reg;
+ int err;
+
+ /* Before relocation we don't need to do anything */
+ if (!(gd->flags & GD_FLG_RELOC))
+ return 0;
+
+ err = uclass_get_device(UCLASS_PANEL, 0, &panel);
+ if (err) {
+ dev_err(dev, "failed to get panel\n");
+ return err;
+ }
+
+ err = panel_get_display_timing(panel, &timing);
+ if (err) {
+ dev_err(dev, "failed to get display timing\n");
+ return err;
+ }
+
+ if (timing.pixelclock.typ > (LCDC_FMAX / 2)) {
+ dev_err(dev, "invalid display clock-frequency: %d Hz\n",
+ timing.pixelclock.typ);
+ return -EINVAL;
+ }
+
+ if (timing.hactive.typ > LCDC_MAX_WIDTH)
+ timing.hactive.typ = LCDC_MAX_WIDTH;
+
+ if (timing.vactive.typ > LCDC_MAX_HEIGHT)
+ timing.vactive.typ = LCDC_MAX_HEIGHT;
+
+ err = tilcdc_panel_get_display_info(panel, &info);
+ if (err) {
+ dev_err(dev, "failed to get panel info\n");
+ return err;
+ }
+
+ switch (info.bpp) {
+ case 16:
+ case 24:
+ case 32:
+ break;
+ default:
+ dev_err(dev, "invalid seting, bpp: %d\n", info.bpp);
+ return -EINVAL;
+ }
+
+ switch (info.dma_burst_sz) {
+ case 1:
+ case 2:
+ case 4:
+ case 8:
+ case 16:
+ break;
+ default:
+ dev_err(dev, "invalid setting, dma-burst-sz: %d\n",
+ info.dma_burst_sz);
+ return -EINVAL;
+ }
+
+ err = uclass_get_device_by_name(UCLASS_CLK, "lcd_gclk at 534", &clk_dev);
+ if (err) {
+ dev_err(dev, "failed to get lcd_gclk device\n");
+ return err;
+ }
+
+ err = clk_request(clk_dev, &priv->gclk);
+ if (err) {
+ dev_err(dev, "failed to get %s clock\n", clk_dev->name);
+ return err;
+ }
+
+ rate = tilcdc_set_pixel_clk_rate(dev, timing.pixelclock.typ);
+ if (IS_ERR_VALUE(rate)) {
+ dev_err(dev, "failed to set pixel clock rate\n");
+ return rate;
+ }
+
+ err = uclass_get_device_by_name(UCLASS_CLK, "dpll_disp_m2_ck at 4a4",
+ &clk_dev);
+ if (err) {
+ dev_err(dev, "failed to get dpll_disp_m2 clock device\n");
+ return err;
+ }
+
+ err = clk_request(clk_dev, &priv->dpll_m2_clk);
+ if (err) {
+ dev_err(dev, "failed to get %s clock\n", clk_dev->name);
+ return err;
+ }
+
+ err = clk_set_parent(&priv->gclk, &priv->dpll_m2_clk);
+ if (err) {
+ dev_err(dev, "failed to set %s clock as %s's parent\n",
+ priv->dpll_m2_clk.dev->name, priv->gclk.dev->name);
+ return err;
+ }
+
+ /* palette default entry */
+ memset((void *)uc_plat->base, 0, 0x20);
+ *(unsigned int *)uc_plat->base = 0x4000;
+ /* point fb behind palette */
+ uc_plat->base += 0x20;
+ uc_plat->size -= 0x20;
+
+ writel(LCDC_CLKC_ENABLE_CORECLKEN | LCDC_CLKC_ENABLE_LIDDCLKEN |
+ LCDC_CLKC_ENABLE_DMACLKEN, ®s->clkc_enable);
+ writel(0, ®s->raster_ctrl);
+
+ reg = readl(®s->ctrl) & LCDC_CTRL_CLK_DIVISOR_MASK;
+ reg |= LCDC_CTRL_RASTER_MODE;
+ writel(reg, ®s->ctrl);
+
+ reg = (timing.hactive.typ * timing.vactive.typ * info.bpp) >> 3;
+ reg += uc_plat->base;
+ writel(uc_plat->base, ®s->lcddma_fb0_base);
+ writel(reg, ®s->lcddma_fb0_ceiling);
+ writel(uc_plat->base, ®s->lcddma_fb1_base);
+ writel(reg, ®s->lcddma_fb1_ceiling);
+
+ reg = LCDC_DMA_CTRL_FIFO_TH(info.fifo_th);
+ switch (info.dma_burst_sz) {
+ case 1:
+ reg |= LCDC_DMA_CTRL_BURST_SIZE(LCDC_DMA_CTRL_BURST_1);
+ break;
+ case 2:
+ reg |= LCDC_DMA_CTRL_BURST_SIZE(LCDC_DMA_CTRL_BURST_2);
+ break;
+ case 4:
+ reg |= LCDC_DMA_CTRL_BURST_SIZE(LCDC_DMA_CTRL_BURST_4);
+ break;
+ case 8:
+ reg |= LCDC_DMA_CTRL_BURST_SIZE(LCDC_DMA_CTRL_BURST_8);
+ break;
+ case 16:
+ reg |= LCDC_DMA_CTRL_BURST_SIZE(LCDC_DMA_CTRL_BURST_16);
+ break;
+ }
+
+ writel(reg, ®s->lcddma_ctrl);
+
+ writel(LCDC_RASTER_TIMING_0_HORLSB(timing.hactive.typ) |
+ LCDC_RASTER_TIMING_0_HORMSB(timing.hactive.typ) |
+ LCDC_RASTER_TIMING_0_HFPLSB(timing.hfront_porch.typ) |
+ LCDC_RASTER_TIMING_0_HBPLSB(timing.hback_porch.typ) |
+ LCDC_RASTER_TIMING_0_HSWLSB(timing.hsync_len.typ),
+ ®s->raster_timing0);
+
+ writel(LCDC_RASTER_TIMING_1_VBP(timing.vback_porch.typ) |
+ LCDC_RASTER_TIMING_1_VFP(timing.vfront_porch.typ) |
+ LCDC_RASTER_TIMING_1_VSW(timing.vsync_len.typ) |
+ LCDC_RASTER_TIMING_1_VERLSB(timing.vactive.typ),
+ ®s->raster_timing1);
+
+ reg = LCDC_RASTER_TIMING_2_ACB(info.ac_bias) |
+ LCDC_RASTER_TIMING_2_ACBI(info.ac_bias_intrpt) |
+ LCDC_RASTER_TIMING_2_HSWMSB(timing.hsync_len.typ) |
+ LCDC_RASTER_TIMING_2_VERMSB(timing.vactive.typ) |
+ LCDC_RASTER_TIMING_2_HBPMSB(timing.hback_porch.typ) |
+ LCDC_RASTER_TIMING_2_HFPMSB(timing.hfront_porch.typ);
+
+ if (timing.flags & DISPLAY_FLAGS_VSYNC_LOW)
+ reg |= LCDC_RASTER_TIMING_2_VSYNC_INVERT;
+
+ if (timing.flags & DISPLAY_FLAGS_HSYNC_LOW)
+ reg |= LCDC_RASTER_TIMING_2_HSYNC_INVERT;
+
+ if (info.invert_pxl_clk)
+ reg |= LCDC_RASTER_TIMING_2_PXCLK_INVERT;
+
+ if (info.sync_edge)
+ reg |= LCDC_RASTER_TIMING_2_HSVS_RISEFALL;
+
+ if (info.sync_ctrl)
+ reg |= LCDC_RASTER_TIMING_2_HSVS_CONTROL;
+
+ writel(reg, ®s->raster_timing2);
+
+ reg = LCDC_RASTER_CTRL_PALMODE_RAWDATA | LCDC_RASTER_CTRL_TFT_MODE |
+ LCDC_RASTER_CTRL_ENABLE | LCDC_RASTER_CTRL_REQDLY(info.fdd);
+
+ if (info.tft_alt_mode)
+ reg |= LCDC_RASTER_CTRL_TFT_ALT_ENABLE;
+
+ if (info.bpp == 24)
+ reg |= LCDC_RASTER_CTRL_TFT_24BPP_MODE;
+ else if (info.bpp == 32)
+ reg |= LCDC_RASTER_CTRL_TFT_24BPP_MODE |
+ LCDC_RASTER_CTRL_TFT_24BPP_UNPACK;
+
+ if (info.raster_order)
+ reg |= LCDC_RASTER_CTRL_DATA_ORDER;
+
+ writel(reg, ®s->raster_ctrl);
+
+ uc_priv->xsize = timing.hactive.typ;
+ uc_priv->ysize = timing.vactive.typ;
+ uc_priv->bpix = log_2_n_round_up(info.bpp);
+
+ err = panel_enable_backlight(panel);
+ if (err) {
+ dev_err(dev, "failed to enable panel backlight\n");
+ return err;
+ }
+
+ return 0;
+}
+
+static int tilcdc_of_to_plat(struct udevice *dev)
+{
+ struct tilcdc_priv *priv = dev_get_priv(dev);
+
+ priv->regs = (struct tilcdc_regs *)dev_read_addr(dev);
+ if ((fdt_addr_t)priv->regs == FDT_ADDR_T_NONE) {
+ dev_err(dev, "failed to get base address\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(dev, "LCD: base address=0x%x\n", (unsigned int)priv->regs);
+ return 0;
+}
+
+static int tilcdc_bind(struct udevice *dev)
+{
+ struct video_uc_plat *uc_plat = dev_get_uclass_plat(dev);
+
+ uc_plat->size = ((LCDC_MAX_WIDTH * LCDC_MAX_HEIGHT *
+ (1 << LCDC_MAX_LOG2_BPP)) >> 3) + 0x20;
+
+ dev_dbg(dev, "frame buffer size 0x%x\n", uc_plat->size);
+ return 0;
+}
+
+static const struct udevice_id tilcdc_ids[] = {
+ {.compatible = "ti,am33xx-tilcdc"},
+ {}
+};
+
+U_BOOT_DRIVER(tilcdc) = {
+ .name = "tilcdc",
+ .id = UCLASS_VIDEO,
+ .of_match = tilcdc_ids,
+ .bind = tilcdc_bind,
+ .of_to_plat = tilcdc_of_to_plat,
+ .probe = tilcdc_probe,
+ .remove = tilcdc_remove,
+ .priv_auto = sizeof(struct tilcdc_priv)
+};
diff --git a/drivers/video/ti/tilcdc.h b/drivers/video/ti/tilcdc.h
new file mode 100644
index 000000000000..2645921df651
--- /dev/null
+++ b/drivers/video/ti/tilcdc.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020 Dario Binacchi <dariobin at libero.it>
+ */
+
+#ifndef _TILCDC_H
+#define _TILCDC_H
+
+/**
+ * tilcdc_panel_info: Panel parameters
+ *
+ * @ac_bias: AC Bias Pin Frequency
+ * @ac_bias_intrpt: AC Bias Pin Transitions per Interrupt
+ * @dma_burst_sz: DMA burst size
+ * @bpp: Bits per pixel
+ * @fdd: FIFO DMA Request Delay
+ * @tft_alt_mode: TFT Alternative Signal Mapping (Only for active)
+ * @invert_pxl_clk: Invert pixel clock
+ * @sync_edge: Horizontal and Vertical Sync Edge: 0=rising 1=falling
+ * @sync_ctrl: Horizontal and Vertical Sync: Control: 0=ignore
+ * @raster_order: Raster Data Order Select: 1=Most-to-least 0=Least-to-most
+ * @fifo_th: DMA FIFO threshold
+ */
+struct tilcdc_panel_info {
+ u32 ac_bias;
+ u32 ac_bias_intrpt;
+ u32 dma_burst_sz;
+ u32 bpp;
+ u32 fdd;
+ bool tft_alt_mode;
+ bool invert_pxl_clk;
+ u32 sync_edge;
+ u32 sync_ctrl;
+ u32 raster_order;
+ u32 fifo_th;
+};
+
+#endif /* _TILCDC_H */
--
2.32.0
More information about the U-Boot
mailing list