[PATCH 1/3] imx: imx8mm_beacon: Eliminate a few extras to free up SPL space

[sbabic at denx.de]

> There are a few functions which are not essential for use in
> SPL, but they take up enough space to make other preferred
> features not fit.  Remove the extras.
> Signed-off-by: Adam Ford <aford173 at gmail.com>
> Reviewed-by: Fabio Estevam <festevam at denx.de>
> diff --git a/board/beacon/imx8mm/spl.c b/board/beacon/imx8mm/spl.c
> index a93cc93878..b0e9d918da 100644
> --- a/board/beacon/imx8mm/spl.c
> +++ b/board/beacon/imx8mm/spl.c
> @@ -44,11 +44,6 @@ static void spl_dram_init(void)
>  	ddr_init(&dram_timing);
>  }
>  
> -void spl_board_init(void)
> -{
> -	debug("Normal Boot\n");
> -}
> -
>  #ifdef CONFIG_SPL_LOAD_FIT
>  int board_fit_config_name_match(const char *name)
>  {
> diff --git a/configs/imx8mm_beacon_defconfig b/configs/imx8mm_beacon_defconfig
> index e37ce01c19..f6a1012d8a 100644
> --- a/configs/imx8mm_beacon_defconfig
> +++ b/configs/imx8mm_beacon_defconfig
> @@ -29,7 +29,6 @@ CONFIG_DEFAULT_FDT_FILE="imx8mm-beacon-kit.dtb"
>  CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
>  CONFIG_SPL_BSS_START_ADDR=0x910000
>  CONFIG_SPL_BSS_MAX_SIZE=0x2000
> -CONFIG_SPL_BOARD_INIT=y
>  # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
>  CONFIG_SPL_STACK=0x920000
>  CONFIG_SYS_SPL_MALLOC=y
> @@ -88,12 +87,9 @@ CONFIG_DM_PCA953X=y
>  CONFIG_DM_I2C=y
>  CONFIG_SUPPORT_EMMC_BOOT=y
>  CONFIG_MMC_IO_VOLTAGE=y
> -CONFIG_SPL_MMC_IO_VOLTAGE=y
>  CONFIG_MMC_UHS_SUPPORT=y
> -CONFIG_SPL_MMC_UHS_SUPPORT=y
>  CONFIG_MMC_HS400_ES_SUPPORT=y
>  CONFIG_MMC_HS400_SUPPORT=y
> -CONFIG_SPL_MMC_HS400_SUPPORT=y
>  CONFIG_FSL_USDHC=y
>  CONFIG_MTD=y
>  CONFIG_DM_MTD=y
> @@ -113,14 +109,12 @@ CONFIG_PINCTRL_IMX8M=y
>  CONFIG_POWER_DOMAIN=y
>  CONFIG_IMX8M_POWER_DOMAIN=y
>  CONFIG_DM_PMIC=y
> +# CONFIG_SPL_PMIC_CHILDREN is not set
>  CONFIG_DM_PMIC_BD71837=y
>  CONFIG_SPL_DM_PMIC_BD71837=y
>  CONFIG_DM_REGULATOR=y
> -CONFIG_SPL_DM_REGULATOR=y
>  CONFIG_DM_REGULATOR_BD71837=y
> -CONFIG_SPL_DM_REGULATOR_BD71837=y
>  CONFIG_DM_REGULATOR_FIXED=y
> -CONFIG_SPL_DM_REGULATOR_FIXED=y
>  CONFIG_DM_REGULATOR_GPIO=y
>  CONFIG_DM_SERIAL=y
>  CONFIG_MXC_UART=y
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================