[PATCH v6 2/6] net: mvneta: Add support for AlleyCat5

Ramon Fried rfried.dev at gmail.com
Wed Nov 9 09:22:38 CET 2022


On Sat, Nov 5, 2022 at 6:24 AM Chris Packham <judge.packham at gmail.com> wrote:
>
> Add support for the AlleyCat5 SoC. This lacks the mbus from the other
> users of the mvneta.c driver so a new compatible string is needed to
> allow for a different window configuration.
>
> Signed-off-by: Chris Packham <judge.packham at gmail.com>
> Reviewed-by: Stefan Roese <sr at denx.de>
> ---
>
> (no changes since v3)
>
> Changes in v3:
> - Remove unnecessary changes to RX descriptor handling
> - Use dev_get_dma_range() to parse dma-ranges property from parent
>   device.
>
>  drivers/net/Kconfig  |  2 +-
>  drivers/net/mvneta.c | 43 ++++++++++++++++++++++++++++++++++++++++++-
>  2 files changed, 43 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> index 6bbbadc5ee..8df3dce6df 100644
> --- a/drivers/net/Kconfig
> +++ b/drivers/net/Kconfig
> @@ -448,7 +448,7 @@ config MVGBE
>
>  config MVNETA
>         bool "Marvell Armada XP/385/3700 network interface support"
> -       depends on ARMADA_XP || ARMADA_38X || ARMADA_3700
> +       depends on ARMADA_XP || ARMADA_38X || ARMADA_3700 || ALLEYCAT_5
>         select PHYLIB
>         select DM_MDIO
>         help
> diff --git a/drivers/net/mvneta.c b/drivers/net/mvneta.c
> index d2c42c4396..0fbfad11d4 100644
> --- a/drivers/net/mvneta.c
> +++ b/drivers/net/mvneta.c
> @@ -91,6 +91,8 @@ DECLARE_GLOBAL_DATA_PTR;
>  #define MVNETA_WIN_SIZE_MASK                   (0xffff0000)
>  #define MVNETA_BASE_ADDR_ENABLE                 0x2290
>  #define      MVNETA_BASE_ADDR_ENABLE_BIT       0x1
> +#define      MVNETA_AC5_CNM_DDR_TARGET         0x2
> +#define      MVNETA_AC5_CNM_DDR_ATTR           0xb
>  #define MVNETA_PORT_ACCESS_PROTECT              0x2294
>  #define      MVNETA_PORT_ACCESS_PROTECT_WIN0_RW        0x3
>  #define MVNETA_PORT_CONFIG                      0x2400
> @@ -282,6 +284,8 @@ struct mvneta_port {
>         struct gpio_desc phy_reset_gpio;
>         struct gpio_desc sfp_tx_disable_gpio;
>  #endif
> +
> +       uintptr_t dma_base;     /* base address for DMA address decoding */
>  };
>
>  /* The mvneta_tx_desc and mvneta_rx_desc structures describe the
> @@ -1343,6 +1347,29 @@ static void mvneta_conf_mbus_windows(struct mvneta_port *pp)
>         mvreg_write(pp, MVNETA_BASE_ADDR_ENABLE, win_enable);
>  }
>
> +static void mvneta_conf_ac5_cnm_xbar_windows(struct mvneta_port *pp)
> +{
> +       int i;
> +
> +       /* Clear all windows */
> +       for (i = 0; i < 6; i++) {
> +               mvreg_write(pp, MVNETA_WIN_BASE(i), 0);
> +               mvreg_write(pp, MVNETA_WIN_SIZE(i), 0);
> +
> +               if (i < 4)
> +                       mvreg_write(pp, MVNETA_WIN_REMAP(i), 0);
> +       }
> +
> +       /*
> +        * Setup window #0 base 0x0 to target XBAR port 2 (AMB2), attribute 0xb, size 4GB
> +        * AMB2 address decoder remaps 0x0 to DDR 64 bit base address
> +        */
> +       mvreg_write(pp, MVNETA_WIN_BASE(0),
> +                   (MVNETA_AC5_CNM_DDR_ATTR << 8) | MVNETA_AC5_CNM_DDR_TARGET);
> +       mvreg_write(pp, MVNETA_WIN_SIZE(0), 0xffff0000);
> +       mvreg_write(pp, MVNETA_BASE_ADDR_ENABLE, 0x3e);
> +}
> +
>  /* Power up the port */
>  static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
>  {
> @@ -1525,7 +1552,7 @@ static int mvneta_recv(struct udevice *dev, int flags, uchar **packetp)
>                  * No cache invalidation needed here, since the rx_buffer's are
>                  * located in a uncached memory region
>                  */
> -               *packetp = data;
> +               *packetp = data + pp->dma_base;
>
>                 /*
>                  * Only mark one descriptor as free
> @@ -1544,6 +1571,10 @@ static int mvneta_probe(struct udevice *dev)
>         struct ofnode_phandle_args sfp_args;
>  #endif
>         void *bd_space;
> +       phys_addr_t cpu;
> +       dma_addr_t bus;
> +       u64 size;
> +       int ret;
>
>         /*
>          * Allocate buffer area for descs and rx_buffers. This is only
> @@ -1577,9 +1608,18 @@ static int mvneta_probe(struct udevice *dev)
>         /* Configure MBUS address windows */
>         if (device_is_compatible(dev, "marvell,armada-3700-neta"))
>                 mvneta_bypass_mbus_windows(pp);
> +       else if (device_is_compatible(dev, "marvell,armada-ac5-neta"))
> +               mvneta_conf_ac5_cnm_xbar_windows(pp);
>         else
>                 mvneta_conf_mbus_windows(pp);
>
> +       /* fetch dma ranges property */
> +       ret = dev_get_dma_range(dev, &cpu, &bus, &size);
> +       if (!ret)
> +               pp->dma_base = cpu;
> +       else
> +               pp->dma_base = 0;
> +
>  #if CONFIG_IS_ENABLED(DM_GPIO)
>         if (!dev_read_phandle_with_args(dev, "sfp", NULL, 0, 0, &sfp_args) &&
>             ofnode_is_enabled(sfp_args.node))
> @@ -1620,6 +1660,7 @@ static const struct eth_ops mvneta_ops = {
>
>  static const struct udevice_id mvneta_ids[] = {
>         { .compatible = "marvell,armada-370-neta" },
> +       { .compatible = "marvell,armada-ac5-neta" },
>         { .compatible = "marvell,armada-xp-neta" },
>         { .compatible = "marvell,armada-3700-neta" },
>         { }
> --
> 2.38.1
>
Reviewed-by: Ramon Fried <rfried.dev at gmail.com>


More information about the U-Boot mailing list