LX2106A U-Boot: board_eth_init() not called any more

[Ioana Ciornei]

On Wed, Nov 09, 2022 at 02:29:56PM +0100, Stefan Roese wrote:
> Hi Ioana,
> 

[snip]

> > fsl-mc: Booting Management Complex ... SUCCESS
> > fsl-mc: Management Complex booted (version: 10.24.0, boot status: 0x1)
> > Hit any key to stop autoboot:  0
> > => setenv ethact DPMAC3 at usxgmii
> > => setenv ipaddr 10.0.0.1
> > => ping 10.0.0.2
> > DPMAC3 at usxgmii Waiting for PHY auto negotiation to complete.Using DPMAC3 at usxgmii device
> > host 10.0.0.2 is alive
> 
> Great. Many thanks for this testing this. I need to check what needs to
> be done on our custom LX2160 based board in the dts/dtsi files and
> corresponding drivers to fully support operation with DM_ETH enabled
> now.
> 

Mainly you would need to populate the dpmacX DTS nodes corresponding to
the interfaces enabled in your RCW setup and any PHY which they are
using. The 'fsl-lx2160a-rdb.dts' can be a reference for your board.

> BTW: You might want to send a patch removing the now obsolete
> board_eth_init() functions in board/freescale/*.
> 

Yes, I should do that since it's removed for good now.

Ioana